mirror of
https://github.com/FUjr/gl-infra-builder.git
synced 2025-12-16 17:15:08 +00:00
256 lines
6.2 KiB
Diff
256 lines
6.2 KiB
Diff
From 9d8aee76faf6c15a9259d57e99b76aa052187035 Mon Sep 17 00:00:00 2001
|
|
From: "GL.iNet-Hongjian.Zhang" <hongjian.zhang@gl-inet.com>
|
|
Date: Thu, 23 Sep 2021 11:48:04 +0800
|
|
Subject: [PATCH 1/2] ath79: add support for gl ar150
|
|
|
|
---
|
|
target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts | 74 +++++++++++++++++-----
|
|
target/linux/ath79/image/generic.mk | 10 ---
|
|
target/linux/ath79/image/nand.mk | 11 +++-
|
|
.../ath79/nand/base-files/etc/board.d/01_leds | 3 +
|
|
.../ath79/nand/base-files/etc/board.d/02_network | 1 +
|
|
5 files changed, 72 insertions(+), 27 deletions(-)
|
|
|
|
diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
|
|
index 6a13c1b..42edf5a 100644
|
|
--- a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
|
|
+++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts
|
|
@@ -1,45 +1,63 @@
|
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
-
|
|
-#include "ar9330.dtsi"
|
|
+/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
+#include "ar9330_glinet.dtsi"
|
|
+
|
|
/ {
|
|
model = "GL.iNet GL-AR150";
|
|
compatible = "glinet,gl-ar150", "qca,ar9330";
|
|
|
|
aliases {
|
|
- led-boot = &led_power;
|
|
- led-failsafe = &led_power;
|
|
- led-running = &led_power;
|
|
- led-upgrade = &led_power;
|
|
- label-mac-device = ð0;
|
|
+ serial0 = &uart;
|
|
+ };
|
|
+
|
|
+ gl_hw {
|
|
+ compatible = "gl-hw-info";
|
|
+
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ model = "ar150";
|
|
+ wan = "eth0";
|
|
+ lan = "eth1";
|
|
+ switch-button = "gpio-8";
|
|
+ reset-button = "gpio-11";
|
|
+ usb-port = "1-1";
|
|
+ factory_data {
|
|
+ device_mac = "art";
|
|
+ device_ddns = "art", "0x10";
|
|
+ device_sn_bak = "art", "0x20";
|
|
+ device_sn = "art", "0x30";
|
|
+ country_code = "art", "0x88";
|
|
+ };
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wlan {
|
|
- label = "orange:wlan";
|
|
+ label = "gl-ar150:red:wlan";
|
|
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
configurable {
|
|
- label = "green:configurable";
|
|
+ label = "gl-ar150:green:configurable";
|
|
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_power: power {
|
|
- label = "green:power";
|
|
+ label = "gl-ar150:green:power";
|
|
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
keys {
|
|
- compatible = "gpio-keys";
|
|
+ compatible = "gpio-keys-polled";
|
|
+ poll-interval = <100>;
|
|
|
|
manual {
|
|
label = "manual";
|
|
@@ -48,7 +66,7 @@
|
|
};
|
|
|
|
auto {
|
|
- label = "auto";
|
|
+ label = "BTN_8";
|
|
linux,code = <BTN_8>;
|
|
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
@@ -59,6 +77,19 @@
|
|
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
+ gpio-export {
|
|
+ compatible = "gpio-export";
|
|
+ gpio_usb_power {
|
|
+ gpio-export,name = "usb_power";
|
|
+ gpio-export,output = <1>;
|
|
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart {
|
|
+ status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
@@ -66,17 +97,27 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&usb {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ hub_port: port@1 {
|
|
+ reg = <1>;
|
|
+ #trigger-source-cells = <0>;
|
|
+ };
|
|
+};
|
|
&usb_phy {
|
|
status = "okay";
|
|
- gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&spi {
|
|
+ num-chipselects = <1>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
- spi-max-frequency = <50000000>;
|
|
+ spi-max-frequency = <104000000>;
|
|
reg = <0>;
|
|
|
|
partitions {
|
|
@@ -114,13 +155,15 @@
|
|
status = "okay";
|
|
|
|
mtd-mac-address = <&art 0x0>;
|
|
+
|
|
+ ifname = "eth0";
|
|
};
|
|
|
|
ð1 {
|
|
status = "okay";
|
|
|
|
mtd-mac-address = <&art 0x0>;
|
|
-
|
|
+ ifname = "eth1";
|
|
gmac-config {
|
|
device = <&gmac>;
|
|
|
|
@@ -131,7 +174,6 @@
|
|
|
|
&wmac {
|
|
status = "okay";
|
|
-
|
|
mtd-cal-data = <&art 0x1000>;
|
|
mtd-mac-address = <&art 0x0>;
|
|
};
|
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
|
index 9fba915..0799ae7 100644
|
|
--- a/target/linux/ath79/image/generic.mk
|
|
+++ b/target/linux/ath79/image/generic.mk
|
|
@@ -1157,16 +1157,6 @@ define Device/glinet_6416
|
|
endef
|
|
TARGET_DEVICES += glinet_6416
|
|
|
|
-define Device/glinet_gl-ar150
|
|
- SOC := ar9330
|
|
- DEVICE_VENDOR := GL.iNet
|
|
- DEVICE_MODEL := GL-AR150
|
|
- DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
- IMAGE_SIZE := 16000k
|
|
- SUPPORTED_DEVICES += gl-ar150
|
|
-endef
|
|
-TARGET_DEVICES += glinet_gl-ar150
|
|
-
|
|
define Device/glinet_gl-ar750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
|
|
index 32d8fb6..f45877e 100644
|
|
--- a/target/linux/ath79/image/nand.mk
|
|
+++ b/target/linux/ath79/image/nand.mk
|
|
@@ -77,6 +77,15 @@ define Device/domywifi_dw33d
|
|
endef
|
|
TARGET_DEVICES += domywifi_dw33d
|
|
|
|
+define Device/glinet_gl-ar150
|
|
+ SOC := ar9330
|
|
+ DEVICE_TITLE := GL.iNet GL-AR150
|
|
+ DEVICE_PACKAGES := kmod-usb2 block-mount
|
|
+ IMAGE_SIZE := 16000k
|
|
+ SUPPORTED_DEVICES += gl-ar150 glinet,gl-ar150
|
|
+endef
|
|
+TARGET_DEVICES += glinet_gl-ar150
|
|
+
|
|
define Device/glinet_gl-x300b-common
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
@@ -136,7 +145,7 @@ TARGET_DEVICES += glinet_gl-ar300m-nor
|
|
define Device/glinet_gl-mifi
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNET
|
|
- DEVICE_MODEL := GL-MiFi
|
|
+ DEVICE_MODEL := GL-MIFI
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-mifi glinet,gl-mifi
|
|
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
index 51cfe65..27f8ee2 100755
|
|
--- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
+++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
@@ -7,6 +7,9 @@ board_config_update
|
|
board=$(board_name)
|
|
|
|
case "$board" in
|
|
+glinet,gl-ar150)
|
|
+ ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
|
|
+ ;;
|
|
glinet,gl-ar300m-nand|\
|
|
glinet,gl-ar300m-nor)
|
|
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth1"
|
|
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
index 37fafaf..9be5bef 100755
|
|
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
@@ -25,6 +25,7 @@ ath79_setup_interfaces()
|
|
glinet,gl-ar300m-nand|\
|
|
glinet,gl-x300b-nor|\
|
|
glinet,gl-x300b-nor-nand|\
|
|
+ glinet,gl-ar150|\
|
|
glinet,gl-mifi)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
|
;;
|
|
--
|
|
2.7.4
|
|
|