mirror of
https://github.com/FUjr/gl-infra-builder.git
synced 2025-12-16 17:15:08 +00:00
367 lines
8.5 KiB
Diff
367 lines
8.5 KiB
Diff
From 21ee3befaa14358ee3587eb459c150c04f56cd78 Mon Sep 17 00:00:00 2001
|
|
From: "GL.iNet-Hongjian.Zhang" <hongjian.zhang@gl-inet.com>
|
|
Date: Thu, 23 Sep 2021 18:22:18 +0800
|
|
Subject: [PATCH 2/2] ath79: add support for gl usb150
|
|
|
|
---
|
|
target/linux/ath79/dts/ar9330_glinet_gl-usb150.dts | 136 +++++++++++++++++++++
|
|
target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts | 119 ------------------
|
|
.../generic/base-files/etc/board.d/02_network | 1 -
|
|
target/linux/ath79/image/generic.mk | 9 --
|
|
target/linux/ath79/image/nand.mk | 9 ++
|
|
.../ath79/nand/base-files/etc/board.d/01_leds | 4 +
|
|
.../ath79/nand/base-files/etc/board.d/02_network | 1 +
|
|
7 files changed, 150 insertions(+), 129 deletions(-)
|
|
create mode 100755 target/linux/ath79/dts/ar9330_glinet_gl-usb150.dts
|
|
delete mode 100644 target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts
|
|
|
|
diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-usb150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-usb150.dts
|
|
new file mode 100755
|
|
index 0000000..72848a5
|
|
--- /dev/null
|
|
+++ b/target/linux/ath79/dts/ar9330_glinet_gl-usb150.dts
|
|
@@ -0,0 +1,136 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
+/dts-v1/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+#include "ar9330_glinet.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "GL.iNet GL-USB150";
|
|
+ compatible = "glinet,gl-usb150", "qca,ar9330";
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart;
|
|
+ };
|
|
+
|
|
+ gl_hw {
|
|
+ compatible = "gl-hw-info";
|
|
+
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ model = "usb150";
|
|
+ lan = "eth0";
|
|
+ reset-button = "gpio-11";
|
|
+ factory_data {
|
|
+ device_mac = "art";
|
|
+ device_ddns = "art", "0x10";
|
|
+ device_sn_bak = "art", "0x20";
|
|
+ device_sn = "art", "0x30";
|
|
+ country_code = "art", "0x88";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ wlan {
|
|
+ label = "gl-usb150:orange:wlan";
|
|
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
|
+ linux,default-trigger = "phy0tpt";
|
|
+ };
|
|
+
|
|
+ led_power: power {
|
|
+ label = "gl-usb150:green:power";
|
|
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "on";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ keys {
|
|
+ compatible = "gpio-keys-polled";
|
|
+ poll-interval = <100>;
|
|
+
|
|
+ reset {
|
|
+ label = "reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+ };
|
|
+ gpio-export {
|
|
+ compatible = "gpio-export";
|
|
+ gpio_usb_power {
|
|
+ gpio-export,name = "gpio7";
|
|
+ gpio-export,output = <0>;
|
|
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi {
|
|
+ num-chipselects = <1>;
|
|
+ status = "okay";
|
|
+
|
|
+ flash@0 {
|
|
+ compatible = "jedec,spi-nor";
|
|
+ spi-max-frequency = <104000000>;
|
|
+ reg = <0>;
|
|
+
|
|
+ partitions {
|
|
+ compatible = "fixed-partitions";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x000000 0x040000>;
|
|
+ read-only;
|
|
+ };
|
|
+
|
|
+ partition@1 {
|
|
+ label = "u-boot-env";
|
|
+ reg = <0x040000 0x010000>;
|
|
+ };
|
|
+
|
|
+ partition@2 {
|
|
+ compatible = "denx,uimage";
|
|
+ label = "firmware";
|
|
+ reg = <0x050000 0xfa0000>;
|
|
+ };
|
|
+
|
|
+ art: partition@3 {
|
|
+ label = "art";
|
|
+ reg = <0xff0000 0x010000>;
|
|
+ read-only;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+ð0 {
|
|
+ status = "okay";
|
|
+
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+
|
|
+ gmac-config {
|
|
+ device = <&gmac>;
|
|
+
|
|
+ switch-phy-addr-swap = <0>;
|
|
+ switch-phy-swap = <0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+ð1 {
|
|
+ status = "okay";
|
|
+ compatible = "syscon", "simple-mfd";
|
|
+};
|
|
+
|
|
+&wmac {
|
|
+ status = "okay";
|
|
+ mtd-cal-data = <&art 0x1000>;
|
|
+ mtd-mac-address = <&art 0x0>;
|
|
+};
|
|
diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts b/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts
|
|
deleted file mode 100644
|
|
index d1c2654..0000000
|
|
--- a/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts
|
|
+++ /dev/null
|
|
@@ -1,119 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
-
|
|
-#include "ar9331.dtsi"
|
|
-
|
|
-#include <dt-bindings/gpio/gpio.h>
|
|
-#include <dt-bindings/input/input.h>
|
|
-
|
|
-/ {
|
|
- compatible = "glinet,gl-usb150", "qca,ar9331";
|
|
- model = "GL.iNet GL-USB150";
|
|
-
|
|
- aliases {
|
|
- led-boot = &led_power;
|
|
- led-failsafe = &led_power;
|
|
- led-running = &led_power;
|
|
- led-upgrade = &led_power;
|
|
- label-mac-device = ð0;
|
|
- };
|
|
-
|
|
- leds {
|
|
- compatible = "gpio-leds";
|
|
-
|
|
- wlan {
|
|
- label = "green:wlan";
|
|
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
|
- linux,default-trigger = "phy0tpt";
|
|
- };
|
|
-
|
|
- led_power: power {
|
|
- label = "green:power";
|
|
- gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
|
- default-state = "on";
|
|
- };
|
|
- };
|
|
-
|
|
- keys {
|
|
- compatible = "gpio-keys";
|
|
-
|
|
- reset {
|
|
- label = "reset";
|
|
- linux,code = <KEY_RESTART>;
|
|
- gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
|
- debounce-interval = <60>;
|
|
- };
|
|
- };
|
|
-
|
|
- gpio-export {
|
|
- compatible = "gpio-export";
|
|
-
|
|
- gpio_lan_reset {
|
|
- gpio-export,name = "lan:reset";
|
|
- gpio-export,output = <0>;
|
|
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
- };
|
|
- };
|
|
-};
|
|
-
|
|
-ð0 {
|
|
- status = "okay";
|
|
-
|
|
- mtd-mac-address = <&art 0x0>;
|
|
-
|
|
- gmac-config {
|
|
- device = <&gmac>;
|
|
- switch-phy-addr-swap = <0>;
|
|
- switch-phy-swap = <0>;
|
|
- };
|
|
-};
|
|
-
|
|
-ð1 {
|
|
- status = "okay";
|
|
-
|
|
- compatible = "syscon", "simple-mfd";
|
|
-};
|
|
-
|
|
-&spi {
|
|
- status = "okay";
|
|
-
|
|
- flash@0 {
|
|
- compatible = "jedec,spi-nor";
|
|
- spi-max-frequency = <33000000>;
|
|
- reg = <0>;
|
|
-
|
|
- partitions {
|
|
- compatible = "fixed-partitions";
|
|
- #address-cells = <1>;
|
|
- #size-cells = <1>;
|
|
-
|
|
- partition@0 {
|
|
- label = "u-boot";
|
|
- reg = <0x000000 0x040000>;
|
|
- read-only;
|
|
- };
|
|
-
|
|
- partition@40000 {
|
|
- label = "u-boot-env";
|
|
- reg = <0x040000 0x010000>;
|
|
- };
|
|
-
|
|
- partition@50000 {
|
|
- compatible = "denx,uimage";
|
|
- label = "firmware";
|
|
- reg = <0x050000 0xfa0000>;
|
|
- };
|
|
-
|
|
- art: partition@ff0000 {
|
|
- label = "art";
|
|
- reg = <0xff0000 0x010000>;
|
|
- read-only;
|
|
- };
|
|
- };
|
|
- };
|
|
-};
|
|
-
|
|
-&wmac {
|
|
- status = "okay";
|
|
-
|
|
- mtd-cal-data = <&art 0x1000>;
|
|
-};
|
|
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
|
index f446ba2..dedc9fc 100755
|
|
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
|
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
|
|
@@ -38,7 +38,6 @@ ath79_setup_interfaces()
|
|
engenius,ecb1750|\
|
|
engenius,ecb600|\
|
|
enterasys,ws-ap3705i|\
|
|
- glinet,gl-usb150|\
|
|
hak5,wifi-pineapple-nano|\
|
|
meraki,mr16|\
|
|
netgear,ex6400|\
|
|
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
|
|
index 0799ae7..cf3fce3 100644
|
|
--- a/target/linux/ath79/image/generic.mk
|
|
+++ b/target/linux/ath79/image/generic.mk
|
|
@@ -1167,15 +1167,6 @@ define Device/glinet_gl-ar750
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750
|
|
|
|
-define Device/glinet_gl-usb150
|
|
- SOC := ar9331
|
|
- DEVICE_VENDOR := GL.iNET
|
|
- DEVICE_MODEL := GL-USB150
|
|
- IMAGE_SIZE := 16000k
|
|
- SUPPORTED_DEVICES += gl-usb150
|
|
-endef
|
|
-TARGET_DEVICES += glinet_gl-usb150
|
|
-
|
|
define Device/glinet_gl-x750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
|
|
index f45877e..83ca331 100644
|
|
--- a/target/linux/ath79/image/nand.mk
|
|
+++ b/target/linux/ath79/image/nand.mk
|
|
@@ -86,6 +86,15 @@ define Device/glinet_gl-ar150
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar150
|
|
|
|
+define Device/glinet_gl-usb150
|
|
+ SOC := ar9330
|
|
+ DEVICE_TITLE := GL.iNet GL-USB150
|
|
+ DEVICE_PACKAGES := kmod-usb2 block-mount
|
|
+ IMAGE_SIZE := 16000k
|
|
+ SUPPORTED_DEVICES += gl-usb150 glinet,gl-usb150
|
|
+endef
|
|
+TARGET_DEVICES += glinet_gl-usb150
|
|
+
|
|
define Device/glinet_gl-x300b-common
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/01_leds b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
index 27f8ee2..24f03a0 100755
|
|
--- a/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
+++ b/target/linux/ath79/nand/base-files/etc/board.d/01_leds
|
|
@@ -10,6 +10,10 @@ case "$board" in
|
|
glinet,gl-ar150)
|
|
ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
|
|
;;
|
|
+glinet,gl-usb150)
|
|
+ ucidef_set_led_wlan "wlan" "WLAN" "gl-usb150:green:wlan" "phy0tpt"
|
|
+ ucidef_set_led_default "power" "POWER" "gl-usb150:green:power" "1"
|
|
+ ;;
|
|
glinet,gl-ar300m-nand|\
|
|
glinet,gl-ar300m-nor)
|
|
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth1"
|
|
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
index 9be5bef..06b664e 100755
|
|
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
|
|
@@ -9,6 +9,7 @@ ath79_setup_interfaces()
|
|
|
|
case "$board" in
|
|
aerohive,hiveap-121|\
|
|
+ glinet,gl-usb150|\
|
|
glinet,gl-e750)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
--
|
|
2.7.4
|
|
|