gl-infra-builder-FUjr/patches-22.03.2/4002-support-xe300-target.patch

From a9e608d23ddc98113ddeaf9f69d903e78f1b455d Mon Sep 17 00:00:00 2001
From: niyin <yin.ni@gl-inet.com>
Date: Sat, 28 Jan 2023 20:00:40 -0800
Subject: [PATCH] support xe300 target

---
 .../dts/qca9531_glinet_gl-xe300-nor-nand.dts  | 193 ++++++++++++++++++
 1 file changed, 193 insertions(+)
 create mode 100644 target/linux/ath79/dts/qca9531_glinet_gl-xe300-nor-nand.dts

diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-xe300-nor-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-xe300-nor-nand.dts
new file mode 100644
index 0000000000..7c703c7c81
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_glinet_gl-xe300-nor-nand.dts
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca953x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "glinet,gl-xe300-nor-nand", "qca,qca9531";
+	model = "GL.iNet GL-XE300(NOR/NAND)";
+	
+	gl_hw {
+                compatible = "gl-hw-info";
+
+                #address-cells = <1>;
+                #size-cells = <1>;
+                model = "xe300";
+                wan = "eth1";
+                lan = "eth0";
+                build-in-modem = "1-1.2";
+                reset-button = "gpio-3";
+                usb-port = "1-1.3";
+		flash_size = <128>;
+		radio = "mac80211";
+		microsd = "1-1.1";
+		mcu = "/dev/ttyUSB0,9600";
+		nand;
+		factory_data {
+                        device_mac = "art";
+                        device_ddns = "art", "0x10";
+                        device_sn_bak = "art", "0x20";
+                        device_sn = "art", "0x30";
+                        country_code = "art", "0x88";
+                };
+        };
+
+	gpio-export {
+		compatible = "gpio-export";
+
+		gpio_lte_power {
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			gpio-export,name = "lte_power";
+			gpio-export,output = <1>;
+		};
+
+		gpio_sd_detect {
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			gpio-export,name = "sd_detect";
+			gpio-export,output = <0>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan {
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+			label = "gl-xe300:green:lan";
+		};
+
+		wan {
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+			label = "gl-xe300:green:wan";
+		};
+
+		wlan {
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			label = "gl-xe300:green:wlan";
+			linux,default-trigger = "phy0tpt";
+		};
+
+		lte {
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			label = "gl-xe300:green:lte";
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "u-boot-env";
+				reg = <0x40000 0x10000>;
+			};
+
+			art: partition@50000 {
+				label = "art";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "kernel";
+				reg = <0x60000 0x400000>;
+			};
+
+			partition@460000 {
+				label = "nor_reserved";
+				reg = <0x460000 0xba0000>;
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "spi-nand";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x0 0x8000000>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth1 {
+	nvmem-cells = <&macaddr_art_0>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&wmac {
+	status = "okay";
+
+	mtd-cal-data = <&art 0x1000>;
+};
+
+&art {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_art_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+};
-- 
2.25.1