him411/immortalwrt-VIKINGYFY
1
0
Fork 0
mirror of https://github.com/VIKINGYFY/immortalwrt.git synced 2025-12-16 17:15:26 +00:00
Code Issues Packages Projects Releases Wiki Activity
0760f6f5ca
immortalwrt-VIKINGYFY/target/linux/generic/backport-6.12/783-01-v6.18-net-dsa-Move-KS8995-to-the-DSA-subsystem.patch
Linus Walleij 73504d0b27 kernel: kmod-dsa-ks8995: Backport DSA patches 
Converts the KS8995 "phy" driver to a proper DSA switch.
Currently the upstream only supports the "none" tag
but this is a good improvement already.

Make the old module depend on kernel 6.6 and the new
one depend on !6.6.

The Realtek RTL8261n patch needs to be refreshed
because of textual dependencies.

Realtek RTL838x DSA and phy patches also have textual
dependencies and need to be refreshed.

The Mediatek in-flight DSA patch and related patches
also need to be rebased and refreshed.

Link: https://github.com/openwrt/openwrt/pull/19970
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-09-15 08:34:55 +02:00

1093 lines
29 KiB
Diff
Raw Blame History

From 9c370f7f92b0232fe925ca2caefb5e3126a0357d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 13 Aug 2025 23:43:03 +0200
Subject: [PATCH 1/4] net: dsa: Move KS8995 to the DSA subsystem
By reading the datasheets for the KS8995 it is obvious that this
is a 100 Mbit DSA switch.
Let us start the refactoring by moving it to the DSA subsystem to
preserve development history.
Verified that the chip still probes the same after this patch
provided CONFIG_HAVE_NET_DSA, CONFIG_NET_DSA and CONFIG_DSA_KS8995
are selected.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250813-ks8995-to-dsa-v1-1-75c359ede3a5@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/dsa/Kconfig | 7 +++++++
drivers/net/dsa/Makefile | 1 +
drivers/net/{phy/spi_ks8995.c => dsa/ks8995.c} | 0
drivers/net/phy/Kconfig | 4 ----
drivers/net/phy/Makefile | 1 -
5 files changed, 8 insertions(+), 5 deletions(-)
rename drivers/net/{phy/spi_ks8995.c => dsa/ks8995.c} (100%)
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -98,6 +98,13 @@ config NET_DSA_RZN1_A5PSW
This driver supports the A5PSW switch, which is embedded in Renesas
RZ/N1 SoC.
+config NET_DSA_KS8995
+ tristate "Micrel KS8995 family 5-ports 10/100 Ethernet switches"
+ depends on SPI
+ help
+ This driver supports the Micrel KS8995 family of 10/100 Mbit ethernet
+ switches, managed over SPI.
+
config NET_DSA_SMSC_LAN9303
tristate
select NET_DSA_TAG_LAN9303
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o
ifdef CONFIG_NET_DSA_LOOP
obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o
endif
+obj-$(CONFIG_NET_DSA_KS8995) += ks8995.o
obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -443,7 +443,3 @@ config XILINX_GMII2RGMII
Ethernet physical media devices and the Gigabit Ethernet controller.
endif # PHYLIB
-
-config MICREL_KS8995MA
- tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
- depends on SPI
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -77,7 +77,6 @@ obj-$(CONFIG_MARVELL_88X2222_PHY) += mar
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
obj-y += mediatek/
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
-obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
obj-$(CONFIG_MICROCHIP_T1_PHY) += microchip_t1.o
--- /dev/null
+++ b/drivers/net/dsa/ks8995.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches
+ *
+ * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * This file was based on: drivers/spi/at25.c
+ * Copyright (C) 2006 David Brownell
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+
+#include <linux/spi/spi.h>
+
+#define DRV_VERSION "0.1.1"
+#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver"
+
+/* ------------------------------------------------------------------------ */
+
+#define KS8995_REG_ID0 0x00 /* Chip ID0 */
+#define KS8995_REG_ID1 0x01 /* Chip ID1 */
+
+#define KS8995_REG_GC0 0x02 /* Global Control 0 */
+#define KS8995_REG_GC1 0x03 /* Global Control 1 */
+#define KS8995_REG_GC2 0x04 /* Global Control 2 */
+#define KS8995_REG_GC3 0x05 /* Global Control 3 */
+#define KS8995_REG_GC4 0x06 /* Global Control 4 */
+#define KS8995_REG_GC5 0x07 /* Global Control 5 */
+#define KS8995_REG_GC6 0x08 /* Global Control 6 */
+#define KS8995_REG_GC7 0x09 /* Global Control 7 */
+#define KS8995_REG_GC8 0x0a /* Global Control 8 */
+#define KS8995_REG_GC9 0x0b /* Global Control 9 */
+
+#define KS8995_REG_PC(p, r) ((0x10 * p) + r) /* Port Control */
+#define KS8995_REG_PS(p, r) ((0x10 * p) + r + 0xe) /* Port Status */
+
+#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */
+#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */
+#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */
+#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */
+#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */
+#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */
+#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */
+#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */
+
+#define KS8995_REG_MAC0 0x68 /* MAC address 0 */
+#define KS8995_REG_MAC1 0x69 /* MAC address 1 */
+#define KS8995_REG_MAC2 0x6a /* MAC address 2 */
+#define KS8995_REG_MAC3 0x6b /* MAC address 3 */
+#define KS8995_REG_MAC4 0x6c /* MAC address 4 */
+#define KS8995_REG_MAC5 0x6d /* MAC address 5 */
+
+#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */
+#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */
+#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */
+#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */
+#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */
+#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */
+#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */
+#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */
+#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */
+#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */
+
+#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */
+
+#define KS8995_REGS_SIZE 0x80
+#define KSZ8864_REGS_SIZE 0x100
+#define KSZ8795_REGS_SIZE 0x100
+
+#define ID1_CHIPID_M 0xf
+#define ID1_CHIPID_S 4
+#define ID1_REVISION_M 0x7
+#define ID1_REVISION_S 1
+#define ID1_START_SW 1 /* start the switch */
+
+#define FAMILY_KS8995 0x95
+#define FAMILY_KSZ8795 0x87
+#define CHIPID_M 0
+#define KS8995_CHIP_ID 0x00
+#define KSZ8864_CHIP_ID 0x01
+#define KSZ8795_CHIP_ID 0x09
+
+#define KS8995_CMD_WRITE 0x02U
+#define KS8995_CMD_READ 0x03U
+
+#define KS8995_RESET_DELAY 10 /* usec */
+
+enum ks8995_chip_variant {
+ ks8995,
+ ksz8864,
+ ksz8795,
+ max_variant
+};
+
+struct ks8995_chip_params {
+ char *name;
+ int family_id;
+ int chip_id;
+ int regs_size;
+ int addr_width;
+ int addr_shift;
+};
+
+static const struct ks8995_chip_params ks8995_chip[] = {
+ [ks8995] = {
+ .name = "KS8995MA",
+ .family_id = FAMILY_KS8995,
+ .chip_id = KS8995_CHIP_ID,
+ .regs_size = KS8995_REGS_SIZE,
+ .addr_width = 8,
+ .addr_shift = 0,
+ },
+ [ksz8864] = {
+ .name = "KSZ8864RMN",
+ .family_id = FAMILY_KS8995,
+ .chip_id = KSZ8864_CHIP_ID,
+ .regs_size = KSZ8864_REGS_SIZE,
+ .addr_width = 8,
+ .addr_shift = 0,
+ },
+ [ksz8795] = {
+ .name = "KSZ8795CLX",
+ .family_id = FAMILY_KSZ8795,
+ .chip_id = KSZ8795_CHIP_ID,
+ .regs_size = KSZ8795_REGS_SIZE,
+ .addr_width = 12,
+ .addr_shift = 1,
+ },
+};
+
+struct ks8995_switch {
+ struct spi_device *spi;
+ struct mutex lock;
+ struct gpio_desc *reset_gpio;
+ struct bin_attribute regs_attr;
+ const struct ks8995_chip_params *chip;
+ int revision_id;
+};
+
+static const struct spi_device_id ks8995_id[] = {
+ {"ks8995", ks8995},
+ {"ksz8864", ksz8864},
+ {"ksz8795", ksz8795},
+ { }
+};
+MODULE_DEVICE_TABLE(spi, ks8995_id);
+
+static const struct of_device_id ks8895_spi_of_match[] = {
+ { .compatible = "micrel,ks8995" },
+ { .compatible = "micrel,ksz8864" },
+ { .compatible = "micrel,ksz8795" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
+
+static inline u8 get_chip_id(u8 val)
+{
+ return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
+}
+
+static inline u8 get_chip_rev(u8 val)
+{
+ return (val >> ID1_REVISION_S) & ID1_REVISION_M;
+}
+
+/* create_spi_cmd - create a chip specific SPI command header
+ * @ks: pointer to switch instance
+ * @cmd: SPI command for switch
+ * @address: register address for command
+ *
+ * Different chip families use different bit pattern to address the switches
+ * registers:
+ *
+ * KS8995: 8bit command + 8bit address
+ * KSZ8795: 3bit command + 12bit address + 1bit TR (?)
+ */
+static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd,
+ unsigned address)
+{
+ u16 result = cmd;
+
+ /* make room for address (incl. address shift) */
+ result <<= ks->chip->addr_width + ks->chip->addr_shift;
+ /* add address */
+ result |= address << ks->chip->addr_shift;
+ /* SPI protocol needs big endian */
+ return cpu_to_be16(result);
+}
+/* ------------------------------------------------------------------------ */
+static int ks8995_read(struct ks8995_switch *ks, char *buf,
+ unsigned offset, size_t count)
+{
+ __be16 cmd;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset);
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&ks->lock);
+ err = spi_sync(ks->spi, &m);
+ mutex_unlock(&ks->lock);
+
+ return err ? err : count;
+}
+
+static int ks8995_write(struct ks8995_switch *ks, char *buf,
+ unsigned offset, size_t count)
+{
+ __be16 cmd;
+ struct spi_transfer t[2];
+ struct spi_message m;
+ int err;
+
+ cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset);
+ spi_message_init(&m);
+
+ memset(&t, 0, sizeof(t));
+
+ t[0].tx_buf = &cmd;
+ t[0].len = sizeof(cmd);
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].tx_buf = buf;
+ t[1].len = count;
+ spi_message_add_tail(&t[1], &m);
+
+ mutex_lock(&ks->lock);
+ err = spi_sync(ks->spi, &m);
+ mutex_unlock(&ks->lock);
+
+ return err ? err : count;
+}
+
+static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf)
+{
+ return ks8995_read(ks, buf, addr, 1) != 1;
+}
+
+static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val)
+{
+ char buf = val;
+
+ return ks8995_write(ks, &buf, addr, 1) != 1;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int ks8995_stop(struct ks8995_switch *ks)
+{
+ return ks8995_write_reg(ks, KS8995_REG_ID1, 0);
+}
+
+static int ks8995_start(struct ks8995_switch *ks)
+{
+ return ks8995_write_reg(ks, KS8995_REG_ID1, 1);
+}
+
+static int ks8995_reset(struct ks8995_switch *ks)
+{
+ int err;
+
+ err = ks8995_stop(ks);
+ if (err)
+ return err;
+
+ udelay(KS8995_RESET_DELAY);
+
+ return ks8995_start(ks);
+}
+
+static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct ks8995_switch *ks8995;
+
+ dev = kobj_to_dev(kobj);
+ ks8995 = dev_get_drvdata(dev);
+
+ return ks8995_read(ks8995, buf, off, count);
+}
+
+static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
+{
+ struct device *dev;
+ struct ks8995_switch *ks8995;
+
+ dev = kobj_to_dev(kobj);
+ ks8995 = dev_get_drvdata(dev);
+
+ return ks8995_write(ks8995, buf, off, count);
+}
+
+/* ks8995_get_revision - get chip revision
+ * @ks: pointer to switch instance
+ *
+ * Verify chip family and id and get chip revision.
+ */
+static int ks8995_get_revision(struct ks8995_switch *ks)
+{
+ int err;
+ u8 id0, id1, ksz8864_id;
+
+ /* read family id */
+ err = ks8995_read_reg(ks, KS8995_REG_ID0, &id0);
+ if (err) {
+ err = -EIO;
+ goto err_out;
+ }
+
+ /* verify family id */
+ if (id0 != ks->chip->family_id) {
+ dev_err(&ks->spi->dev, "chip family id mismatch: expected 0x%02x but 0x%02x read\n",
+ ks->chip->family_id, id0);
+ err = -ENODEV;
+ goto err_out;
+ }
+
+ switch (ks->chip->family_id) {
+ case FAMILY_KS8995:
+ /* try reading chip id at CHIP ID1 */
+ err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1);
+ if (err) {
+ err = -EIO;
+ goto err_out;
+ }
+
+ /* verify chip id */
+ if ((get_chip_id(id1) == CHIPID_M) &&
+ (get_chip_id(id1) == ks->chip->chip_id)) {
+ /* KS8995MA */
+ ks->revision_id = get_chip_rev(id1);
+ } else if (get_chip_id(id1) != CHIPID_M) {
+ /* KSZ8864RMN */
+ err = ks8995_read_reg(ks, KS8995_REG_ID1, &ksz8864_id);
+ if (err) {
+ err = -EIO;
+ goto err_out;
+ }
+
+ if ((ksz8864_id & 0x80) &&
+ (ks->chip->chip_id == KSZ8864_CHIP_ID)) {
+ ks->revision_id = get_chip_rev(id1);
+ }
+
+ } else {
+ dev_err(&ks->spi->dev, "unsupported chip id for KS8995 family: 0x%02x\n",
+ id1);
+ err = -ENODEV;
+ }
+ break;
+ case FAMILY_KSZ8795:
+ /* try reading chip id at CHIP ID1 */
+ err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1);
+ if (err) {
+ err = -EIO;
+ goto err_out;
+ }
+
+ if (get_chip_id(id1) == ks->chip->chip_id) {
+ ks->revision_id = get_chip_rev(id1);
+ } else {
+ dev_err(&ks->spi->dev, "unsupported chip id for KSZ8795 family: 0x%02x\n",
+ id1);
+ err = -ENODEV;
+ }
+ break;
+ default:
+ dev_err(&ks->spi->dev, "unsupported family id: 0x%02x\n", id0);
+ err = -ENODEV;
+ break;
+ }
+err_out:
+ return err;
+}
+
+static const struct bin_attribute ks8995_registers_attr = {
+ .attr = {
+ .name = "registers",
+ .mode = 0600,
+ },
+ .size = KS8995_REGS_SIZE,
+ .read = ks8995_registers_read,
+ .write = ks8995_registers_write,
+};
+
+/* ------------------------------------------------------------------------ */
+static int ks8995_probe(struct spi_device *spi)
+{
+ struct ks8995_switch *ks;
+ int err;
+ int variant = spi_get_device_id(spi)->driver_data;
+
+ if (variant >= max_variant) {
+ dev_err(&spi->dev, "bad chip variant %d\n", variant);
+ return -ENODEV;
+ }
+
+ ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL);
+ if (!ks)
+ return -ENOMEM;
+
+ mutex_init(&ks->lock);
+ ks->spi = spi;
+ ks->chip = &ks8995_chip[variant];
+
+ ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
+ GPIOD_OUT_HIGH);
+ err = PTR_ERR_OR_ZERO(ks->reset_gpio);
+ if (err) {
+ dev_err(&spi->dev,
+ "failed to get reset gpio: %d\n", err);
+ return err;
+ }
+
+ err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset");
+ if (err)
+ return err;
+
+ /* de-assert switch reset */
+ /* FIXME: this likely requires a delay */
+ gpiod_set_value_cansleep(ks->reset_gpio, 0);
+
+ spi_set_drvdata(spi, ks);
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ err = spi_setup(spi);
+ if (err) {
+ dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
+ return err;
+ }
+
+ err = ks8995_get_revision(ks);
+ if (err)
+ return err;
+
+ memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr));
+ ks->regs_attr.size = ks->chip->regs_size;
+
+ err = ks8995_reset(ks);
+ if (err)
+ return err;
+
+ sysfs_attr_init(&ks->regs_attr.attr);
+ err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr);
+ if (err) {
+ dev_err(&spi->dev, "unable to create sysfs file, err=%d\n",
+ err);
+ return err;
+ }
+
+ dev_info(&spi->dev, "%s device found, Chip ID:%x, Revision:%x\n",
+ ks->chip->name, ks->chip->chip_id, ks->revision_id);
+
+ return 0;
+}
+
+static void ks8995_remove(struct spi_device *spi)
+{
+ struct ks8995_switch *ks = spi_get_drvdata(spi);
+
+ sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr);
+
+ /* assert reset */
+ gpiod_set_value_cansleep(ks->reset_gpio, 1);
+}
+
+/* ------------------------------------------------------------------------ */
+static struct spi_driver ks8995_driver = {
+ .driver = {
+ .name = "spi-ks8995",
+ .of_match_table = ks8895_spi_of_match,
+ },
+ .probe = ks8995_probe,
+ .remove = ks8995_remove,
+ .id_table = ks8995_id,
+};
+
+module_spi_driver(ks8995_driver);
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_LICENSE("GPL v2");
--- a/drivers/net/phy/spi_ks8995.c
+++ /dev/null
@@ -1,506 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SPI driver for Micrel/Kendin KS8995M and KSZ8864RMN ethernet switches
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: drivers/spi/at25.c
- * Copyright (C) 2006 David Brownell
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-
-#include <linux/spi/spi.h>
-
-#define DRV_VERSION "0.1.1"
-#define DRV_DESC "Micrel KS8995 Ethernet switch SPI driver"
-
-/* ------------------------------------------------------------------------ */
-
-#define KS8995_REG_ID0 0x00 /* Chip ID0 */
-#define KS8995_REG_ID1 0x01 /* Chip ID1 */
-
-#define KS8995_REG_GC0 0x02 /* Global Control 0 */
-#define KS8995_REG_GC1 0x03 /* Global Control 1 */
-#define KS8995_REG_GC2 0x04 /* Global Control 2 */
-#define KS8995_REG_GC3 0x05 /* Global Control 3 */
-#define KS8995_REG_GC4 0x06 /* Global Control 4 */
-#define KS8995_REG_GC5 0x07 /* Global Control 5 */
-#define KS8995_REG_GC6 0x08 /* Global Control 6 */
-#define KS8995_REG_GC7 0x09 /* Global Control 7 */
-#define KS8995_REG_GC8 0x0a /* Global Control 8 */
-#define KS8995_REG_GC9 0x0b /* Global Control 9 */
-
-#define KS8995_REG_PC(p, r) ((0x10 * p) + r) /* Port Control */
-#define KS8995_REG_PS(p, r) ((0x10 * p) + r + 0xe) /* Port Status */
-
-#define KS8995_REG_TPC0 0x60 /* TOS Priority Control 0 */
-#define KS8995_REG_TPC1 0x61 /* TOS Priority Control 1 */
-#define KS8995_REG_TPC2 0x62 /* TOS Priority Control 2 */
-#define KS8995_REG_TPC3 0x63 /* TOS Priority Control 3 */
-#define KS8995_REG_TPC4 0x64 /* TOS Priority Control 4 */
-#define KS8995_REG_TPC5 0x65 /* TOS Priority Control 5 */
-#define KS8995_REG_TPC6 0x66 /* TOS Priority Control 6 */
-#define KS8995_REG_TPC7 0x67 /* TOS Priority Control 7 */
-
-#define KS8995_REG_MAC0 0x68 /* MAC address 0 */
-#define KS8995_REG_MAC1 0x69 /* MAC address 1 */
-#define KS8995_REG_MAC2 0x6a /* MAC address 2 */
-#define KS8995_REG_MAC3 0x6b /* MAC address 3 */
-#define KS8995_REG_MAC4 0x6c /* MAC address 4 */
-#define KS8995_REG_MAC5 0x6d /* MAC address 5 */
-
-#define KS8995_REG_IAC0 0x6e /* Indirect Access Control 0 */
-#define KS8995_REG_IAC1 0x6f /* Indirect Access Control 0 */
-#define KS8995_REG_IAD7 0x70 /* Indirect Access Data 7 */
-#define KS8995_REG_IAD6 0x71 /* Indirect Access Data 6 */
-#define KS8995_REG_IAD5 0x72 /* Indirect Access Data 5 */
-#define KS8995_REG_IAD4 0x73 /* Indirect Access Data 4 */
-#define KS8995_REG_IAD3 0x74 /* Indirect Access Data 3 */
-#define KS8995_REG_IAD2 0x75 /* Indirect Access Data 2 */
-#define KS8995_REG_IAD1 0x76 /* Indirect Access Data 1 */
-#define KS8995_REG_IAD0 0x77 /* Indirect Access Data 0 */
-
-#define KSZ8864_REG_ID1 0xfe /* Chip ID in bit 7 */
-
-#define KS8995_REGS_SIZE 0x80
-#define KSZ8864_REGS_SIZE 0x100
-#define KSZ8795_REGS_SIZE 0x100
-
-#define ID1_CHIPID_M 0xf
-#define ID1_CHIPID_S 4
-#define ID1_REVISION_M 0x7
-#define ID1_REVISION_S 1
-#define ID1_START_SW 1 /* start the switch */
-
-#define FAMILY_KS8995 0x95
-#define FAMILY_KSZ8795 0x87
-#define CHIPID_M 0
-#define KS8995_CHIP_ID 0x00
-#define KSZ8864_CHIP_ID 0x01
-#define KSZ8795_CHIP_ID 0x09
-
-#define KS8995_CMD_WRITE 0x02U
-#define KS8995_CMD_READ 0x03U
-
-#define KS8995_RESET_DELAY 10 /* usec */
-
-enum ks8995_chip_variant {
- ks8995,
- ksz8864,
- ksz8795,
- max_variant
-};
-
-struct ks8995_chip_params {
- char *name;
- int family_id;
- int chip_id;
- int regs_size;
- int addr_width;
- int addr_shift;
-};
-
-static const struct ks8995_chip_params ks8995_chip[] = {
- [ks8995] = {
- .name = "KS8995MA",
- .family_id = FAMILY_KS8995,
- .chip_id = KS8995_CHIP_ID,
- .regs_size = KS8995_REGS_SIZE,
- .addr_width = 8,
- .addr_shift = 0,
- },
- [ksz8864] = {
- .name = "KSZ8864RMN",
- .family_id = FAMILY_KS8995,
- .chip_id = KSZ8864_CHIP_ID,
- .regs_size = KSZ8864_REGS_SIZE,
- .addr_width = 8,
- .addr_shift = 0,
- },
- [ksz8795] = {
- .name = "KSZ8795CLX",
- .family_id = FAMILY_KSZ8795,
- .chip_id = KSZ8795_CHIP_ID,
- .regs_size = KSZ8795_REGS_SIZE,
- .addr_width = 12,
- .addr_shift = 1,
- },
-};
-
-struct ks8995_switch {
- struct spi_device *spi;
- struct mutex lock;
- struct gpio_desc *reset_gpio;
- struct bin_attribute regs_attr;
- const struct ks8995_chip_params *chip;
- int revision_id;
-};
-
-static const struct spi_device_id ks8995_id[] = {
- {"ks8995", ks8995},
- {"ksz8864", ksz8864},
- {"ksz8795", ksz8795},
- { }
-};
-MODULE_DEVICE_TABLE(spi, ks8995_id);
-
-static const struct of_device_id ks8895_spi_of_match[] = {
- { .compatible = "micrel,ks8995" },
- { .compatible = "micrel,ksz8864" },
- { .compatible = "micrel,ksz8795" },
- { },
-};
-MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
-
-static inline u8 get_chip_id(u8 val)
-{
- return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
-}
-
-static inline u8 get_chip_rev(u8 val)
-{
- return (val >> ID1_REVISION_S) & ID1_REVISION_M;
-}
-
-/* create_spi_cmd - create a chip specific SPI command header
- * @ks: pointer to switch instance
- * @cmd: SPI command for switch
- * @address: register address for command
- *
- * Different chip families use different bit pattern to address the switches
- * registers:
- *
- * KS8995: 8bit command + 8bit address
- * KSZ8795: 3bit command + 12bit address + 1bit TR (?)
- */
-static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd,
- unsigned address)
-{
- u16 result = cmd;
-
- /* make room for address (incl. address shift) */
- result <<= ks->chip->addr_width + ks->chip->addr_shift;
- /* add address */
- result |= address << ks->chip->addr_shift;
- /* SPI protocol needs big endian */
- return cpu_to_be16(result);
-}
-/* ------------------------------------------------------------------------ */
-static int ks8995_read(struct ks8995_switch *ks, char *buf,
- unsigned offset, size_t count)
-{
- __be16 cmd;
- struct spi_transfer t[2];
- struct spi_message m;
- int err;
-
- cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset);
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = &cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].rx_buf = buf;
- t[1].len = count;
- spi_message_add_tail(&t[1], &m);
-
- mutex_lock(&ks->lock);
- err = spi_sync(ks->spi, &m);
- mutex_unlock(&ks->lock);
-
- return err ? err : count;
-}
-
-static int ks8995_write(struct ks8995_switch *ks, char *buf,
- unsigned offset, size_t count)
-{
- __be16 cmd;
- struct spi_transfer t[2];
- struct spi_message m;
- int err;
-
- cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset);
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = &cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].tx_buf = buf;
- t[1].len = count;
- spi_message_add_tail(&t[1], &m);
-
- mutex_lock(&ks->lock);
- err = spi_sync(ks->spi, &m);
- mutex_unlock(&ks->lock);
-
- return err ? err : count;
-}
-
-static inline int ks8995_read_reg(struct ks8995_switch *ks, u8 addr, u8 *buf)
-{
- return ks8995_read(ks, buf, addr, 1) != 1;
-}
-
-static inline int ks8995_write_reg(struct ks8995_switch *ks, u8 addr, u8 val)
-{
- char buf = val;
-
- return ks8995_write(ks, &buf, addr, 1) != 1;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int ks8995_stop(struct ks8995_switch *ks)
-{
- return ks8995_write_reg(ks, KS8995_REG_ID1, 0);
-}
-
-static int ks8995_start(struct ks8995_switch *ks)
-{
- return ks8995_write_reg(ks, KS8995_REG_ID1, 1);
-}
-
-static int ks8995_reset(struct ks8995_switch *ks)
-{
- int err;
-
- err = ks8995_stop(ks);
- if (err)
- return err;
-
- udelay(KS8995_RESET_DELAY);
-
- return ks8995_start(ks);
-}
-
-static ssize_t ks8995_registers_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
-{
- struct device *dev;
- struct ks8995_switch *ks8995;
-
- dev = kobj_to_dev(kobj);
- ks8995 = dev_get_drvdata(dev);
-
- return ks8995_read(ks8995, buf, off, count);
-}
-
-static ssize_t ks8995_registers_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count)
-{
- struct device *dev;
- struct ks8995_switch *ks8995;
-
- dev = kobj_to_dev(kobj);
- ks8995 = dev_get_drvdata(dev);
-
- return ks8995_write(ks8995, buf, off, count);
-}
-
-/* ks8995_get_revision - get chip revision
- * @ks: pointer to switch instance
- *
- * Verify chip family and id and get chip revision.
- */
-static int ks8995_get_revision(struct ks8995_switch *ks)
-{
- int err;
- u8 id0, id1, ksz8864_id;
-
- /* read family id */
- err = ks8995_read_reg(ks, KS8995_REG_ID0, &id0);
- if (err) {
- err = -EIO;
- goto err_out;
- }
-
- /* verify family id */
- if (id0 != ks->chip->family_id) {
- dev_err(&ks->spi->dev, "chip family id mismatch: expected 0x%02x but 0x%02x read\n",
- ks->chip->family_id, id0);
- err = -ENODEV;
- goto err_out;
- }
-
- switch (ks->chip->family_id) {
- case FAMILY_KS8995:
- /* try reading chip id at CHIP ID1 */
- err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1);
- if (err) {
- err = -EIO;
- goto err_out;
- }
-
- /* verify chip id */
- if ((get_chip_id(id1) == CHIPID_M) &&
- (get_chip_id(id1) == ks->chip->chip_id)) {
- /* KS8995MA */
- ks->revision_id = get_chip_rev(id1);
- } else if (get_chip_id(id1) != CHIPID_M) {
- /* KSZ8864RMN */
- err = ks8995_read_reg(ks, KS8995_REG_ID1, &ksz8864_id);
- if (err) {
- err = -EIO;
- goto err_out;
- }
-
- if ((ksz8864_id & 0x80) &&
- (ks->chip->chip_id == KSZ8864_CHIP_ID)) {
- ks->revision_id = get_chip_rev(id1);
- }
-
- } else {
- dev_err(&ks->spi->dev, "unsupported chip id for KS8995 family: 0x%02x\n",
- id1);
- err = -ENODEV;
- }
- break;
- case FAMILY_KSZ8795:
- /* try reading chip id at CHIP ID1 */
- err = ks8995_read_reg(ks, KS8995_REG_ID1, &id1);
- if (err) {
- err = -EIO;
- goto err_out;
- }
-
- if (get_chip_id(id1) == ks->chip->chip_id) {
- ks->revision_id = get_chip_rev(id1);
- } else {
- dev_err(&ks->spi->dev, "unsupported chip id for KSZ8795 family: 0x%02x\n",
- id1);
- err = -ENODEV;
- }
- break;
- default:
- dev_err(&ks->spi->dev, "unsupported family id: 0x%02x\n", id0);
- err = -ENODEV;
- break;
- }
-err_out:
- return err;
-}
-
-static const struct bin_attribute ks8995_registers_attr = {
- .attr = {
- .name = "registers",
- .mode = 0600,
- },
- .size = KS8995_REGS_SIZE,
- .read = ks8995_registers_read,
- .write = ks8995_registers_write,
-};
-
-/* ------------------------------------------------------------------------ */
-static int ks8995_probe(struct spi_device *spi)
-{
- struct ks8995_switch *ks;
- int err;
- int variant = spi_get_device_id(spi)->driver_data;
-
- if (variant >= max_variant) {
- dev_err(&spi->dev, "bad chip variant %d\n", variant);
- return -ENODEV;
- }
-
- ks = devm_kzalloc(&spi->dev, sizeof(*ks), GFP_KERNEL);
- if (!ks)
- return -ENOMEM;
-
- mutex_init(&ks->lock);
- ks->spi = spi;
- ks->chip = &ks8995_chip[variant];
-
- ks->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
- GPIOD_OUT_HIGH);
- err = PTR_ERR_OR_ZERO(ks->reset_gpio);
- if (err) {
- dev_err(&spi->dev,
- "failed to get reset gpio: %d\n", err);
- return err;
- }
-
- err = gpiod_set_consumer_name(ks->reset_gpio, "switch-reset");
- if (err)
- return err;
-
- /* de-assert switch reset */
- /* FIXME: this likely requires a delay */
- gpiod_set_value_cansleep(ks->reset_gpio, 0);
-
- spi_set_drvdata(spi, ks);
-
- spi->mode = SPI_MODE_0;
- spi->bits_per_word = 8;
- err = spi_setup(spi);
- if (err) {
- dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
- return err;
- }
-
- err = ks8995_get_revision(ks);
- if (err)
- return err;
-
- memcpy(&ks->regs_attr, &ks8995_registers_attr, sizeof(ks->regs_attr));
- ks->regs_attr.size = ks->chip->regs_size;
-
- err = ks8995_reset(ks);
- if (err)
- return err;
-
- sysfs_attr_init(&ks->regs_attr.attr);
- err = sysfs_create_bin_file(&spi->dev.kobj, &ks->regs_attr);
- if (err) {
- dev_err(&spi->dev, "unable to create sysfs file, err=%d\n",
- err);
- return err;
- }
-
- dev_info(&spi->dev, "%s device found, Chip ID:%x, Revision:%x\n",
- ks->chip->name, ks->chip->chip_id, ks->revision_id);
-
- return 0;
-}
-
-static void ks8995_remove(struct spi_device *spi)
-{
- struct ks8995_switch *ks = spi_get_drvdata(spi);
-
- sysfs_remove_bin_file(&spi->dev.kobj, &ks->regs_attr);
-
- /* assert reset */
- gpiod_set_value_cansleep(ks->reset_gpio, 1);
-}
-
-/* ------------------------------------------------------------------------ */
-static struct spi_driver ks8995_driver = {
- .driver = {
- .name = "spi-ks8995",
- .of_match_table = ks8895_spi_of_match,
- },
- .probe = ks8995_probe,
- .remove = ks8995_remove,
- .id_table = ks8995_id,
-};
-
-module_spi_driver(ks8995_driver);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink