mirror of
https://github.com/VIKINGYFY/immortalwrt.git
synced 2025-12-16 17:15:26 +00:00
344bb7f916
Hardware specification:
SoC: MediaTek MT7981B
Flash: ESMT F50L1G41LB 128MB
RAM: ESMT M15T2G16128A DDR3 256MB
Ethernet: 3x 1G
Button: Reset, WPS
MAC addresses
LAN: Label MAC (stored in Factory partition offset 0x1fef20)
WAN: LAN + 1
WiFi: LAN
Official LED layout, from left to right:
[power] [internet] [wps] [wifi] [lan3/2/1] [wan]
Redefinition for OpenWrt:
[power]: used for led-boot, led-failsafe, and led-running
[internet]: used for WAN RX/TX indication
[wps]: used for led-upgrade
[wifi] and [lan3/2/1]: unchanged
[wan]: used for WAN link indication
Installing OpenWrt:
- Setup a tftp server on your PC. Copy
xxx-preloader.bin, xxx-bl31-uboot.fip and
xxx-initramfs.itb to tftp root directory.
- Connect to the router via ssh or telnet,
username: useradmin, password is the web
login password of the router.
- Backup all critical flash partitions with
the following commands where x.x.x.x is
the IP of your PC.
IP=x.x.x.x
cd /dev
for d in /sys/class/mtd/mtd?; do
if [ "$(cat $d/name)" = "BL2" ]; then
tftp -l $(basename $d) -r bl2.img -p $IP
elif [ "$(cat $d/name)" = "FIP" ]; then
tftp -l $(basename $d) -r fip.bin -p $IP
elif [ "$(cat $d/name)" = "Factory" ]; then
tftp -l $(basename $d) -r factory.bin -p $IP
fi
done
for d in /sys/devices/virtual/ubi/ubi0/ubi0_*; do
[ "$(cat $d/name)" != "customer" ] && continue
tftp -l $(basename $d) -r customer -p $IP
break
done
- Flash with the following commands:
cd /tmp
tftp -r xxx-preloader.bin -g x.x.x.x
tftp -r xxx-bl31-uboot.fip -g x.x.x.x
mtd write xxx-preloader.bin spi0.0
mtd write xxx-bl31-uboot.fip FIP
mtd erase ubi
- Set a static ip(192.168.1.254) for your PC.
And then reboot the router. It will run
initramfs image automatically.
- After openwrt boots up, perform sysupgrade
via web UI.
Reverting to the vendor firmware:
- Setup a tftp server on your PC with ip
address 192.168.1.254. And make sure
bl2.img, fip.bin, factory.bin and customer
are located in tftp root directory.
- Power off the router.
- Press and hold WPS key, then power on
the router.
- Release WPS key, when internet/wifi/wps
leds are blinking.
- Wait until internet/wifi/wps leds light
up, power off the router.
- Press and hold reset key, power up the
router, release reset key 15s later.
- Connect to http://192.168.1.1, now you
can upload vendor .bin firmware.
Uboot netconsole:
Uboot netconsole can be enabled by WPS
or reset key.
- Setup a linux PC with ip 192.168.1.254.
Open a new terminal and execute
'stty -isig -echo cbreak; nc -lup 6666'
- Press and hold WPS(or reset) key, then
power on the router.
- Release key once internet/wifi/wps leds
are all on.
NOTE: don't hold the key more than 5s
after internet/wifi/wps leds on, or it
will try to revert to vendor firmware.
- 5s later, uboot bootmenu will show on
the terminal.
Signed-off-by: Zhiwei Cao <bfdeh@126.com>
Link: https://github.com/openwrt/openwrt/pull/18631
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
161 lines
3.6 KiB
Plaintext
161 lines
3.6 KiB
Plaintext
#
|
|
# Copyright (C) 2021 OpenWrt.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
ubootenv_add_mmc_default() {
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x0" "0x40000" "0x40000" "1"
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x40000" "0x40000" "0x40000" "1"
|
|
}
|
|
|
|
ubootenv_add_nor_default() {
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
ubootenv_add_mtd "u-boot-env" "0x20000" "0x20000" "0x20000" "1"
|
|
}
|
|
|
|
case "$board" in
|
|
abt,asr3000|\
|
|
acer,predator-w6x-ubootmod|\
|
|
asus,zenwifi-bt8-ubootmod|\
|
|
cmcc,a10-ubootmod|\
|
|
comfast,cf-wr632ax-ubootmod|\
|
|
cudy,tr3000-v1-ubootmod|\
|
|
h3c,magic-nx30-pro|\
|
|
imou,hx21|\
|
|
jcg,q30-pro|\
|
|
konka,komi-a31|\
|
|
mercusys,mr90x-v1-ubi|\
|
|
netcore,n60|\
|
|
netcore,n60-pro|\
|
|
netis,nx30v2|\
|
|
netis,nx31|\
|
|
nokia,ea0326gmp|\
|
|
openwrt,one|\
|
|
qihoo,360t7|\
|
|
routerich,ax3000-ubootmod|\
|
|
snr,snr-cpe-ax2|\
|
|
tplink,tl-xdr4288|\
|
|
tplink,tl-xdr6086|\
|
|
tplink,tl-xdr6088|\
|
|
tplink,tl-xtr8488|\
|
|
xiaomi,mi-router-ax3000t-ubootmod|\
|
|
xiaomi,mi-router-wr30u-ubootmod|\
|
|
xiaomi,redmi-router-ax6000-ubootmod|\
|
|
zyxel,ex5601-t0-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
acer,predator-w6|\
|
|
acer,predator-w6d|\
|
|
acer,vero-w6m|\
|
|
glinet,gl-mt2500|\
|
|
glinet,gl-mt6000|\
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000|\
|
|
huasifei,wh3000|\
|
|
nradio,c8-668gl)
|
|
ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
|
|
;;
|
|
asiarf,ap7986-003|\
|
|
cetron,ct3003|\
|
|
comfast,cf-wr632ax|\
|
|
edgecore,eap111|\
|
|
netgear,wax220|\
|
|
zbtlink,zbt-z8102ax|\
|
|
zbtlink,zbt-z8103ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
asus,rt-ax59u)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
|
|
;;
|
|
bananapi,bpi-r3|\
|
|
bananapi,bpi-r3-mini|\
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-lite|\
|
|
bananapi,bpi-r4-poe|\
|
|
cmcc,rax3000m|\
|
|
jdcloud,re-cp-03)
|
|
. /lib/upgrade/fit.sh
|
|
export_fitblk_bootdev
|
|
case "$CI_METHOD" in
|
|
ubi)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
emmc)
|
|
bootdev=${EMMC_KERN_DEV%%p[0-9]*}
|
|
ubootenv_add_mmc_default "${bootdev#/dev/}"
|
|
;;
|
|
default)
|
|
ubootenv_add_nor_default
|
|
;;
|
|
esac
|
|
;;
|
|
buffalo,wsr-6000ax8|\
|
|
mercusys,mr80x-v3|\
|
|
mercusys,mr85x|\
|
|
mercusys,mr90x-v1|\
|
|
routerich,ax3000|\
|
|
routerich,ax3000-v1|\
|
|
tenbay,wr3000k|\
|
|
tplink,re6000xd)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
;;
|
|
comfast,cf-e393ax|\
|
|
iptime,ax3000m)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
|
;;
|
|
dlink,aquila-pro-ai-m30-a1|\
|
|
dlink,aquila-pro-ai-m60-a1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
|
;;
|
|
gatonetworks,gdsp)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
glinet,gl-mt3000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
|
;;
|
|
openembed,som7981)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8733a|\
|
|
smartrg,sdg-8734)
|
|
ubootenv_add_mmc "u-boot-env" "mmcblk0" "0x0" "0x8000" "0x8000"
|
|
;;
|
|
teltonika,rutc50)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
tplink,archer-ax80-v1|\
|
|
tplink,be450)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
|
|
;;
|
|
ubnt,unifi-6-plus)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
|
;;
|
|
xiaomi,mi-router-ax3000t|\
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,redmi-router-ax6000-stock)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
zyxel,ex5601-t0)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5700-telenor)
|
|
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|