qualcommax: ipq50xx: add support for Linksys MX2000 and MX5500

Add support for Linksys MX2000 (Atlas 6) and MX5500 (Atlas 6 Pro).
These devices are completely identical except for the secondary wifi
chip used for 5Ghz: QCN6102 is used on MX2000 while QCN9024 is used
on MX5500

Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Winbond W634GU6NB-11 (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi: MX2000: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
         MX5500: QCN9024 (4x4:4 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
            QCA8337 switch (4 Ports 10/100/1000 GBASE-T)
* Flash: Macronix MX35UF2GE4AD (256 MiB)
* LEDs: 1x multi-color PWM LED
* Buttons: 1x WPS (GPIO 27 Active Low)
           1x Reset (GPIO 28 Acive Low)

Flash instructions (in case of MX2000, else replace with MX5500 images):
1. On OEM firmware, login to the device (typically at http://192.168.1.1) and click 'CA'
in the bottom right corner -> Connectivity -> Manual Upgrade. Alternatively, browse to
http://<router IP>/fwupdate.html.
Upgrade firmware using openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin image.
Optionally install on second partition, after first boot check actual partition:
fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin kernel
and in case of 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin alt_kernel
2. Installation using serial connection from OEM firmware (default login: root, password: admin):
fw_printenv -n boot_part
In case of 2:
flash_erase /dev/mtd12 0 0
nandwrite -p /dev/mtd12 openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin
or in case of 1:
flash_erase /dev/mtd14 0 0
nandwrite -p /dev/mtd14 openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin
After first boot install firmware on second partition:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin kernel
or:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin alt_kernel
3. Back to the OEM firmware.
Download firmware from OEM website:
MX2000: https://support.linksys.com/kb/article/585-en/
MX5500: https://support.linksys.com/kb/article/587-en/
From serial or SSH:
fw_printenv boot_part
in case of 1:
mtd -r -e alt_kernel -n write FW_MX2000_1.1.7.210469_prod.img alt_kernel
else in case of 2:
mtd -r -e kernel -n write FW_MX2000_1.1.7.210469_prod.img kernel

Signed-off-by: George Moussalem <george.moussalem@outlook.com>

package/base-files/files/sbin/sysupgrade

@@ -20,6 +20,7 @@ CONF_IMAGE=
 CONF_BACKUP_LIST=0
 CONF_BACKUP=
 CONF_RESTORE=
+CURR_PARTITION=0
 NEED_IMAGE=
 HELP=0
 TEST=0
@@ -50,6 +51,7 @@ while [ -n "$1" ]; do
 		-r|--restore-backup) CONF_RESTORE="$2" NEED_IMAGE=1; shift;;
 		-l|--list-backup) CONF_BACKUP_LIST=1;;
 		-f) CONF_IMAGE="$2"; shift;;
+		-s) CURR_PARTITION=1;;
 		-F|--force) export FORCE=1;;
 		-T|--test) TEST=1;;
 		-h|--help) HELP=1; break;;
@@ -79,6 +81,7 @@ upgrade-option:
 	-p           do not attempt to restore the partition table after flash.
 	-k           include in backup a list of current installed packages at
 	             $INSTALLED_PACKAGES
+	-s           stay on current partition (for dual firmware devices)
 	-T | --test
 	             Verify image and config .tar.gz but do not actually flash.
 	-F | --force
@@ -416,6 +419,7 @@ else
 	json_add_string command "$COMMAND"
 	json_add_object options
 	json_add_int save_partitions "$SAVE_PARTITIONS"
+	[ $CURR_PARTITION -eq 1 ] && json_add_boolean curr_partition 1
 	json_close_object
 
 	ubus call system sysupgrade "$(json_dump)"

package/boot/uboot-envtools/files/qualcommax_ipq50xx

@@ -0,0 +1,22 @@
+[ -e /etc/config/ubootenv ] && exit 0
+
+touch /etc/config/ubootenv
+
+. /lib/uboot-envtools.sh
+. /lib/functions.sh
+
+board=$(board_name)
+
+case "$board" in
+linksys,mx2000|\
+linksys,mx5500)
+	idx="$(find_mtd_index u_env)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
+	;;
+esac
+
+config_load ubootenv
+config_foreach ubootenv_add_app_config
+
+exit 0

package/firmware/ipq-wifi/Makefile

@@ -37,8 +37,10 @@ ALLWIFIBOARDS:= \
 	dynalink_dl-wrx36 \
 	edgecore_eap102 \
 	edimax_cax1800 \
+  linksys_mx2000 \
 	linksys_mx4200 \
 	linksys_mx5300 \
+  linksys_mx5500 \
 	linksys_mx8500 \
 	linksys_whw03 \
 	netgear_lbr20 \
@@ -168,8 +170,10 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,linksys_mx2000,Linksys MX2000))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
+$(eval $(call generate-ipq-wifi-package,linksys_mx5500,Linksys MX5500))
 $(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
 $(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx2000.dts

@@ -0,0 +1,695 @@
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Linksys MX2000";
+	compatible = "linksys,mx2000", "qcom,ipq5018";
+
+	aliases {
+		ethernet0 = &dp1;
+		ethernet1 = &dp2;
+		led-boot = &led_system_blue;
+		led-failsafe = &led_system_red;
+		led-running = &led_system_blue;
+		led-upgrade = &led_system_red;
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		bootargs-append = " root=/dev/ubiblock0_0 coherent_pool=2M";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps-button {
+			label = "wps";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset-button {
+			label = "reset";
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		led_system_red: red {
+			label = "red:system";
+			pwms = <&pwm 3 1250000>;
+			max-brightness = <255>;
+		};
+
+		green {
+			label = "green:system";
+			pwms = <&pwm 0 1250000>;
+			max-brightness = <255>;
+		};
+
+		led_system_blue: blue {
+			label = "blue:system";
+			pwms = <&pwm 1 1250000>;
+			max-brightness = <255>;
+			//linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		tz_appps@4a400000 {
+			no-map;
+			reg = <0x0 0x4a400000 0x0 0x400000>;
+		};
+		
+		q6_mem_regions: q6_mem_regions@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x3000000>;
+		};
+
+		/* from stock DTS:
+		q6_code_data: q6_code_data@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x60000>;
+		};
+
+		q6_ipq5018_data: q6_ipq5018_data@4c400000 {
+			no-map;
+			reg = <0x0 0x4c400000 0x0 0xe00000>;
+		};
+
+		q6_m3_region: m3_dump@4d200000 {
+			no-map;
+			reg = <0x0 0x4d200000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4d300000 {
+			no-map;
+			reg = <0x0 0x4d300000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4d400000 {
+			no-map;
+			reg = <0x0 0x4d400000 0x0 0x200000>;
+		};
+
+		q6_qcn6122_data1: q6_qcn6122_data1@4d600000 {
+			no-map;
+			reg = <0x0 0x4d600000 0x0 0x1000000>;
+		};
+
+		q6_qcn6122_m3_1: q6_qcn6122_m3_1@4e600000 {
+			no-map;
+			reg = <0x0 0x4e600000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_1: q6_qcn6122_etr_1@4e700000 {
+			no-map;
+			reg = <0x0 0x4e700000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_1: q6_qcn6122_caldb_1@4e800000 {
+			no-map;
+			reg = <0x0 0x4e800000 0x0 0x500000>;
+		};
+
+		q6_qcn6122_data2: q6_qcn6122_data20@4ed00000 {
+			no-map;
+			reg = <0x0 0x4ed00000 0x0 0x1000000>;
+		};
+
+		q6_qcn6122_m3_2: q6_qcn6122_m3_2@4fd00000 {
+			no-map;
+			reg = <0x0 0x4fd00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_etr_2: q6_qcn6122_etr_2@4fe00000 {
+			no-map;
+			reg = <0x0 0x4fe00000 0x0 0x100000>;
+		};
+
+		q6_qcn6122_caldb_2: q6_qcn6122_caldb_2@4ff00000 {
+			no-map;
+			reg = <0x0 0x4ff00000 0x0 0x500000>;
+		};
+		*/
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+	qcom,port_phyinfo {
+		// MAC0 -> GE Phy -> QCA8337 Phy4
+		port@0 {
+			port_id = <1>;
+			mdiobus = <&mdio0>;
+			phy_address = <7>;
+			// status = "disabled";
+		};
+
+		// MAC1 ---SGMII---> QCA8337 SerDes
+		port@1 {
+			port_id = <2>;
+			forced-speed = <1000>;
+			forced-duplex = <1>;
+		};
+	};
+};
+
+// MAC0 -> GE Phy
+&dp1 {
+	/*
+	 * ===============================================================
+	 *     _______________________         _______________________
+	 *    |        IPQ5018        |       |        QCA8337        |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | | MAC0 |---| GE Phy |-+--UTP--+-|  Phy4  |---| MAC5 | |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC0 | |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    |_______________________|       |_______________________|
+	 *
+	 * ===============================================================
+	 *
+	 * Current drivers don't support such topology. So dp1 and ge_phy
+	 * are useless. But they can't be disabled dut to qca-ssdk use
+	 * ge_phy to detect IPQ5018 dummy switch.
+	 */
+	status = "okay";
+};
+
+// MAC1 ---SGMII---> QCA8337 SerDes
+&dp2 {
+	status = "okay";
+	phy-mode = "sgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+// IPQ5018 GE Phy -> QCA8337 Phy1
+&ge_phy {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio1_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	// QCA8337 Phy0 -> IPQ5018 GE Phy
+	qca8337_0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	// QCA8337 Phy1 -> WAN
+	qca8337_1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	// QCA8337 Phy2 -> LAN1
+	qca8337_2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	// QCA8337 Phy3 -> LAN2
+	qca8337_3: ethernet-phy@3 {
+		reg = <3>;
+	};
+
+	// QCA8337 Phy4 -> LAN3
+	qca8337_4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	// QCA8337 switch
+	switch1: ethernet-switch@17 {
+		compatible = "qca,qca8337";
+		reg = <17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "cpu1";
+				phy-handle = <&qca8337_0>;
+				status = "disabled";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&qca8337_1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&qca8337_2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan2";
+				phy-handle = <&qca8337_3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan3";
+				phy-handle = <&qca8337_4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				phy-mode = "sgmii";
+				ethernet = <&dp2>;
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+
+	#pwm-cells = <2>;
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+};
+
+&qfprom {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partitions {
+		status = "disabled";
+	};
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-engine = <&qpic_nand>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "0:MIBIB";
+				reg = <0x00080000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "0:QSEE";
+				reg = <0x00100000 0x100000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "0:DEVCFG";
+				reg = <0x00200000 0x40000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "0:CDT";
+				reg = <0x00240000 0x40000>;
+				read-only;
+			};
+
+			partition@280000 {
+				label = "0:APPSBLENV";
+				reg = <0x00280000 0x20000>;
+			};
+
+			partition@300000 {
+				label = "0:APPSBL";
+				reg = <0x00300000 0x140000>;
+				read-only;
+			};
+
+			partition@440000 {
+				compatible = "nvmem-cells";
+				label = "0:ART";
+				reg = <0x00440000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "0:TRAINING";
+				reg = <0x00540000 0x80000>;
+				read-only;
+			};
+
+			partition@5c0000 {
+				label = "u_env";
+				reg = <0x005c0000 0x80000>;
+			};
+
+			partition@640000 {
+				label = "s_env";
+				reg = <0x00640000 0x40000>;
+			};
+
+			partition@680000 {
+				label = "devinfo";
+				reg = <0x00680000 0x40000>;
+				read-only;
+			};
+
+			partition@6c0000 {
+				label = "kernel";
+				reg = <0x006c0000 0x5200000>;
+			};
+
+			partition@ec0000 {
+				label = "rootfs";
+				reg = <0x0ec0000 0x4a00000>;
+			};
+
+			partition@58c0000 {
+				label = "alt_kernel";
+				reg = <0x058c0000 0x5200000>;
+			};
+
+			partition@60c0000 {
+				label = "alt_rootfs";
+				reg = <0x060c0000 0x4a00000>;
+			};
+
+			partition@aac0000 {
+				label = "sysdiag";
+				reg = <0x0aac0000 0x200000>;
+				read-only;
+			};
+
+			partition@acc0000 {
+				label = "syscfg";
+				reg = <0x0acc0000 0x4400000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&tlmm {
+	button_pins: button-state {
+		pins = "gpio27", "gpio28";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	mdio1_pins: mdio-state {
+		mdc-pins {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	pwm_pins: pwm-state {
+		mux_1 {
+			pins = "gpio1";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "pwm3";
+			drive-strength = <8>;
+		};
+
+		mux_3 {
+			pins = "gpio46";
+			function = "pwm0";
+			drive-strength = <8>;
+		};
+	};
+
+	qpic_pins: qpic-state {
+		clock-pins {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	serial_0_pins: uart0-state {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		bias-disable;
+	};
+};
+
+&tsens {
+	status = "okay";
+};
+
+&q6v5_wcss {
+	status = "okay";
+
+	memory-region = <&q6_mem_regions>;
+	firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
+					"ath11k/IPQ5018/hw1.0/m3_fw.mdt",
+					"ath11k/qcn6122/hw1.0/m3_fw.mdt";
+
+	/*qcom,bootargs_smem = <507>;*/	/* hard-coded in mpd driver */
+	boot-args = 
+			</*       type: */ 0x1 /* PCIE0 */
+			 /*     length: */ 4
+			 /*      PD id: */ 3
+			 /* reset GPIO: */ 15
+			 /*   reserved: */ 0 0>;
+	
+	// IPQ5018
+	q6_wcss_pd1: pd-1 {
+		firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+		resets =
+			<&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_BCR>,
+			<&gcc GCC_CE_BCR>;
+		reset-names =
+			"wcss_aon_reset",
+			"wcss_reset",
+			"ce_reset";
+
+		clocks =
+			<&gcc GCC_WCSS_AHB_S_CLK>,
+			<&gcc GCC_WCSS_ACMT_CLK>,
+			<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names =
+			"gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		// qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+		interrupts-extended =
+			<&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names =
+			"fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		qcom,smem-states =
+			<&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names =
+			"shutdown",
+			"stop",
+			"spawn";
+		status = "okay";
+	};
+
+	// QCN6102 6G
+	q6_wcss_pd2: pd-2 {
+		firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+		interrupts-extended =
+			<&wcss_smp2p_in 16 0>,
+			<&wcss_smp2p_in 17 0>,
+			<&wcss_smp2p_in 20 0>,
+			<&wcss_smp2p_in 19 0>;
+		interrupt-names =
+			"fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		qcom,smem-states =
+			<&wcss_smp2p_out 16>,
+			<&wcss_smp2p_out 17>,
+			<&wcss_smp2p_out 18>;
+		qcom,smem-state-names =
+			"shutdown",
+			"stop",
+			"spawn";
+		status = "disabled";
+	};
+
+	// QCN6102 5G
+	q6_wcss_pd3: pd-3 {
+		firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+		interrupts-extended =
+			<&wcss_smp2p_in 24 0>,
+			<&wcss_smp2p_in 25 0>,
+			<&wcss_smp2p_in 28 0>,
+			<&wcss_smp2p_in 27 0>;
+		interrupt-names =
+			"fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		qcom,smem-states =
+			<&wcss_smp2p_out 24>,
+			<&wcss_smp2p_out 25>,
+			<&wcss_smp2p_out 26>;
+		qcom,smem-state-names =
+			"shutdown",
+			"stop",
+			"spawn";
+		status = "okay";
+	};
+};
+
+&wifi0 {
+	// IPQ5018
+	qcom,rproc = <&q6_wcss_pd1>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,ath11k-calibration-variant = "Linksys-MX2000";
+	qcom,ath11k-fw-memory-mode = <2>;
+	qcom,bdf-addr = <0x4c400000>;
+
+	status = "okay";
+};
+
+&wifi1 {
+	// QCN6102 5G
+	qcom,rproc = <&q6_wcss_pd3>;
+	qcom,userpd-subsys-name = "q6v5_wcss_userpd3";
+	qcom,ath11k-calibration-variant = "Linksys-MX2000";
+	qcom,ath11k-fw-memory-mode = <2>;
+	qcom,bdf-addr = <0x4d100000>;
+	qcom,m3-dump-addr = <0x4df00000>;
+
+	status = "okay";
+};

target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-mx5500.dts

@@ -0,0 +1,612 @@
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+#include "ipq5018-ess.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Linksys MX5500";
+	compatible = "linksys,mx5500", "qcom,ipq5018";
+
+	aliases {
+		ethernet0 = &dp1;
+		ethernet1 = &dp2;
+		led-boot = &led_system_blue;
+		led-failsafe = &led_system_red;
+		led-running = &led_system_blue;
+		led-upgrade = &led_system_red;
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		bootargs-append = " root=/dev/ubiblock0_0 coherent_pool=2M";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		wps-button {
+			label = "wps";
+			gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		reset-button {
+			label = "reset";
+			gpios = <&tlmm 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		led_system_red: red {
+			label = "red:system";
+			pwms = <&pwm 3 1250000>;
+			max-brightness = <255>;
+		};
+
+		green {
+			label = "green:system";
+			pwms = <&pwm 0 1250000>;
+			max-brightness = <255>;
+		};
+
+		led_system_blue: blue {
+			label = "blue:system";
+			pwms = <&pwm 1 1250000>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		q6_mem_regions: q6_mem_regions@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x3000000>;
+		};
+
+		/*
+		q6_region: wcnss@4b000000 {
+			no-map;
+			reg = <0x0 0x4b000000 0x0 0x01800000>;
+		};
+
+		q6_m3_region: m3_dump@4c800000 {
+			no-map;
+			reg = <0x0 0x4c800000 0x0 0x100000>;
+		};
+
+		q6_etr_region: q6_etr_dump@4c900000 {
+			no-map;
+			reg = <0x0 0x4c900000 0x0 0x100000>;
+		};
+
+		q6_caldb_region: q6_caldb_region@4cd00000 {
+			no-map;
+			reg = <0x0 0x4cd00000 0x0 0x200000>;
+		};
+
+		qcn9000_pcie0@4cc00000 {
+			no-map;
+			reg = <0x0 0x4cc00000 0x0 0x01e00000>;
+		};
+		*/
+
+		mhi_region1: dma_pool1@4ea00000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x0 0x4ea00000 0x0 0x01000000>;
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
+
+	qcom,port_phyinfo {
+		// MAC0 -> GE Phy -> QCA8337 Phy4
+		port@0 {
+			port_id = <1>;
+			mdiobus = <&mdio0>;
+			phy_address = <7>;
+			// status = "disabled";
+		};
+
+		// MAC1 ---SGMII---> QCA8337 SerDes
+		port@1 {
+			port_id = <2>;
+			forced-speed = <1000>;
+			forced-duplex = <1>;
+		};
+	};
+};
+
+// MAC0 -> GE Phy
+&dp1 {
+	/*
+	 * ===============================================================
+	 *     _______________________         _______________________
+	 *    |        IPQ5018        |       |        QCA8337        |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | | MAC0 |---| GE Phy |-+--UTP--+-|  Phy4  |---| MAC5 | |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC0 | |
+	 *    | +------+   +--------+ |       | +--------+   +------+ |
+	 *    |_______________________|       |_______________________|
+	 *
+	 * ===============================================================
+	 *
+	 * Current drivers don't support such topology. So dp1 and ge_phy
+	 * are useless. But they can't be disabled dut to qca-ssdk use
+	 * ge_phy to detect IPQ5018 dummy switch.
+	 */
+	status = "okay";
+};
+
+// MAC1 ---SGMII---> QCA8337 SerDes
+&dp2 {
+	status = "okay";
+	phy-mode = "sgmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+};
+
+// IPQ5018 GE Phy -> QCA8337 Phy1
+&ge_phy {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio1_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	// QCA8337 Phy0 -> IPQ5018 GE Phy
+	qca8337_0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	// QCA8337 Phy1 -> WAN
+	qca8337_1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	// QCA8337 Phy2 -> LAN1
+	qca8337_2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	// QCA8337 Phy3 -> LAN2
+	qca8337_3: ethernet-phy@3 {
+		reg = <3>;
+	};
+
+	// QCA8337 Phy4 -> LAN3
+	qca8337_4: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	// QCA8337 switch
+	switch1: ethernet-switch@10 {
+		compatible = "qca,qca8337";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg = <10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "cpu1";
+				phy-handle = <&qca8337_0>;
+				status = "disabled";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&qca8337_1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&qca8337_2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan2";
+				phy-handle = <&qca8337_3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan3";
+				phy-handle = <&qca8337_4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				phy-mode = "sgmii";
+				ethernet = <&dp2>;
+				qca,sgmii-enable-pll;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+
+	#pwm-cells = <2>;
+
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+};
+
+&qfprom {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	partitions {
+		status = "disabled";
+	};
+
+	nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-engine = <&qpic_nand>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:SBL1";
+				reg = <0x00000000 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "0:MIBIB";
+				reg = <0x00080000 0x20000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "0:QSEE";
+				reg = <0x00100000 0x100000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "0:DEVCFG";
+				reg = <0x00200000 0x40000>;
+				read-only;
+			};
+
+			partition@240000 {
+				label = "0:CDT";
+				reg = <0x00240000 0x40000>;
+				read-only;
+			};
+
+			partition@280000 {
+				label = "0:APPSBLENV";
+				reg = <0x00280000 0x20000>;
+			};
+
+			partition@300000 {
+				label = "0:APPSBL";
+				reg = <0x00300000 0x140000>;
+				read-only;
+			};
+
+			partition@440000 {
+				compatible = "nvmem-cells";
+				label = "0:ART";
+				reg = <0x00440000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "0:TRAINING";
+				reg = <0x00540000 0x80000>;
+				read-only;
+			};
+
+			partition@5c0000 {
+				label = "u_env";
+				reg = <0x005c0000 0x80000>;
+			};
+
+			partition@640000 {
+				label = "s_env";
+				reg = <0x00640000 0x40000>;
+			};
+
+			partition@680000 {
+				label = "devinfo";
+				reg = <0x00680000 0x40000>;
+				read-only;
+			};
+
+			partition@6c0000 {
+				label = "kernel";
+				reg = <0x006c0000 0x5200000>;
+			};
+
+			partition@ec0000 {
+				label = "rootfs";
+				reg = <0x0ec0000 0x4a00000>;
+			};
+
+			partition@58c0000 {
+				label = "alt_kernel";
+				reg = <0x058c0000 0x5200000>;
+			};
+
+			partition@60c0000 {
+				label = "alt_rootfs";
+				reg = <0x060c0000 0x4a00000>;
+			};
+
+			partition@aac0000 {
+				label = "sysdiag";
+				reg = <0x0aac0000 0x200000>;
+				read-only;
+			};
+
+			partition@acc0000 {
+				label = "syscfg";
+				reg = <0x0acc0000 0x4400000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&tlmm {
+	button_pins: button-state {
+		pins = "gpio27", "gpio28";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	mdio1_pins: mdio-state {
+		mdc-pins {
+			pins = "gpio36";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio37";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	pwm_pins: pwm-state {
+		mux_1 {
+			pins = "gpio1";
+			function = "pwm1";
+			drive-strength = <8>;
+		};
+
+		mux_2 {
+			pins = "gpio30";
+			function = "pwm3";
+			drive-strength = <8>;
+		};
+
+		mux_3 {
+			pins = "gpio46";
+			function = "pwm0";
+			drive-strength = <8>;
+		};
+	};
+
+	qpic_pins: qpic-state {
+		clock-pins {
+			pins = "gpio9";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cs-pins {
+			pins = "gpio8";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		data-pins {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	serial_0_pins: uart0-state {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		bias-disable;
+	};
+};
+
+&tsens {
+	status = "okay";
+};
+
+&pcie_x2phy {
+	status = "okay";
+};
+
+&pcie_x2 {
+	status = "okay";
+
+	perst-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>;
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi@1,0 {
+			status = "okay";
+
+			/* QCN9074: ath11k lacks DT compatible for PCI cards */
+			compatible = "pci17cb,1104";
+			reg = <0x00010000 0 0 0 0>;
+
+			qcom,ath11k-calibration-variant = "Linksys-MX5500";
+		};
+	};
+};
+
+&q6v5_wcss {
+	status = "okay";
+
+	memory-region = <&q6_mem_regions>;
+	firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt",
+					"ath11k/IPQ5018/hw1.0/m3_fw.mdt";
+	
+	// IPQ5018
+	q6_wcss_pd1: pd-1 {
+		firmware-name = "ath11k/IPQ5018/hw1.0/q6_fw.mdt";
+
+		resets =
+			<&gcc GCC_WCSSAON_RESET>,
+			<&gcc GCC_WCSS_BCR>,
+			<&gcc GCC_CE_BCR>;
+		reset-names =
+			"wcss_aon_reset",
+			"wcss_reset",
+			"ce_reset";
+
+		clocks =
+			<&gcc GCC_WCSS_AHB_S_CLK>,
+			<&gcc GCC_WCSS_ACMT_CLK>,
+			<&gcc GCC_WCSS_AXI_M_CLK>;
+		clock-names =
+			"gcc_wcss_ahb_s_clk",
+			"gcc_wcss_acmt_clk",
+			"gcc_wcss_axi_m_clk";
+
+		// qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
+		interrupts-extended =
+			<&wcss_smp2p_in 8 0>,
+			<&wcss_smp2p_in 9 0>,
+			<&wcss_smp2p_in 12 0>,
+			<&wcss_smp2p_in 11 0>;
+		interrupt-names =
+			"fatal",
+			"ready",
+			"spawn-ack",
+			"stop-ack";
+
+		qcom,smem-states =
+			<&wcss_smp2p_out 8>,
+			<&wcss_smp2p_out 9>,
+			<&wcss_smp2p_out 10>;
+		qcom,smem-state-names =
+			"shutdown",
+			"stop",
+			"spawn";
+		status = "okay";
+	};
+};
+
+&wifi0 {
+	// IPQ5018
+	qcom,rproc = <&q6_wcss_pd1>;
+	//qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
+	qcom,ath11k-calibration-variant = "Linksys-MX5500";
+	qcom,ath11k-fw-memory-mode = <2>;
+	qcom,bdf-addr = <0x4c400000>;
+
+	status = "okay";
+};

target/linux/qualcommax/image/ipq50xx.mk

@@ -1 +1,36 @@
+define Device/linksys_mx2000
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MX2000
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 83968k
+	DEVICE_DTS_CONFIG := config@mp03.5-c1
+	SOC := ipq5018
+	UBINIZE_OPTS := -E 5	# EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MX2000
+	DEVICE_PACKAGES := ath11k-firmware-qcn6122 \
+					ipq-wifi-linksys_mx2000
+endef
+TARGET_DEVICES += linksys_mx2000
 
+define Device/linksys_mx5500
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MX5500
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 83968k
+	DEVICE_DTS_CONFIG := config@mp03.1
+	SOC := ipq5018
+	UBINIZE_OPTS := -E 5	# EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MX5500
+	DEVICE_PACKAGES := kmod-ath11k-pci \
+					ath11k-firmware-qcn9074 \
+					ipq-wifi-linksys_mx5500
+endef
+TARGET_DEVICES += linksys_mx5500

target/linux/qualcommax/ipq50xx/base-files/etc/board.d/02_network

@@ -0,0 +1,45 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq50xx_setup_interfaces()
+{
+	local board="$1"
+	case $board in
+		linksys,mx2000|\
+		linksys,mx5500)
+			ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+			;;
+	esac
+}
+
+ipq50xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+		linksys,mx2000|\
+		linksys,mx5500)
+			label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+			lan_mac=$label_mac
+			wan_mac=$label_mac
+			ucidef_set_network_device_mac eth1 $label_mac
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ipq50xx_setup_interfaces $board
+ipq50xx_setup_macs $board
+board_config_flush
+
+exit 0

target/linux/qualcommax/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ5018/hw1.0/cal-ahb-c000000.wifi.bin")
+	case "$board" in
+	linksys,mx2000|\
+	linksys,mx5500)
+		caldata_extract "0:ART" 0x1000 0x20000
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath11k_patch_mac $(macaddr_add $label_mac 1) 0
+		ath11k_remove_regdomain
+		ath11k_set_macflag
+		;;
+	esac
+	;;
+"ath11k/qcn6122/hw1.0/cal-ahb-soc@0:wifi1@c000000.bin")
+	case "$board" in
+	linksys,mx2000)
+		caldata_extract "0:ART" 0x26800 0x20000
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath11k_patch_mac $(macaddr_add $label_mac 2) 0
+		ath11k_remove_regdomain
+		ath11k_set_macflag
+		;;
+	esac
+	;;
+"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
+	case "$board" in
+	linksys,mx5500)
+		caldata_extract "0:ART" 0x26800 0x20000
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ath11k_patch_mac $(macaddr_add $label_mac 2) 0
+		ath11k_remove_regdomain
+		ath11k_set_macflag
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

target/linux/qualcommax/ipq50xx/base-files/etc/init.d/bootcount

@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	linksys,mx2000|\
+	linksys,mx5500)
+		mtd resetbc s_env || true
+	;;
+	esac
+}

target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/linksys.sh

@@ -0,0 +1,125 @@
+linksys_get_target_firmware() {
+	local cur_boot_part mtd_ubi0
+
+	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
+	if [ -z "${cur_boot_part}" ]; then
+		mtd_ubi0=$(cat /sys/class/ubi/ubi0/mtd_num)
+		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
+		kernel|rootfs)
+			cur_boot_part=1
+			;;
+		alt_kernel|alt_rootfs)
+			cur_boot_part=2
+			;;
+		esac
+		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+			"${cur_boot_part}" "${mtd_ubi0}"
+	fi
+
+	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
+	#  if test $auto_recovery = no;
+	#      then bootipq;
+	#  elif test $boot_part = 1;
+	#      then run bootpart1;
+	#      else run bootpart2;
+	#  fi
+
+	case "$cur_boot_part" in
+	1)
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			auto_recovery yes
+		EOF
+		printf "alt_kernel"
+		return
+		;;
+	2)
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			auto_recovery yes
+		EOF
+		printf "kernel"
+		return
+		;;
+	*)
+		return
+		;;
+	esac
+}
+
+linksys_is_factory_image() {
+	local board=$(board_name)
+	board=${board##*,}
+
+	# check matching footer signature
+	tail -c 256 $1 | grep -q -i "\.LINKSYS\.........${board}"
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
+	local vol
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ -z "$part_label" ]; then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part "$part_label")
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel" ]; then
+			CI_UBIPART="rootfs"
+		else
+			CI_UBIPART="alt_rootfs"
+		fi
+
+		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
+		if [ ! "$mtdnum" ]; then
+			echo "cannot find ubi mtd partition $CI_UBIPART"
+			return 1
+		fi
+
+		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		if [ ! "$ubidev" ]; then
+			ubiattach -m "$mtdnum"
+			sync
+			ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		fi
+
+		if [ "$ubidev" ]; then
+			for vol in $rm_oem_fw_vols; do
+				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
+			done
+		fi
+
+		# complete std upgrade
+		if nand_upgrade_tar "$1" ; then
+			nand_do_upgrade_success
+		else
+			nand_do_upgrade_failed
+		fi
+
+	}
+
+	[ "$magic_long" = "27051956" ] && {
+		echo "writing \"$1\" image to \"$part_label\""
+		get_image "$1" | mtd write - "$part_label"
+	}
+
+	[ "$magic_long" = "d00dfeed" ] && {
+		if ! linksys_is_factory_image "$1"; then
+			echo "factory image doesn't match device"
+			return 1
+		fi
+
+		echo "writing \"$1\" factory image to \"$part_label\""
+		get_image "$1" | mtd -e "$part_label" write - "$part_label"
+	}
+}

target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,32 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv head'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_check_image() {
+	return 0;
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	linksys,mx2000|\
+	linksys,mx5500)
+		boot_part="$(fw_printenv -n boot_part)"
+		if [ "$boot_part" -eq "1" ]; then
+			fw_setenv boot_part 2
+			CI_KERNPART="alt_kernel"
+			CI_UBIPART="alt_rootfs"
+		else
+			fw_setenv boot_part 1
+			CI_UBIPART="rootfs"
+		fi
+		fw_setenv boot_part_ready 3
+		fw_setenv auto_recovery yes
+		nand_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}