mirror of
https://github.com/LiBwrt-op/ipq50xx.git
synced 2025-12-16 06:59:52 +00:00
ipq50xx: add redmi ax3000
This commit is contained in:
breeze303
parent
34922242db
commit
447f9fe6ee
@ -8,6 +8,8 @@ touch /etc/config/ubootenv
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
|
||||
redmi,ax3000|\
|
||||
linksys,mx2000|\
|
||||
linksys,mx5500)
|
||||
idx="$(find_mtd_index u_env)"
|
||||
|
||||
@ -38,10 +38,10 @@ ALLWIFIBOARDS:= \
|
||||
edgecore_eap102 \
|
||||
edimax_cax1800 \
|
||||
gl-b3000 \
|
||||
linksys_mx2000 \
|
||||
linksys_mx2000 \
|
||||
linksys_mx4200 \
|
||||
linksys_mx5300 \
|
||||
linksys_mx5500 \
|
||||
linksys_mx5500 \
|
||||
linksys_mx8500 \
|
||||
linksys_whw03 \
|
||||
netgear_lbr20 \
|
||||
@ -52,6 +52,7 @@ ALLWIFIBOARDS:= \
|
||||
netgear_wax620 \
|
||||
netgear_wax630 \
|
||||
prpl_haze \
|
||||
redmi_ax3000 \
|
||||
qnap_301w \
|
||||
redmi_ax6 \
|
||||
skspruce_wia3300-20 \
|
||||
@ -186,6 +187,7 @@ $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
|
||||
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
|
||||
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
|
||||
$(eval $(call generate-ipq-wifi-package,redmi_ax3000,Redmi AX3000))
|
||||
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
|
||||
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
|
||||
$(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
|
||||
|
||||
BIN
package/firmware/ipq-wifi/src/board-redmi_ax3000.ipq5018
Normal file
BIN
package/firmware/ipq-wifi/src/board-redmi_ax3000.ipq5018
Normal file
Binary file not shown.
BIN
package/firmware/ipq-wifi/src/board-redmi_ax3000.qcn6122
Normal file
BIN
package/firmware/ipq-wifi/src/board-redmi_ax3000.qcn6122
Normal file
Binary file not shown.
@ -38,9 +38,17 @@ EXTRA_CFLAGS+= \
|
||||
-I$(STAGING_DIR)/usr/include/qca-ssdk
|
||||
|
||||
NSS_DP_HAL_DIR:=$(PKG_BUILD_DIR)/hal
|
||||
|
||||
define Build/Configure
|
||||
$(CP) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_SUBTARGET)/nss_$(CONFIG_TARGET_SUBTARGET).h \
|
||||
$(PKG_BUILD_DIR)/exports/nss_dp_arch.h
|
||||
ifeq ($(CONFIG_TARGET_SUBTARGET),ipq50xx_32)
|
||||
COPY_FILE=$(NSS_DP_HAL_DIR)/soc_ops/ipq50xx/nss_ipq50xx.h
|
||||
else
|
||||
COPY_FILE=$(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_SUBTARGET)/nss_$(CONFIG_TARGET_SUBTARGET).h
|
||||
endif
|
||||
|
||||
$(CP) $$COPY_FILE $(PKG_BUILD_DIR)/exports/nss_dp_arch.h
|
||||
endef
|
||||
|
||||
endef
|
||||
|
||||
define Build/Compile
|
||||
|
||||
@ -0,0 +1,503 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq5018.dtsi"
|
||||
#include "ipq5018-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Redmi AX3000";
|
||||
compatible = "redmi,ax3000", "qcom,ipq5018";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart1;
|
||||
|
||||
ethernet0 = &dp1;
|
||||
ethernet1 = &dp2;
|
||||
|
||||
led-boot = &led_system_blue;
|
||||
led-failsafe = &led_system_yellow;
|
||||
led-running = &led_system_blue;
|
||||
led-upgrade = &led_system_yellow;
|
||||
};
|
||||
|
||||
chosen {
|
||||
// Override the root parameter from u-boot
|
||||
// Increase coherent_pool size for WiFi
|
||||
bootargs-append = " root=/dev/ubiblock0_1 coherent_pool=2M";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
// Not sure why but without this, WiFi will crash
|
||||
tz_apps@4a400000 {
|
||||
no-map;
|
||||
// The size is incorrent, but it works
|
||||
reg = <0x0 0x4a400000 0x0 0x700000>;
|
||||
};
|
||||
|
||||
q6_mem_regions: q6_mem_regions@4b000000 {
|
||||
no-map;
|
||||
// reg = <0x0 0x4b000000 0x0 0x3b00000>;
|
||||
reg = <0x0 0x4b000000 0x0 0x3000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
blsp_uart0_pins: blsp_uart0_pins {
|
||||
pins =
|
||||
"gpio28", /* RX */
|
||||
"gpio29"; /* TX */
|
||||
function = "blsp0_uart1";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
qspi_nand_pins: qspi_nand_pins {
|
||||
clock {
|
||||
pins = "gpio9";
|
||||
function = "qspi_clk";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cs {
|
||||
pins = "gpio8";
|
||||
function = "qspi_cs";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
||||
function = "qspi_data";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
mdio1_pins: mdio1_pins {
|
||||
mdc {
|
||||
pins = "gpio36";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio37";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
leds_pins: leds_pins {
|
||||
led_system_blue {
|
||||
pins = "gpio19";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
led_system_yellow {
|
||||
pins = "gpio17";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
led_internet_blue {
|
||||
pins = "gpio22";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
led_internet_yellow {
|
||||
pins = "gpio20";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
button_reset {
|
||||
pins = "gpio25";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
button_mesh {
|
||||
pins = "gpio23";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart1 {
|
||||
pinctrl-0 = <&blsp_uart0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
pinctrl-0 = <&qspi_nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&soc {
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_system_blue: led_system_blue {
|
||||
label = "blue:system";
|
||||
gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_system_yellow: led_system_yellow {
|
||||
label = "yellow:system";
|
||||
gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_internet_blue: led_internet_blue {
|
||||
label = "blue:internet";
|
||||
gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led_internet_yellow: led_internet_yellow {
|
||||
label = "yellow:internet";
|
||||
gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
button {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
button_reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
button_mesh {
|
||||
label = "mesh";
|
||||
gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
// mdio-bus = <&mdio0>;
|
||||
|
||||
// switch_cpu_bmp = <ESS_PORT0>;
|
||||
// switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2)>;
|
||||
switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
|
||||
|
||||
qcom,port_phyinfo {
|
||||
// MAC0 -> GE Phy -> QCA8337 Phy4
|
||||
port@0 {
|
||||
port_id = <1>;
|
||||
mdiobus = <&mdio0>;
|
||||
phy_address = <7>;
|
||||
phy_dac = <0x10 0x10>;
|
||||
// status = "disabled";
|
||||
};
|
||||
|
||||
// MAC1 ---SGMII---> QCA8337 SerDes
|
||||
port@1 {
|
||||
port_id = <2>;
|
||||
forced-speed = <1000>;
|
||||
forced-duplex = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
// MAC0 -> GE Phy
|
||||
&dp1 {
|
||||
/*
|
||||
* ===============================================================
|
||||
* _______________________ _______________________
|
||||
* | IPQ5018 | | QCA8337 |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | | MAC0 |---| GE Phy |-+--UTP--+-| Phy4 |---| MAC5 | |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* | | MAC1 |---| Uniphy |-+-SGMII-+-| SerDes |---| MAC0 | |
|
||||
* | +------+ +--------+ | | +--------+ +------+ |
|
||||
* |_______________________| |_______________________|
|
||||
*
|
||||
* ===============================================================
|
||||
*
|
||||
* Current drivers don't support such topology. So dp1 and ge_phy
|
||||
* are useless. But they can't be disabled dut to qca-ssdk use
|
||||
* ge_phy to detect IPQ5018 dummy switch.
|
||||
*/
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// MAC1 ---SGMII---> QCA8337 SerDes
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
phy-mode = "sgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// IPQ5018 GE Phy -> QCA8337 Phy4
|
||||
&ge_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
pinctrl-0 = <&mdio1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
reset-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
|
||||
|
||||
// QCA8337 Phy0 -> LAN1
|
||||
qca8337_0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy1 -> LAN2
|
||||
qca8337_1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy2 -> LAN3
|
||||
qca8337_2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy3 -> WAN
|
||||
qca8337_3: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
// QCA8337 Phy4 -> IPQ5018 GE Phy
|
||||
qca8337_4: ethernet-phy@4 {
|
||||
reg = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
switch0: ethernet-switch@17 {
|
||||
compatible = "qca,qca8337";
|
||||
reg = <17>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch0cpu: port@0 {
|
||||
reg = <0>;
|
||||
label = "cpu";
|
||||
phy-mode = "sgmii";
|
||||
ethernet = <&dp2>;
|
||||
qca,sgmii-enable-pll;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
phy-handle = <&qca8337_0>;
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
phy-handle = <&qca8337_1>;
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
phy-handle = <&qca8337_2>;
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
phy-handle = <&qca8337_3>;
|
||||
};
|
||||
|
||||
port@5 {
|
||||
reg = <5>;
|
||||
label = "cpu2";
|
||||
phy-handle = <&qca8337_4>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&q6v5_wcss {
|
||||
memory-region = <&q6_mem_regions>;
|
||||
|
||||
firmware-name = "IPQ5018/q6_fw.mdt",
|
||||
"IPQ5018/m3_fw.mdt",
|
||||
"qcn6122/m3_fw.mdt";
|
||||
|
||||
qcom,bootargs_smem = <507>;
|
||||
boot-args = </* type: */ 0x2 /* PCIE1 */
|
||||
/* length: */ 4
|
||||
/* PD id: */ 2
|
||||
/* reset GPIO: */ 27
|
||||
/* reserved: */ 0 0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
// IPQ5018
|
||||
q6_wcss_pd1: pd-1 {
|
||||
resets =
|
||||
<&gcc GCC_WCSSAON_RESET>,
|
||||
<&gcc GCC_WCSS_BCR>,
|
||||
<&gcc GCC_CE_BCR>;
|
||||
reset-names =
|
||||
"wcss_aon_reset",
|
||||
"wcss_reset",
|
||||
"ce_reset";
|
||||
|
||||
clocks =
|
||||
<&gcc GCC_WCSS_AHB_S_CLK>,
|
||||
<&gcc GCC_WCSS_ACMT_CLK>,
|
||||
<&gcc GCC_WCSS_AXI_M_CLK>;
|
||||
clock-names =
|
||||
"gcc_wcss_ahb_s_clk",
|
||||
"gcc_wcss_acmt_clk",
|
||||
"gcc_wcss_axi_m_clk";
|
||||
|
||||
reg = <0x4ab000 0x20>;
|
||||
reg-names = "rmb";
|
||||
|
||||
// qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>;
|
||||
|
||||
interrupts-extended =
|
||||
<&wcss_smp2p_in 8 0>,
|
||||
<&wcss_smp2p_in 9 0>,
|
||||
<&wcss_smp2p_in 12 0>,
|
||||
<&wcss_smp2p_in 11 0>;
|
||||
interrupt-names =
|
||||
"fatal",
|
||||
"ready",
|
||||
"spawn-ack",
|
||||
"stop-ack";
|
||||
|
||||
qcom,smem-states =
|
||||
<&wcss_smp2p_out 8>,
|
||||
<&wcss_smp2p_out 9>,
|
||||
<&wcss_smp2p_out 10>;
|
||||
qcom,smem-state-names =
|
||||
"shutdown",
|
||||
"stop",
|
||||
"spawn";
|
||||
|
||||
firmware-name = "IPQ5018/q6_fw.mdt";
|
||||
// m3_firmware = "IPQ5018/m3_fw.mdt";
|
||||
};
|
||||
|
||||
// QCN6102
|
||||
q6_wcss_pd2: pd-2 {
|
||||
interrupts-extended =
|
||||
<&wcss_smp2p_in 16 0>,
|
||||
<&wcss_smp2p_in 17 0>,
|
||||
<&wcss_smp2p_in 20 0>,
|
||||
<&wcss_smp2p_in 19 0>;
|
||||
interrupt-names =
|
||||
"fatal",
|
||||
"ready",
|
||||
"spawn-ack",
|
||||
"stop-ack";
|
||||
|
||||
qcom,smem-states =
|
||||
<&wcss_smp2p_out 16>,
|
||||
<&wcss_smp2p_out 17>,
|
||||
<&wcss_smp2p_out 18>;
|
||||
qcom,smem-state-names =
|
||||
"shutdown",
|
||||
"stop",
|
||||
"spawn";
|
||||
|
||||
firmware-name = "IPQ5018/q6_fw.mdt";
|
||||
// m3_firmware = "qcn6122/m3_fw.mdt";
|
||||
};
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
// IPQ5000
|
||||
qcom,multipd_arch;
|
||||
qcom,rproc = <&q6_wcss_pd1>;
|
||||
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
|
||||
|
||||
// Be overridden by /etc/hotplug.d/firmware/10-ath11k-board_id
|
||||
// M79: 0x10
|
||||
// M81: 0x24
|
||||
qcom,board_id = <0x24>;
|
||||
|
||||
// qcom,ath11k-fw-memory-mode = <0>;
|
||||
// qcom,bdf-addr = <0x4c400000>;
|
||||
// qcom,caldb-addr = <0x4d200000>;
|
||||
// qcom,m3-dump-addr = <0x4d400000>;
|
||||
|
||||
qcom,ath11k-fw-memory-mode = <2>;
|
||||
qcom,bdf-addr = <0x4c400000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
// QCN6102
|
||||
qcom,multipd_arch;
|
||||
qcom,rproc = <&q6_wcss_pd2>;
|
||||
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
|
||||
|
||||
qcom,board_id = <0x60>;
|
||||
|
||||
// qcom,ath11k-fw-memory-mode = <0>;
|
||||
// qcom,bdf-addr = <0x4d500000>;
|
||||
// qcom,caldb-addr = <0x4e500000>;
|
||||
// qcom,m3-dump-addr = <0x4ea00000>;
|
||||
|
||||
qcom,ath11k-fw-memory-mode = <2>;
|
||||
qcom,bdf-addr = <0x4d100000>;
|
||||
qcom,m3-dump-addr = <0x4df00000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,2 +1,2 @@
|
||||
#include <../../../arm64/boot/dts/qcom/ipq5018.dtsi>
|
||||
#include <qcom-ipq5018.dtsi>
|
||||
#include "../../../arm64/boot/dts/qcom/ipq5018.dtsi"
|
||||
#include "qcom-ipq5018.dtsi"
|
||||
|
||||
@ -1,14 +1,16 @@
|
||||
KERNEL_LOADADDR := 0x41208000
|
||||
|
||||
define Device/glinet_gl-b3000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
SOC := ipq5000
|
||||
DEVICE_VENDOR := GL.iNET
|
||||
DEVICE_MODEL := GL-B3000
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@mp03.5-c1
|
||||
UBINIZE_OPTS := -E 5
|
||||
DEVICE_PACKAGES := ath11k-firmware-qcn6122 ipq-wifi-gl-b3000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
SOC := ipq5000
|
||||
DEVICE_VENDOR := GL.iNET
|
||||
DEVICE_MODEL := GL-B3000
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@mp03.5-c1
|
||||
UBINIZE_OPTS := -E 5
|
||||
DEVICE_PACKAGES := ath11k-firmware-qcn6122 ipq-wifi-gl-b3000
|
||||
endef
|
||||
TARGET_DEVICES += glinet_gl-b3000
|
||||
|
||||
@ -47,4 +49,25 @@ define Device/linksys_mx5500
|
||||
ath11k-firmware-qcn9074 \
|
||||
ipq-wifi-linksys_mx5500
|
||||
endef
|
||||
TARGET_DEVICES += linksys_mx5500
|
||||
TARGET_DEVICES += linksys_mx5500
|
||||
|
||||
define Device/redmi_ax3000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
SOC := ipq5000
|
||||
DEVICE_VENDOR := Redmi
|
||||
DEVICE_MODEL := AX3000
|
||||
DEVICE_ALT0_VENDOR := Xiaomi
|
||||
DEVICE_ALT0_MODEL := CR880x
|
||||
DEVICE_ALT0_VARIANT := (M81 version)
|
||||
DEVICE_ALT1_VENDOR := Xiaomi
|
||||
DEVICE_ALT1_MODEL := CR880x
|
||||
DEVICE_ALT1_VARIANT := (M79 version)
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@mp02.1
|
||||
DEVICE_PACKAGES := ath11k-firmware-ipq5018 \
|
||||
ath11k-firmware-qcn6122 \
|
||||
ipq-wifi-redmi_ax3000
|
||||
endef
|
||||
TARGET_DEVICES += redmi_ax3000
|
||||
|
||||
@ -0,0 +1,19 @@
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case $board in
|
||||
redmi,ax3000)
|
||||
ucidef_set_led_switch "wan" "WAN" "blue:internet" "switch1" "$( bits 4 )"
|
||||
;;
|
||||
*)
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@ -7,6 +7,9 @@ ipq50xx_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
case $board in
|
||||
redmi,ax3000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
glinet,gl-b3000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
|
||||
;;
|
||||
|
||||
@ -17,6 +17,7 @@ case "$FIRMWARE" in
|
||||
ath11k_remove_regdomain
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
redmi,ax3000|\
|
||||
glinet,gl-b3000)
|
||||
caldata_extract "0:ART" 0x1000 0x20000
|
||||
;;
|
||||
@ -31,6 +32,7 @@ case "$FIRMWARE" in
|
||||
ath11k_remove_regdomain
|
||||
ath11k_set_macflag
|
||||
;;
|
||||
redmi,ax3000|\
|
||||
glinet,gl-b3000)
|
||||
caldata_extract "0:ART" 0x26800 0x20000
|
||||
;;
|
||||
|
||||
@ -10,6 +10,7 @@ platform_check_image() {
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
redmi,ax3000|\
|
||||
glinet,gl-b3000)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
|
||||
@ -3,6 +3,7 @@ CONFIG_ALIGNMENT_TRAP=y
|
||||
# CONFIG_APQ_MMCC_8084 is not set
|
||||
CONFIG_ARCH_32BIT_OFF_T=y
|
||||
# CONFIG_ARCH_IPQ40XX is not set
|
||||
CONFIG_ARCH_IPQ50XX=y
|
||||
# CONFIG_ARCH_MDM9615 is not set
|
||||
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=8
|
||||
|
||||
Loading…
Reference in New Issue
Block a user