mirror of
https://github.com/Heleguo/lede.git
synced 2025-12-16 19:01:32 +00:00
rockchip: add Xunlong Orange Pi 5 Max and Ultra support
This commit is contained in:
coolsnowwolf
parent
24e773f8ce
commit
c1916a3c2b
@ -375,7 +375,9 @@ define U-Boot/orangepi-5-plus-rk3588
|
||||
$(U-Boot/rk3588/Default)
|
||||
NAME:=OrangePi 5 Plus
|
||||
BUILD_DEVICES:= \
|
||||
xunlong_orangepi-5-plus
|
||||
xunlong_orangepi-5-max \
|
||||
xunlong_orangepi-5-plus \
|
||||
xunlong_orangepi-5-ultra
|
||||
endef
|
||||
|
||||
define U-Boot/rock5b-rk3588
|
||||
|
||||
@ -0,0 +1,178 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3588-orangepi-5.dtsi"
|
||||
|
||||
/ {
|
||||
vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
/* USB_OTG_PWREN */
|
||||
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_otg_pwren>;
|
||||
regulator-name = "vcc5v0_usb30_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&headphone_amp {
|
||||
/* PHONE_CTL */
|
||||
enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&analog_sound {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hp_detect>;
|
||||
simple-audio-card,aux-devs = <&headphone_amp>;
|
||||
simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
simple-audio-card,routing =
|
||||
"Headphones", "LOUT1",
|
||||
"Headphones", "ROUT1",
|
||||
"LINPUT1", "Microphone Jack",
|
||||
"RINPUT1", "Microphone Jack",
|
||||
"LINPUT2", "Onboard Microphone",
|
||||
"RINPUT2", "Onboard Microphone";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Microphone", "Onboard Microphone",
|
||||
"Headphone", "Headphones";
|
||||
};
|
||||
|
||||
&fan {
|
||||
/* FAN_CTL_H */
|
||||
pwms = <&pwm9 0 50000 0>;
|
||||
};
|
||||
|
||||
&hym8563 {
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_int_l>;
|
||||
};
|
||||
|
||||
&led_blue_pwm {
|
||||
/* PWM_LED1 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* phy2 */
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
rtc_int_l: hym8563-int {
|
||||
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
hp_detect: hp-detect {
|
||||
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_pwren: usb-host-pwren {
|
||||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
bt_reg_on: bt-reg-on {
|
||||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
host_wake_bt: host-wake-bt {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm4m0_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm5m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm9 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm9m2_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspim2_pins>;
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb30_otg>;
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-names = "host-wakeup";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
|
||||
shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
vbat-supply = <&vcc_3v3_s3>;
|
||||
vddio-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
/* pcie eth. not a real regulator. 33VAUX */
|
||||
&vcc3v3_pcie_eth {
|
||||
/* Ethernet_power_en */
|
||||
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic,
|
||||
* both regulators share the same enable gpio
|
||||
*/
|
||||
&vcc5v0_usb20 {
|
||||
/* USB_HOST_PWREN */
|
||||
gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
};
|
||||
@ -0,0 +1,31 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588-orangepi-5-compact.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 5 Max";
|
||||
compatible = "xunlong,orangepi-5-max", "rockchip,rk3588";
|
||||
|
||||
};
|
||||
|
||||
&led_blue_pwm {
|
||||
pwms = <&pwm4 0 25000 0>;
|
||||
};
|
||||
|
||||
&led_green_pwm {
|
||||
pwms = <&pwm5 0 25000 0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
|
||||
usb {
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,34 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588-orangepi-5-compact.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 5 Ultra";
|
||||
compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588";
|
||||
};
|
||||
|
||||
&led_blue_pwm {
|
||||
pwms = <&pwm4 0 25000 PWM_POLARITY_INVERTED>;
|
||||
};
|
||||
|
||||
&led_green_pwm {
|
||||
pwms = <&pwm5 0 25000 PWM_POLARITY_INVERTED>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb {
|
||||
usb_otg_pwren: usb-otg-pwren {
|
||||
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&vcc5v0_usb30_otg {
|
||||
gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
@ -0,0 +1,805 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "Mask Rom";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
recovery_button: adc-keys-1 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
status = "disabled";
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <2000>;
|
||||
};
|
||||
};
|
||||
|
||||
speaker_amp: speaker-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
headphone_amp: headphones-audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
sound-name-prefix = "Headphones Amp";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_blue_gpio: led {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 70 75 80 100>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
led_blue_pwm: led-1 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
linux,default-trigger = "heartbeat";
|
||||
max-brightness = <255>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
led_green_pwm: led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
function-enumerator = <2>;
|
||||
max-brightness = <255>;
|
||||
};
|
||||
};
|
||||
|
||||
rfkill {
|
||||
compatible = "rfkill-gpio";
|
||||
label = "rfkill-pcie-wlan";
|
||||
radio-type = "wlan";
|
||||
shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
analog_sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "Analog";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,bitclock-master = <&daicpu>;
|
||||
simple-audio-card,frame-master = <&daicpu>;
|
||||
/*TODO: SARADC_IN3 is used as MIC detection / key input */
|
||||
|
||||
daicpu: simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0_8ch>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
|
||||
daicodec: simple-audio-card,codec {
|
||||
sound-dai = <&es8388>;
|
||||
system-clock-frequency = <12288000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie_eth";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
};
|
||||
|
||||
vcc3v3_wf: regulator-vcc3v3-wf {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc3v3_wf";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <50000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20: regulator-vcc5v0-usb20 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
regulator-name = "vcc5v0_usb20";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388", "everest,es8328";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
AVDD-supply = <&vcc_3v3_s0>;
|
||||
DVDD-supply = <&vcc_1v8_s0>;
|
||||
HPVDD-supply = <&vcc_3v3_s0>;
|
||||
PVDD-supply = <&vcc_1v8_s0>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2_2ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s2m0_lrck
|
||||
&i2s2m0_sclk
|
||||
&i2s2m0_sdi
|
||||
&i2s2m0_sdo>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&package_fan0>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map1 {
|
||||
trip = <&package_fan1>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
|
||||
trips {
|
||||
package_fan0: package-fan0 {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
package_fan1: package-fan1 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
status = "okay";
|
||||
|
||||
spi_flash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <100000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vdd2_ddr_s3>;
|
||||
vcc14-supply = <&vdd2_ddr_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
/* shorted to avcc_1v8_s0 on the board */
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
/*
|
||||
* The schematic mentions that actual setting
|
||||
* should be 0.8375V. RK3588 datasheet specifies
|
||||
* maximum as 0.825V. So we set datasheet max
|
||||
* here.
|
||||
*/
|
||||
regulator-min-microvolt = <825000>;
|
||||
regulator-max-microvolt = <825000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host {
|
||||
phy-supply = <&vcc5v0_usb20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
@ -632,6 +632,26 @@ define Device/xunlong_orangepi-5-plus
|
||||
endef
|
||||
TARGET_DEVICES += xunlong_orangepi-5-plus
|
||||
|
||||
define Device/xunlong_orangepi-5-max
|
||||
DEVICE_VENDOR := Xunlong
|
||||
DEVICE_MODEL := Orange Pi 5 Max
|
||||
SOC := rk3588
|
||||
UBOOT_DEVICE_NAME := orangepi-5-plus-rk3588
|
||||
IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
|
||||
DEVICE_PACKAGES := kmod-r8125-rss
|
||||
endef
|
||||
TARGET_DEVICES += xunlong_orangepi-5-max
|
||||
|
||||
define Device/xunlong_orangepi-5-ultra
|
||||
DEVICE_VENDOR := Xunlong
|
||||
DEVICE_MODEL := Orange Pi 5 Ultra
|
||||
SOC := rk3588
|
||||
UBOOT_DEVICE_NAME := orangepi-5-plus-rk3588
|
||||
IMAGE/sysupgrade.img.gz := boot-common | boot-script | pine64-img | gzip | append-metadata
|
||||
DEVICE_PACKAGES := kmod-r8125-rss
|
||||
endef
|
||||
TARGET_DEVICES += xunlong_orangepi-5-ultra
|
||||
|
||||
define Device/xunlong_orangepi-r1-plus
|
||||
DEVICE_VENDOR := Xunlong
|
||||
DEVICE_MODEL := Orange Pi R1 Plus
|
||||
|
||||
Loading…
Reference in New Issue
Block a user