ksmbd is an upstream linux alternative to Samba which is lighterweight
and more performant, especially on underpowered devices.
Moving it here from the packages feed as it is now an upstream kernel
module. Also easier to update as version updates can be coordinated better
The next LTS kernel (5.15) has this included. A depend on kernel < 5.15
will need to be added later.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Linux upstream commit 9370f2d05a
add load firmware file through request_firmware,this affect the
nanopi r2s and some USB adapters in kernel 5.10 with this error:
'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw'
This patch split the USB NIC firmware files from r8169 firmware,
and adds r8152-firmware to r8152 driver.
Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet
adapters supported since v5.13-rc1.
195aae321c
Signed-off-by: Marty Jones <mj8263788@gmail.com>
The GPIO_DEVICE symbol belonged to a custom driver that was removed from
OpenWrt in 2012. The symbol never existed in the upstream kernel.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: fix HT40 mode for 6G band
The channel offset used for VHT segment calculation was missing for HT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add missing change for encap offload on devices with sw rate control
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: owl-loader: remove obsolete AR71XX patch
this is no longer necessary as the AR71XX target
was superseded by ath79.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: revert faulty change that was breaking broadcast tx
Fixes: 0f6887972adc ("mac80211: add missing change for encap offload on devices with sw rate control")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to backports-5.10.68
Refresh all patches.
The removed patches were integrated upstream.
This contains fixes for CVE-2020-3702
1. These patches (ath, ath9k, mac80211) were included in kernel
versions since 4.14.245 and 4.19.205. They fix security vulnerability
CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2].
Thank you Josef Schlehofer for reporting this problem.
[1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702
[2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: backport support for BSS color changes
This is needed for an upcoming mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Christian Lamparter <chunkeey@gmail.com>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix HT40 mode for 6G band
The channel offset used for VHT segment calculation was missing for HT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add missing change for encap offload on devices with sw rate control
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
* mac80211: merge the virtual time based airtime scheduler
Improves airtime fairness, especially for devices with larger firmware buffers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: merge a 4-addr client mode fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport SAR power limit support
Needed for an upcoming mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version
624c681ef0c6 mt76: mt7921: enable VHT BFee capability
a27dfcb63ccf mt76: connac: fix UC entry is being overwritten
6b691e62470e mt76: connac: add mt76_connac_power_save_sched in mt76_connac_pm_unref
b14365bea586 mt76: mt7921: wake the device before dumping power table
82af16bddfc0 mt76: mt7921: make mt7921_set_channel static
b24598b1c1a9 mt76: connac: add mt76_connac_mcu_get_nic_capability utility routine
5954e3381ff9 mt76: testmode: move chip-specific stats dump before common stats
fd5b612f9aa4 mt76: mt7915: fix rx fcs error count in testmode
d9d26a294f7b mt76: connac: fix the maximum interval schedule scan can support
ed39c882f388 mt76: reduce rx buffer size to 2048
60f3d3adbba6 mt76: move mt76_get_next_pkt_id in mt76.h
67ed4d902c84 mt76: connac: check band caps in mt76_connac_mcu_set_rate_txpower
23c6ec49c000 mt76: make mt76_update_survey() per phy
5ca602fb9455 mt76: mt7915: introduce mt7915_mcu_set_txbf()
c13df42282e9 mt76: mt7915: improve MU stability
dee7dcddcaa0 mt76: use SPDX header file comment style
6fbd47153b3d mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode
1b97dd1762ca mt76: mt7921: fix sta_state incorrect implementation
1b89053b5a6f mt76: mt7921: improve code readability for mt7921_update_txs
126649816785 mt76: mt7921: limit txpower according to userlevel power
a5163ac09be2 mt76: mt7921: introduce dedicated control for deep_sleep
e47c04db4d7e mt76: mt7921: fix kernel warning when reset on vif is not sta
063d3611662c mt76: mt7921: fix the coredump is being truncated
12bf28feba7c mt76: fix iv and CCMP header insertion
949327e76ee4 mt76: disable TWT capabilities for the moment
3530254c1bc9 mt76: mt7921: enable HE BFee capability
599e35f5d9b8 mt76: sdio: do not run mt76_txq_schedule directly
3b6d30c28946 mt76: mt7663s: rely on pm reference counting
529d55a79088 mt76: mt7663s: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path
ef44ff116ee2 mt76: mt7663s: enable runtime-pm
3a71e71a555e mt76: mt7615: set macwork timeout according to runtime-pm
925d96e443a4 mt76: mt7921: allow chip reset during device restart
63b114d84361 mt76: mt76x0e: fix device hang during suspend/resume
7f5ea5e2fd10 mt7915: check return code of sysfs_create_link
ca64a36908b7 mt76: fix mt76_rates for the multiple devices
f517116bf14c mt76: add mt76_default_basic_rate more devices can rely on
6c70b0100513 mt76: mt7921: fix mgmt frame using unexpected bitrate
c00a9a6b52af mt76: mt7915: fix mgmt frame using unexpected bitrate
0e4089949565 mt76: mt7921: fix endianness in mt7921_mcu_tx_done_event
55f314120ef2 mt76: mt7921: avoid unnecessary spin_lock/spin_unlock in mt7921_mcu_tx_done_event
541cd3276488 mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skb
817761e87c4f mt76: mt7921: fix endianness warning in mt7921_update_txs
b8eca74bbd7b mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi
5e5e07f0def3 mt76: mt7915: fix potential overflow of eeprom page index
abda4cded420 mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal()
535899f81a46 mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameter
adfa1b9a3ca0 mt76: connac: fix mt76_connac_gtk_rekey_tlv usage
2a65b105ea4a mt76: mt7921: enable aspm by default
c57158c82804 mt76: fix build error implicit enumeration conversion
41f607cab83c mt76: mt7921: fix survey-dump reporting
25b4f885a937 mt76: mt76x02: fix endianness warnings in mt76x02_mac.c
e63fadb87fe1 mt76: mt7915: report HE MU radiotap
135ef3e9827a mt76: mt7915: adapt new firmware to update BA winsize for Rx session
7118eacb7ce4 mt76: mt7921: add .set_sar_specs support
f1f6569da408 mt76: mt7915: fix an off-by-one bound check
f7da39467965 mt76 mt7915: take RCU read lock when calling ieee80211_bss_get_elem()
87af8e5c72b1 mt76: mt7915: cleanup -Wunused-but-set-variable
8e2d383fbd92 mt76: mt7915: report tx rate directly from tx status
ddce30977591 mt76: mt7915: remove mt7915_sta_stats
4ccd42029519 mt76: mt7921: introduce testmode support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
drv_mac80211_teardown fails silently if the device to be torn down is
not defined. This commit prints an error message.
branches affected: trunk, 21.02
Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
When wifi is turned off, drv_mac80211_teardown sometimes fails (silently)
because the device to be torn down is not defined.
This situation arises if drv_mac80211_setup was called twice when
wifi was turned on.
This commit ensures that the device to be torn down is always defined
in drv_mac80211_teardown.
Steps to reproduce:
1) Use /sbin/wifi to turn on wifi.
uci set wireless.@wifi-iface[0].disabled=0
uci set wireless.@wifi-device[0].disabled=0
uci commit
wifi
2) Use /sbin/wifi to turn off wifi.
uci set wireless.@wifi-device[0].disabled=1
uci commit
wifi
3) Observe that wifi is still up.
branches affected: trunk, 21.02
Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
If drv_mac80211_setup is called twice with the same wifi configuration,
then the second call returns early with error HOSTAPD_START_FAILED.
(wifi works nevertheless, despite the fact that setup is incomplete. But
"ubus call network.wireless status" erroneously reports that radio0 is down.)
The relevant part of drv_mac80211_setup is,
if [ "$no_reload" != "0" ]; then
add_ap=1
ubus wait_for hostapd
local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
ret="$?"
[ "$ret" != 0 -o -z "$hostapd_res" ] && {
wireless_setup_failed HOSTAPD_START_FAILED
return
}
wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1
fi
This commit sets no_reload = 0 during the second call of drv_mac80211_setup.
It is perhaps worth providing a way to reproduce the situation
where drv_mac80211_setup is called twice.
When /sbin/wifi is used to turn on wifi,
uci set wireless.@wifi-iface[0].disabled=0
uci set wireless.@wifi-device[0].disabled=0
uci commit
wifi
/sbin/wifi makes the following ubus calls,
ubus call network reload
ubus call network.wireless down
ubus call network.wireless up
The first and third ubus calls both call drv_mac80211_setup,
while the second ubus call triggers wireless_device_setup_cancel.
So the call sequence becomes,
drv_mac80211_setup
wireless_device_setup_cancel
drv_mac80211_setup
In contrast, when LuCI is used to turn on wifi only a single call
is made to drv_mac80211_setup.
branches affected: trunk, 21.02
Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
* mac80211: allow VHT on 2.4GHz
Allow VHT rate on 2.4GHz in order to use 256-QAM
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath10k: allow VHT on 2.4GHz
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* hostapd: add vendor_vht option
hostapd has vendor_vht option to enable VHT (256-QAM) on 2.4GHz
Add this option to hostapd.sh so users can enable it via uci
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* mac80211: ath.mk: typo fixes
Co-authored-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* mac80211: remove patches stripping down crypto support
Use of WPA3 and things like FILS is getting much more common, and platforms
that can't affort the extra kilobytes for this code are fading away.
Let's not hold back modern authentication methods any longer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: make cryptoapi support needed by mac80211 built-in
This reduces the flash space impact, since built-in code is much smaller
than a bunch of kernel modules on squashfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove extra patch accidentally added during rebase
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ATH_REG_DYNAMIC_USER_REG_HINTS is currently not being set as mac80211
tries to set it as m which is not possible as its boolean only.
Since its used alongside user regulatory, move it to USER_REGD.
This is required for ath11k to accept regulatory changes, otherwise
it wont accept any changes and will simply force US.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Co-authored-by: Robert Marko <robimarko@gmail.com>
From the patch series description:
Several security issues in the 802.11 implementations were found by
Mathy Vanhoef (New York University Abu Dhabi), who has published all
the details at
https://papers.mathyvanhoef.com/usenix2021.pdf
Specifically, the following CVEs were assigned:
* CVE-2020-24586 - Fragmentation cache not cleared on reconnection
* CVE-2020-24587 - Reassembling fragments encrypted under different
keys
* CVE-2020-24588 - Accepting non-SPP A-MSDU frames, which leads to
payload being parsed as an L2 frame under an
A-MSDU bit toggling attack
* CVE-2020-26139 - Forwarding EAPOL from unauthenticated sender
* CVE-2020-26140 - Accepting plaintext data frames in protected
networks
* CVE-2020-26141 - Not verifying TKIP MIC of fragmented frames
* CVE-2020-26142 - Processing fragmented frames as full frames
* CVE-2020-26143 - Accepting fragmented plaintext frames in
protected networks
* CVE-2020-26144 - Always accepting unencrypted A-MSDU frames that
start with RFC1042 header with EAPOL ethertype
* CVE-2020-26145 - Accepting plaintext broadcast fragments as full
frames
* CVE-2020-26146 - Reassembling encrypted fragments with non-consecutive
packet numbers
* CVE-2020-26147 - Reassembling mixed encrypted/plaintext fragments
In general, the scope of these attacks is that they may allow an
attacker to
* inject L2 frames that they can more or less control (depending on the
vulnerability and attack method) into an otherwise protected network;
* exfiltrate (some) network data under certain conditions, this is
specific to the fragmentation issues.
A subset of these issues is known to apply to the Linux IEEE 802.11
implementation (mac80211). Where it is affected, the attached patches
fix the issues, even if not all of them reference the exact CVE IDs.
In addition, driver and/or firmware updates may be necessary, as well
as potentially more fixes to mac80211, depending on how drivers are
using it.
Specifically, for Intel devices, firmware needs to be updated to the
most recently released versions (which was done without any reference
to the security issues) to address some of the vulnerabilities.
To have a single set of patches, I'm also including patches for the
ath10k and ath11k drivers here.
We currently don't have information about how other drivers are, if
at all, affected.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
The can-dev.ko kernel module was moved in kernel 5.4.110 and 5.10.28.
Fixes: 5dcbd82 ("kernel: bump 5.4 to 5.4.110")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[Also compatible with kernel 4.x]
Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
This should fix the problem of mwlwifi-firmware-* not being found
when using the ImageBuilder.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 9b3aaf1)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[mac80211]
5b29614 mac80211: another fix for the sta connection monitor
1ed6eb1 mac80211: backport sched_set_fifo_low
cba4120 mac80211: add support for specifying a per-device scan list
e0d482f rt2x00: mt7620: differentiate based on SoC's CHIP_VER
[package]
amd64-microcode/intel-microcode/linux-firmware: update version
[mac80211]
ca5ee6e mac80211: Fix potential endless loop
2c14710 mac80211: add more AQL fixes/improvements
91fb3ce mac80211: remove an obsolete patch that is no longer doing anything useful
acf1733 mac80211: add preliminary support for enabling 802.11ax in config
d717343 mac80211: update encap offload patches to the latest version
673062f mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited
caf7277 mac80211: do not allow bigger VHT MPDUs than the hardware supports
cd36c0d mac80211: select the first available channel for 5GHz interfaces
1c6d456 mac80211: fix regression in station connection monitor optimization
4bd7689 mac80211: update sta connection monitor regression fix
[target]
Sync: at91, ath25, ath79, lantiq, mediatek, mvebu.
This update fix clients can not get correct IP adress on mt76x2u
Then add disable_usb_sg module parameter to fix wireless devices crash when multi-devices connect to mt76x2u devices (Line 336)
Details: https://github.com/openwrt/mt76/issues/405\#issuecomment-665737497
93e2334 exfat: fix build error on linux-5.4,5.5 kernel
01a7b8c exfat: fix name_hash computation on big endian systems
8f92bc0 exfat: fix wrong size update of stream entry by typo
Removed commented material that was for testing compilation.
Removed patch as the error was fixed upstream. First entry above.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Co-authored-by: Rosen Penev <rosenp@gmail.com>
kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)
431fb8c mac80211: add AQL improvements
6bdd4c9 mac80211: add missing backports for building with 4.14 kernels
0106820 mac80211: add missing return code checks in AQL improvements
e7f7101 mac80211: rework encapsulation offload support
[package]
base-files: add function for generating random MAC
dnsmasq: abort dhcp_check on interface state
boot: sync upstream source code
ath10k-ct-firmware/mt76/sch_cake: update to latest git HEAD
[script]
download: add China Mirror Station
[target]
Sync: arc770, ath79, bcm63xx, kirkwood, lantiq, layerscape,
mediatek, mvebu, octeon, oxnas, pistachio, uml
Sync most of the target patches.
Run-compiled-on: ipq40xx (4.19 & 5.4), ramips
* mac80211: bump to 5.8-rc2
changelog:
dfe0bc8 mac80211: allow ACS restriction with fixed channel
727685c mac80211: rt2x00: define RF5592 in init_eeprom routine
cfd2f3b mac80211: create channel list for fixed channel operation
d1100c7 mac80211: Update to version 5.7.5-1
ed2015c mac80211: Update to version 5.8-rc2-1
a956c14 mac80211: util: don't warn on missing sband iftype data
8b3e170 hostapd: fix incorrect service name
68bf5a9 mac80211: don't kill wireless daemon on teardown
25e0ae6 mac80211: make cfg80211 testmode support optional (and disabled by default)
b7727a8 mac80211: fix AQL issues
3d731fc mac80211: merge performance improvement patches
* mt76: update to 2020-07-22
Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: allow VHT on 2.4GHz
Allow VHT rate on 2.4GHz in order to use 256-QAM
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ath10k: allow VHT on 2.4GHz
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* hostapd: add vendor_vht option
hostapd has vendor_vht option to enable VHT (256-QAM) on 2.4GHz
Add this option to hostapd.sh so users can enable it via uci
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* ipq807x: Refresh kernel configuration
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq807x: Add WCSS bus
This is needed to build ath11k.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Add ath11k
This adds the Qualcomm 802.11ax wireless chipset support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Co-authored-by: Felix Fietkau <nbd@nbd.name>
Co-authored-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
* staging: remove staging exfat driver
This will be replaced with the driver found in newer kernels.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* exfat: add out of tree module
>From an email conversation with the person responsible for upstreaming
the exFAT driver, it seems the staging one in kernel 5.4 is not so
good. Excerpts below.
Namjae Jeon:
Hm... exfat in 5.4 kernel that we did crap shit long time ago is
contributed by someone who we don't know.
This version is unstable and low quality code. We have been improving
it continuously.
and staging version exfat is removed from linux 5.7 kernel.
linux exfat oot version is a backport of exfat in linux 5.7 kernel to
support lower version kernel, and it is a real.
You can see the patch history fro linux-exfat-oot.
this version support timezone and boot sector verification feature newly.
and better filesystem structure and much clean code quality that
reviewed by high profile kernel developers. and add many bug fixes.
And this version is officially maintained by me and kernel guys.
I would not recommend to use staging exfat version.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* automount: switch exFAT driver to high performance ver
Co-authored-by: Rosen Penev <rosenp@gmail.com>
* kernel: Fix miss config and module for mlx driver
Missing config symbols could lead to build failures on kernel
4.14/4.19.
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rephrase commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: add missing config for mlx5 driver
The mlk5 kmod lacks all necessary build symbols
for kernel 4.14 (again).
Add missing symbols to avoid build failure on these targets.
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rewrite commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Tan Zien <nabsdh9@gmail.com>
* mwlwifi: Fix loading with backports v5.3
* mwlwifi: Update the 88W8964's firmware to 9.3.2.12 and fix backports version detection
* remove old patches/001-vendor_command_policy.patch
The Owl Loader (named after the codename that Atheros gave
these devices back in the day) has been accepted upstream.
This patch removes the "misc" driver OpenWrt had and adds
the remaining differences against the version that ships
with 5.4-rc1 into a separate "120-owl-loader-compat.patch"
file that can be cut down once AR71XX is being dealt with.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
