mirror of
https://github.com/Heleguo/lede.git
synced 2025-12-19 20:31:25 +00:00
* ramips: add xiaomi_miwifi-r3 support Specification: - CPU: 580 MHz - Flash size: 128 MiB NAND - RAM size: 128 MiB DDR2 - Wireless No1: SoC-integrated: MT7620A 2x2 MIMO 802.11b/g/n (2.4 GHz) - Wireless No2: On-board chip: MT7612E 2x2 MIMO 802.11a/n/ac (5 GHz) - Switch: MT7620 built-in 10/100 switch w/ vlan support - USB: 2.0 x1 Flash instructions: 1. access ssh via https://wiki.openwrt.org/toh/xiaomi/mir3 2. in ssh: nvram set flag_last_success=1 nvram set boot_wait=on nvram set uart_en=1 nvram commit mtd write lede-ramips-mt7620-miwifi-r3-squashfs-kernel1.bin kernel1 mtd write lede-ramips-mt7620-miwifi-r3-squashfs-rootfs0.bin rootfs0 reboot If you want to revert back to stock fw while on LEDE: insert usb stick (FAT/FAT32) with stock fw renamed to miwifi.bin fw_setenv flag_last_success 0 power off the device hold the reset button and power on the device, keep holding the reset button until yellow led starts blinking. Signed-off-by: Chen Minqiang <ptpt52@gmail.com> * ramips: add mt7620-nand driver for NAND flash This add the mt7620-nand driver and enable nand ubifs for subtarget mt7620 Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Co-authored-by: Chen Minqiang <ptpt52@gmail.com> |
||
|---|---|---|
| .. | ||
| arm-trusted-firmware-mvebu | ||
| arm-trusted-firmware-sunxi | ||
| at91bootstrap | ||
| fconfig | ||
| grub2 | ||
| imx-bootlets | ||
| kexec-tools | ||
| kobs-ng | ||
| rbcfg | ||
| tfa-layerscape | ||
| uboot-ar71xx | ||
| uboot-at91 | ||
| uboot-envtools | ||
| uboot-fritz4040 | ||
| uboot-imx6 | ||
| uboot-kirkwood | ||
| uboot-lantiq | ||
| uboot-layerscape | ||
| uboot-mvebu | ||
| uboot-mxs | ||
| uboot-omap | ||
| uboot-oxnas | ||
| uboot-sunxi | ||
| uboot-tegra | ||
| uboot-zynq | ||