mirror of
https://github.com/Heleguo/lede.git
synced 2025-12-25 23:27:39 +00:00
8061c8b8f9
* kernel: crypto: add atmel i2c hw accelerator support Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> * kernel: add led act/polarity select for rtl8221 phy Signed-off-by: Tianling Shen <cnsztl@gmail.com> * mediatek: add support for OpenEmbed SOM7981 Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 256 MiB SPI-NAND RAM: 0.5/1 GB DDR4 Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B) WiFi: MediaTek MT7976C USB: 1x M.2 B-Key GPIO: 26-Pin header UART: 6 GND, 8 TX, 10 RX (in Pin header) Button: Reset Installation: The board comes with a third-party custom OpenWrt image, you can upload sysupgrade image via LuCI directly WITHOUT keeping configurations. Or power on the board with pressing reset button for 5 second, then visit http://192.168.1.1 and upload -factory.bin firmware. Signed-off-by: Tianling Shen <cnsztl@gmail.com> --------- Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Signed-off-by: Tianling Shen <cnsztl@gmail.com> |
||
|---|---|---|
| .. | ||
| 001-depends.mk | ||
| block.mk | ||
| can.mk | ||
| crypto.mk | ||
| firewire.mk | ||
| fs.mk | ||
| gpio.mk | ||
| hwmon.mk | ||
| i2c.mk | ||
| iio.mk | ||
| input.mk | ||
| leds.mk | ||
| lib.mk | ||
| multiplexer.mk | ||
| netdevices.mk | ||
| netfilter.mk | ||
| netsupport.mk | ||
| nls.mk | ||
| other.mk | ||
| pcmcia.mk | ||
| sound.mk | ||
| spi.mk | ||
| usb.mk | ||
| video.mk | ||
| virt.mk | ||
| w1.mk | ||
| wpan.mk | ||