AmadeusGhost c07e97d809 ramips: add support for JCG Q20 (#6850) ... JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. Signed-off-by: AmadeusGhost <amadeus@jmu.edu.cn>		2021-05-21 13:44:01 +08:00
..
apm821xx
ar71xx	kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)	2020-08-26 11:31:50 +08:00
ath79	kernel: bump 5.4 to 5.4.95 (#6340)	2021-02-08 17:13:28 +08:00
cns3xxx
imx6	kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)	2020-08-26 11:31:50 +08:00
ipq40xx	kernel: bump 5.4 to 5.4.91 (#6225)	2021-01-21 20:51:19 +08:00
ipq806x	kernel: bump 5.4 to 5.4.91 (#6225)	2021-01-21 20:51:19 +08:00
kirkwood	kernel: bump to 4.14.193, 4.19.138, 5.4.59 (#5350)	2020-08-26 11:31:50 +08:00
lantiq	kernel: bump 5.4 to 5.4.68 (#5555)	2020-10-03 00:36:16 +08:00
layerscape
mpc85xx
mvebu	kernel: bump 5.4 to 5.4.79 and add mt7620-nand driver (#5830)	2020-11-28 16:43:16 +08:00
mxs
oxnas
pistachio
ramips	ramips: add support for JCG Q20 (#6850)	2021-05-21 13:44:01 +08:00
uboot-envtools.sh