Overhaul the way platform-specific requirements are handled since
IPQ60xx and IPQ50xx don't support all the same features as IPQ807x.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
First attempt at backporting the 12.5 ipq50xx fixes to 11.4.
Fixes compilation errors, but not tested on hardware yet.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
- Added proper CONFLICTS which should allow building multiple
firmwares in the same build tree.
- Updated version string for 11.4 (it was 5 when it's been 6 for a while)
- Adjusted nss-eip-firmware dependency to match IPQ807x/IPQ60xx since
'TARGET_qualcommax` included IPQ50xx which does not have EIP hardware.
- PKG_RELEASE bumped to 2
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Mostly cosmetic changes, but also:
* Extend kernel version handling so kernels 6.1–6.14
are supported (untested on > 6.6)
* Replace various `NSS_SUCCESS`/`NSS_FAILURE` return codes with
`NSS_TX_SUCCESS`/`NSS_TX_FAILURE`
* Change di_data.response initialization in the dynamic interface
to use NSS_CMN_RESPONSE_ACK.
Primary affects `0016-nss-drv-add-support-for-kernel-6.6.patch`, while
other patches were refreshed.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
When building NSS GRE feature for non IPQ807x targets, the GRE `stats_ctx`
was not being properly defined.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This commit updates 12.5 version of the nss-drv from:
30fbfa4 -> 4dfab93
Bringing in the following changes:
```
2024-11-13 - d5ee67b - Add support for clearing N2H stats
2024-11-13 - 4850be3 - Add support for clearing DRV stats
2024-11-13 - 3d7c16d - Add support for clearing capwap stats
2024-11-13 - 163fbf4 - Add support clearing Crypto CMN stats
2024-11-13 - 084b475 - Add support for clearing DTLS CMN stats
2024-11-13 - e32f844 - Add support clearing PVxLAN stats
2024-11-13 - 2f54141 - Add support for clearing ipv6 stats
2024-11-13 - 702b14c - Add support for clearing C2C TX stats
2024-11-13 - 201dbc5 - Add support for clearing ipv4 stats
2024-11-13 - 24b6f1a - Add support for clearing eth_rx stats
2024-11-05 - 6e242de - Add support for clearing C2C RX stats
2024-11-05 - 942593c - Added a flag to identify if HW UDP checksum is supported for udp_st
2024-11-05 - e11eb4e - Add support for clearing Trustsec TX stats
2024-11-05 - 4f01399 - Add support for clearing EDMA Lite stats
2024-11-05 - 45b9a31 - Add support for clearing Trustsec RX stats
2024-11-05 - 57b338d - Add baseline stats write functionality
2024-10-16 - b671190 - Fix dtsi parameter that controls enabling UBI
2024-10-08 - 9514a99 - Enabling qca-nss-drv on 6.6 kernel
2024-07-16 - e96972f - udp_st: Add a new mode to handle unsynchronized time.
2024-05-16 - 1db9e55 - Add missing error code for wifili pkg.
```
Stats can be cleared by echoing `0` to the corresponding stats file.
For example, to clear the N2H stats, you can run:
```
echo 0 > /sys/kernel/debug/qca-nss-drv/stats/n2h
```
* qca-nss-drv: add ipq5018 support
* qca-nss-clients: add ipq5018 support
* qca-nss-crypto: add ipq5018 support
* qca-nss-cfi: add ipq5018 support
* qca-nss-macsec: add ipq5018 support
mac80211 is built inside of the main openwrt fork, so it will always
generate a more up to date `/etc/ipq_release` when being packaged.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Replace showing `gro` (Generic Recieve Offload) with
`rx-gro-list` (GRO Fraglist) as that is the more problematic
feature known to cause issues.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This is meant to ease debugging when asking for support. Just run the
command "nss_diag" and include in your issues/forum posts.
Example of output
```
MODEL: Linksys MX5300
OPENWRT: r27608+169-3f98f68573
IPQ BRANCH: qualcommax-6.x-nss-mx4300-6.11
IPQ COMMIT: 2153dceb34
IPQ DATE: 2024-10-03
NSS FW: NSS.HK.11.4.0.5-6-R
MAC80211: v6.11-0-g98f7e32f20d2
ATH11K FW: WLAN.HK.2.12-01368-QCAHKSWPL_SILICONZ-1
GRO: wan : on
br-lan : on
lan1 : on
lan2 : on
lan3 : on
lan4 : on
phy0-mesh0 : on
phy1-ap0 : on
phy2-ap0 : on
NSS PKGS: kmod-qca-nss-cfi-cryptoapi - 6.6.53.12.5.2022.12.15~5cd07ce-r3
kmod-qca-nss-crypto - 6.6.53.12.5.2022.12.15~3c5a574-r3
kmod-qca-nss-dp - 6.6.53.2024.04.16~5bf8b91e-r1
kmod-qca-nss-drv - 6.6.53.11.4.0.5.2021.09.13~53e5863-r13
kmod-qca-nss-drv-bridge-mgr - 6.6.53.11.4.0.5.2021.08.17~c4049d1-r7
kmod-qca-nss-drv-igs - 6.6.53.11.4.0.5.2021.08.17~c4049d1-r7
kmod-qca-nss-drv-qdisc - 6.6.53.11.4.0.5.2021.08.17~c4049d1-r7
kmod-qca-nss-drv-vlan-mgr - 6.6.53.11.4.0.5.2021.08.17~c4049d1-r7
kmod-qca-nss-drv-wifi-meshmgr - 6.6.53.11.4.0.5.2021.08.17~c4049d1-r7
kmod-qca-nss-ecm - 6.6.53.12.5.5.2024.09.02~bd5057b-r1
nss-eip-firmware - 2.5.7-r3
nss-firmware-default - 2024.08.04~794fe373-r1
nss-firmware-ipq8074 - 2024.08.04~794fe373-r1
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Cleans up mesh stats naming to remove 'mesh' from prefix as it's already
prefixed when displaying. Otherwise it shows up as 'mesh_mesh'
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Ensures NSS cores are fully booted to hopefully workaround issues with
wifi stats (rx/tx rates) and inactive time.
Patch-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This bumps NSS 11.4.0.5-5 to 11.4.0.5-6 along with the driver and client
packages.
This is the actual final release of 11.4.0.5 series. It brings in
changes related to mesh dummy paths and wifi.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
The idea that "newer" NSS firmware = "better" is not always true.
Especially given that 11.4 is the only firmware known to work with mesh,
among other issues like WDS/rmnet_nss being broken on 12.5 releases.
Add option to allow building for all known and available NSS firmwares.
The following are now supported NSS firmwares:
1.) 11.4.0.5-5
2.) 12.1
3.) 12.2
4.) 12.5
Users should start with 11.4 as that seems to be the one with the most
enabled features. It is now also the default version.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This script is meant to set various skb_recycler settings. There is a
similar version in QSDK, but it's packaged in the main repo, rather than
an external package like 'qca-nss-drv'. To avoid making too many changes
in the main repo, introduce this script in `qca-nss-drv`.
This script will read the following config:
/etc/config/skb_recycler
```
config skb_recycler 'opt'
option max_skbs '1024'
option max_spare_skbs '256'
option enable '1'
```
Users are encouraged to experiment disabling `skb_recycler` to see if
memory leaks are still occuring, especially on 512M boards. There are issues
currently where skb_recycler corrupts skbs during times of high traffic, but there
wasn't a way to completely disable it.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
* Cleaned up backports patch to only bring in header changes if they are
not tied directly to NSS firmware API. Because the API for NSS
firmware has strict structure and ordering, it ends up messing with
driver calls.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
`0012-Makefile-modularize-driver.patch` mistakenly added 'wifi_mesh_init'
when it was already in 'nss_init.c'.
The patch following `0013-backport-12.4.patch` would then
clean up the "duplicated" entries.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Added a custom function to show NSS firmware version during boot.
```
[Mon Jul 8 07:45:21 2024] qca-nss 39000000.nss: NSS FW Version: NSS.FW.12.1-022-HK.R
```
And
```
[Mon Jul 8 07:21:12 2024] qca-nss 39000000.nss: NSS FW Version: NSS.HK.11.4.0.5-5-R
```
Not sure why Qualcomm never included this ability in their drivers, since
it's clearly there in every firmware.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Cleaned up formatting and changed the way console messages are printed.
The message will now properly show up in dmesg output with color, and
date formatting rather than a non descriptive message like the following:
Before:
```
/lib/firmware/qca-nss0-retail.bin 33
/lib/firmware/qca-nss1-retail.bin 33
```
After:
```
[Mon Jul 8 07:21:12 2024] hotplug: symlinking /lib/firmware/qca-nss0.bin to /lib/firmware/qca-nss0-retail.bin
[Mon Jul 8 07:21:12 2024] hotplug: symlinking /lib/firmware/qca-nss1.bin to /lib/firmware/qca-nss1-retail.bin
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This is mostly a cosmetic change and meant to make it easier to see
the to see history of commits.
The currently published NSS FW on QUIC's repo is:
NSS.HK.11.4.0.5-5-R which is on branch caf_migration/NHSS.QSDK.11.4.0.5
However, it's not the latest of the `11.4.0.5` release which is
NSS.HK.11.4.0.5-6-R which is on branch `origin/NSS_11.4.0.5`
Although the versions look to be minor releases. NSS driver shows
significant changes in the headers files concerning `wifi` and `wifi
mesh`.
When doing a diff between the 2 releases, it was hard to tell exactly
what changed because most of it seemed to be non-functional changes,
formatting, etc. This patch is only meant to make the files visually
similiar between the two releases, to better show functional changes.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
refactored the logic in `__nss_hal_request_irq` to use case statements,
with a single call to `netif_napi_add_weight` and `request_irq`.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Reworked flawed smp_affinity logic. It was assumed that all 'nss_*' IRQs
needed to be equally balanced across all CPUs. However, what ends up
happening most of the time is messing with scheduling, thrashing, missed
cache and high context switching.
For each core:
1. nss_empty_buf_sos
2. nss_empty_buf_queue
3. nss_queue0
The IRQs should be kept on the same CPU. Doing so allows NSS cores to
properly feed and empty the queues.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
This allows specifiying `CONFIG_NSS_FIRMWARE_VERSION_.*` on
the command line without having to set in .config. This is helpful if
needing to build/test both version quickly.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Update to comply with APK's `pkgver` format.
Rather than stick with the same convention as upstream `qca-ssdk` and
`qca-nss-dp` which uses:
```
$(PKG_NAME)-$(PKG_SOURCE_DATE)~$(PKG_SOURCE_VERSION)
```
i.e. `qca-ssdk-2024.06.13~c451136b.tar.zst`
Add in the QSDK version as part of the release since we
have options to build for both 11.4 and 12.5. This makes it easier to
debug build related issues, by knowing exactly which QSDK version is
being built against.
Example:
```
qca-nss-drv-11.4.0.5.2021.06.24~dc14ca2.tar.zst
qca-nss-drv-12.5.2024.04.06~53a0dc1.tar.zst
qca-nss-clients-11.4.0.5.2021.08.17~153998d.tar.zst
qca-nss-clients-12.5.2024.03.05~9a53b18.tar.zst
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
allow users to specify specific metric to view, rather than
everything
Available stats objects:
cpu
crypto_cmn
dma
drv
dynamic_if
edma
eth_rx
ipv4
ipv6
n2h
unaligned
virt_if
wifi_ext_vdev
wifi
mesh
Usage: nss_stats obj1 obj2 ...
Default with no parameters shows all
Signed-off-by: Sean Khan <datapronix@protonmail.com>
note: qca-nss-crypto, and qca-nss-cfi are non-code change releases, but
align with naming scheme upstream anyways.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
1.) Rather than modify upstream `smp_affinity` script, move changes into
this init script.
Primarily: "xhci-hcd:usb1", "ppdu-end-interrupts-mac1", "ppdu-end-interrupts-mac2"
2.) Move logging into separate function, and better account for NSS core
specific output.
3.) Set the defaults for `enable_rps` and `enable_log` to true ('1').
4.) Change startup to sequence to `94` [after `smp_affinity` (93)]
Signed-off-by: Qosmio <datapronix@protonmail.com>
