mirror of
https://github.com/King-Of-Knights/openwrt-6.x.git
synced 2025-12-16 16:21:39 +00:00
mediatek: filogic: add support for Totolink X6000R
Specification : - SOC : Mediatek MT7981B (1.3GHz) - RAM : 256MB - Flash : 16MB SPI NOR - Ports : 4 LAN (1G) & 1 WAN (1G) - WIFI : MediaTek dual-band WiFi 6 - 2.4 GHz : b/g/n/ax, MIMO 2x2 - 5 GHz : a/n/ac/ax, MIMO 2x2 - Buttons : Reset & WPS/Mesh - LEDS : WAN (Green), Status (Red & Blue) - Power : 12V1A Install via OEM web ui: Upload the sysupgrade image to firmware upgrade page on OEM web ui Install via recovery / revert to stock firmware: 1. Unplug from power 2. Download the Sysupgrade (for openwrt installation) or OEM Factory image (for revert to stock firmware) 3. Set your computer ethernet IP to 192.168.1.X, subnet 255.255.255.0 (X=your chosen ip number ranging from 2-254) 4. Press and hold reset button while turn on / plug power adapter to the router. Wait untill ALL LAN green LED turn on, then release the reset button. 5. Plug the LAN cable from your computer into LAN 1 port then open web browser, and type in the address column : 192.168.1.1 6. Upload the sysupgrade / oem factory image 7. Wait until the router finished flashing (the router will reboot) 8. Set ethernet ip to dhcp 9. Open 192.168.1.1 (for openwrt install) / 192.168.0.1 (for OEM firmware) Signed-off-by: Ari Kurniawan <noobhek@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20035 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Ari Kurniawan
Hauke Mehrtens
parent
9401b8b86d
commit
7cd10add2d
254
target/linux/mediatek/dts/mt7981b-totolink-x6000r.dts
Normal file
254
target/linux/mediatek/dts/mt7981b-totolink-x6000r.dts
Normal file
@ -0,0 +1,254 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TOTOLINK X6000R";
|
||||
compatible = "totolink,x6000r", "mediatek,mt7981";
|
||||
|
||||
aliases {
|
||||
label-mac-device = &gmac0;
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status_red;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x10000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_WAN;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&pio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status_red: led-1 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_status: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins &gbe_led0_pins &gbe_led1_pins>;
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
nvmem-cells = <&macaddr_factory_14>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
label = "wan";
|
||||
|
||||
nvmem-cells = <&macaddr_factory_1a>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
label = "cpu";
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x00000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "Factory";
|
||||
reg = <0x50000 0xb0000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_factory_14: macaddr@14 {
|
||||
reg = <0x14 0x6>;
|
||||
};
|
||||
|
||||
macaddr_factory_1a: macaddr@1a {
|
||||
reg = <0x1a 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "FIP";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
compatible = "denx,fit";
|
||||
label = "firmware";
|
||||
reg = <0x180000 0xe00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi2_flash_pins: spi2-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi2", "spi2_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
@ -207,6 +207,9 @@ teltonika,rutc50)
|
||||
ucidef_set_led_netdev "wan-green" "WAN" "mdio-bus:00:green:wan" "wan" "link_1000 tx rx"
|
||||
ucidef_set_led_netdev "wan-amber" "WAN" "mdio-bus:00:amber:wan" "wan" "link_100 link_10 tx rx"
|
||||
;;
|
||||
totolink,x6000r)
|
||||
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
ucidef_set_led_netdev "port2-green-act" "port-2" "green:port2_act" "port2" "link tx rx"
|
||||
ucidef_set_led_netdev "port1-green-act" "port-1" "green:sfp" "port1" "link tx rx"
|
||||
|
||||
@ -2012,6 +2012,17 @@ define Device/tenbay_wr3000k
|
||||
endef
|
||||
TARGET_DEVICES += tenbay_wr3000k
|
||||
|
||||
define Device/totolink_x6000r
|
||||
DEVICE_VENDOR := TOTOLINK
|
||||
DEVICE_MODEL := X6000R
|
||||
DEVICE_DTS := mt7981b-totolink-x6000r
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE_SIZE := 14336k
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += totolink_x6000r
|
||||
|
||||
define Device/tplink_archer-ax80-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := Archer AX80V1
|
||||
|
||||
Loading…
Reference in New Issue
Block a user