mirror of
https://github.com/LiBwrt-op/openwrt-6.x.git
synced 2025-12-16 16:57:28 +00:00
bcm4908: drop support for kernel 6.6
Drop support for kernel 6.6 as now kernel 6.12 is set as default kernel version. Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20888 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This commit is contained in:
Goetz Goerisch
Christian Marangi
parent
2830d3b434
commit
e9b7a9e42c
@ -1,277 +0,0 @@
|
||||
CONFIG_64BIT=y
|
||||
CONFIG_ARCH_BCM=y
|
||||
CONFIG_ARCH_BCMBCA=y
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_FORCE_MAX_ORDER=10
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=18
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_PROC_KCORE_TEXT=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_STACKWALK=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANTS_NO_INSTR=y
|
||||
CONFIG_ARCH_WANTS_THP_SWAP=y
|
||||
CONFIG_ARM64=y
|
||||
CONFIG_ARM64_4K_PAGES=y
|
||||
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
|
||||
CONFIG_ARM64_PAGE_SHIFT=12
|
||||
CONFIG_ARM64_PA_BITS=48
|
||||
CONFIG_ARM64_PA_BITS_48=y
|
||||
CONFIG_ARM64_PTR_AUTH=y
|
||||
CONFIG_ARM64_PTR_AUTH_KERNEL=y
|
||||
CONFIG_ARM64_SVE=y
|
||||
CONFIG_ARM64_TAGGED_ADDR_ABI=y
|
||||
CONFIG_ARM64_VA_BITS=39
|
||||
CONFIG_ARM64_VA_BITS_39=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_GIC_V3=y
|
||||
CONFIG_ARM_GIC_V3_ITS=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
|
||||
CONFIG_B53=y
|
||||
CONFIG_BCM4908_ENET=y
|
||||
CONFIG_BCM7038_WDT=y
|
||||
CONFIG_BCM7XXX_PHY=y
|
||||
CONFIG_BCM_NET_PHYLIB=y
|
||||
CONFIG_BCM_PMB=y
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC=y
|
||||
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
|
||||
CONFIG_CLK_BCM_63XX=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200"
|
||||
CONFIG_CMDLINE_FROM_BOOTLOADER=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMMON_CLK_IPROC=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
# CONFIG_COMPAT_32BIT_TIME is not set
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRYPTO_AES_ARM64=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
|
||||
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
|
||||
CONFIG_CRYPTO_CRYPTD=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_GHASH_ARM64_CE=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_GF128MUL=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC=y
|
||||
CONFIG_DMA_DIRECT_REMAP=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FS_IOMAP=y
|
||||
CONFIG_FUNCTION_ALIGNMENT=4
|
||||
CONFIG_FUNCTION_ALIGNMENT_4B=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
|
||||
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_CSUM=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IOREMAP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
||||
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_GPIO_GENERIC=y
|
||||
CONFIG_GPIO_GENERIC_PLATFORM=y
|
||||
CONFIG_GRO_CELLS=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HZ_PERIODIC=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_BRCMSTB=y
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
CONFIG_LEDS_BCM63138=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MDIO_BCM_UNIMAC=y
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MIGRATION=y
|
||||
# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
|
||||
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
CONFIG_MTD_BRCM_U_BOOT=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_NAND_BRCMNAND=y
|
||||
CONFIG_MTD_NAND_BRCMNAND_BCMBCA=y
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_OF_PARTS_BCM4908=y
|
||||
# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPLIT_CFE_BOOTFS=y
|
||||
# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NET_DEVLINK=y
|
||||
CONFIG_NET_DSA=y
|
||||
CONFIG_NET_DSA_BCM_SF2=y
|
||||
CONFIG_NET_DSA_TAG_BRCM=y
|
||||
CONFIG_NET_DSA_TAG_BRCM_COMMON=y
|
||||
CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
|
||||
CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
|
||||
CONFIG_NET_DSA_TAG_NONE=y
|
||||
CONFIG_NET_EGRESS=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_INGRESS=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_XGRESS=y
|
||||
CONFIG_NO_IOPORT_MAP=y
|
||||
CONFIG_NR_CPUS=4
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_LAYOUTS=y
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_NVMEM_U_BOOT_ENV=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
CONFIG_PARTITION_PERCPU=y
|
||||
CONFIG_PER_VMA_LOCK=y
|
||||
CONFIG_PGTABLE_LEVELS=3
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYLIB_LEDS=y
|
||||
CONFIG_PHYLINK=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
# CONFIG_PHY_BRCM_SATA is not set
|
||||
CONFIG_PHY_BRCM_USB=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_BCM4908=y
|
||||
# CONFIG_PINCTRL_SINGLE is not set
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_GENERIC_DOMAINS=y
|
||||
CONFIG_PM_GENERIC_DOMAINS_OF=y
|
||||
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_SYSCON=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PREEMPT_NONE_BUILD=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
CONFIG_QUEUED_RWLOCKS=y
|
||||
CONFIG_QUEUED_SPINLOCKS=y
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_RELOCATABLE=y
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
CONFIG_SERIAL_BCM63XX=y
|
||||
CONFIG_SERIAL_BCM63XX_CONSOLE=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSEMEM=y
|
||||
CONFIG_SPARSEMEM_EXTREME=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UNMAP_KERNEL_AT_EL0=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_VMAP_STACK=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA32=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
@ -1,31 +0,0 @@
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Thu, 28 Mar 2024 10:24:34 +0100
|
||||
Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: set
|
||||
brcm,wp-not-connected
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Every described BCM4908 board has WP pin not connected. This caused
|
||||
problems for drivers since day 0 but there was no property to describe
|
||||
that properly. Projects like OpenWrt were modifying Linux driver to deal
|
||||
with it.
|
||||
|
||||
It's not clear if that is hardware limitation or just reference design
|
||||
being copied over and over but this applies to all known / supported
|
||||
BCM4908 boards. Handle it by marking WP as not connected by default.
|
||||
|
||||
Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
|
||||
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
|
||||
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
|
||||
@@ -594,6 +594,7 @@
|
||||
reg-names = "nand", "nand-int-base";
|
||||
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "nand_ctlrdy";
|
||||
+ brcm,wp-not-connected;
|
||||
status = "okay";
|
||||
|
||||
nandcs: nand@0 {
|
||||
@ -1,23 +0,0 @@
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Mon, 15 Feb 2021 22:01:03 +0100
|
||||
Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: limit amount of GPIOs
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Linux driver can't handle more than 64 GPIOs
|
||||
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
|
||||
--- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
|
||||
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
|
||||
@@ -341,7 +341,7 @@
|
||||
gpio0: gpio-controller@500 {
|
||||
compatible = "brcm,bcm6345-gpio";
|
||||
reg-names = "dirout", "dat";
|
||||
- reg = <0x500 0x28>, <0x528 0x28>;
|
||||
+ reg = <0x500 0x8>, <0x528 0x8>;
|
||||
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
@ -1,30 +0,0 @@
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Thu, 12 Aug 2021 11:52:42 +0200
|
||||
Subject: [PATCH] arm64: don't issue HVC on boot
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Broadcom's CFE loader seems to miss setting SCR_EL3.HCE which results in
|
||||
generating an UNDEF and kernel panic on the first HVC.
|
||||
|
||||
HVC gets issued by kernels 5.12+ while booting, by kexec and KVM. Until
|
||||
someone finds a workaround we have to avoid all above.
|
||||
|
||||
Workarounds: 0c93df9622d4 ("arm64: Initialise as nVHE before switching to VHE")
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
arch/arm64/kernel/hyp-stub.S | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
--- a/arch/arm64/kernel/hyp-stub.S
|
||||
+++ b/arch/arm64/kernel/hyp-stub.S
|
||||
@@ -252,7 +252,7 @@ SYM_FUNC_START(finalise_el2)
|
||||
b.ne 1f
|
||||
|
||||
mov x0, #HVC_FINALISE_EL2
|
||||
- hvc #0
|
||||
+// hvc #0
|
||||
1:
|
||||
ret
|
||||
SYM_FUNC_END(finalise_el2)
|
||||
@ -1,46 +0,0 @@
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Mon, 15 Feb 2021 23:59:26 +0100
|
||||
Subject: [PATCH] net: dsa: bcm_sf2: enable GPHY for switch probing
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
GPHY needs to be enabled to succesfully probe & setup switch port
|
||||
connected to it. Otherwise hardcoding PHY OUI would be required.
|
||||
|
||||
Before:
|
||||
brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch wan (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 7
|
||||
|
||||
After:
|
||||
brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
|
||||
brcm-sf2 80080000.switch wan (uninitialized): PHY [800c05c0.mdio--1:0c] driver [Generic PHY] (irq=POLL)
|
||||
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
drivers/net/dsa/bcm_sf2.c | 4 ++++
|
||||
1 file changed, 4 insertions(+)
|
||||
|
||||
--- a/drivers/net/dsa/bcm_sf2.c
|
||||
+++ b/drivers/net/dsa/bcm_sf2.c
|
||||
@@ -1524,10 +1524,14 @@ static int bcm_sf2_sw_probe(struct platf
|
||||
rev = reg_readl(priv, REG_PHY_REVISION);
|
||||
priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
|
||||
|
||||
+ bcm_sf2_gphy_enable_set(priv->dev->ds, true);
|
||||
+
|
||||
ret = b53_switch_register(dev);
|
||||
if (ret)
|
||||
goto out_mdio;
|
||||
|
||||
+ bcm_sf2_gphy_enable_set(priv->dev->ds, false);
|
||||
+
|
||||
dev_info(&pdev->dev,
|
||||
"Starfighter 2 top: %x.%02x, core: %x.%02x, IRQs: %d, %d\n",
|
||||
priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
|
||||
@ -1,30 +0,0 @@
|
||||
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
||||
Date: Tue, 16 Feb 2021 00:06:35 +0100
|
||||
Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908
|
||||
|
||||
Trying to access disabled PHY results in MDIO_READ_FAIL and:
|
||||
[ 11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode
|
||||
[ 11.972500] 8021q: adding VLAN 0 to HW filter on device wan
|
||||
[ 11.980205] ------------[ cut here ]------------
|
||||
[ 11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58
|
||||
|
||||
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
||||
---
|
||||
drivers/net/dsa/bcm_sf2.c | 6 ++++++
|
||||
1 file changed, 6 insertions(+)
|
||||
|
||||
--- a/drivers/net/dsa/bcm_sf2.c
|
||||
+++ b/drivers/net/dsa/bcm_sf2.c
|
||||
@@ -1538,6 +1538,12 @@ static int bcm_sf2_sw_probe(struct platf
|
||||
priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
|
||||
priv->irq0, priv->irq1);
|
||||
|
||||
+ /* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable
|
||||
+ * GPHY when needed. Leave it enabled here.
|
||||
+ */
|
||||
+ if (priv->type == BCM4908_DEVICE_ID)
|
||||
+ bcm_sf2_gphy_enable_set(priv->dev->ds, true);
|
||||
+
|
||||
return 0;
|
||||
|
||||
out_mdio:
|
||||
Loading…
Reference in New Issue
Block a user