Ensure that hapd->own_addr is set properly, since hostapd_setup_bss
only handles it for secondary BSS interfaces
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Glibc since 2.41 tries to include linux/sched/types.h from sched.h, and
pointing KERNEL_INCLUDE to the kernel headers makes it use
linux/sched/types.h from the kernel headers instead of the installed
one.
This then breaks the configure (test) compile for setns() and the test:
mips-openwrt-linux-gnu-gcc -I/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi -o config.HaAJYe/setnstest config.HaAJYe/setnstest.c
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/sched/types.h:5,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/bits/sched.h:63,
from /fork.openwrt/staging_dir/toolchain-mips_24kc_gcc-14.3.0_glibc/include/sched.h:43,
from config.HaAJYe/setnstest.c:2:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:10:2: warning: #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders" [-Wcpp]
10 | #warning "Attempt to use kernel headers from user space, see https://kernelnewbies.org/KernelHeaders"
| ^~~~~~~
In file included from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/posix_types.h:5,
from /fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/types.h:14:
/fork.openwrt/build_dir/target-mips_24kc_glibc/linux-ath79_generic/linux-6.6.93/include/uapi/linux/stddef.h:5:10: fatal error: linux/compiler_types.h: No such file or directory
5 | #include <linux/compiler_types.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Fix this by pointing KERNEL_INCLUDE to the toolchain headers, which
include the installed kernel headers.
Tested with musl, glibc, and SDK.
Fixes: 60738feded ("iproute2: Fix KERNEL_INCLUDE in SDK")
Reported-by: Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Add a patch in order to fix it.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18600
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport two patches in order to fix it.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18600
Signed-off-by: Robert Marko <robimarko@gmail.com>
The plumbing is there in the ucode files to set the parameter using
nl80211. However, the option is never forwarded because it was missing
in mac80211.sh. Add it there and in the schema file.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://github.com/openwrt/openwrt/pull/19030
Signed-off-by: Robert Marko <robimarko@gmail.com>
61ae5732adea iprule: amend ipproto netlink nla_put_u32 to nla_put_u8
d610d68c71b8 device: add support for configuring vrf
a1b6386a20a6 device: fix bonding primary port selection
e8bbf246ce2e system-linux: fix sysfs name for all_ports_active flag
723c699e84f4 Restore disable_ipv6 sysctl after removing a device from bridge or bond
d476e18e8d43 iprule: resolve ipproto by name
7901e66c5f27 netifd: iprule add sport and dport
Signed-off-by: Robert Marko <robimarko@gmail.com>
Inverted condition caused wrong value for eht_oper_centr_freq_seg0_idx
get selected in ETH320 mode, causing AP fail to start.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Link: https://github.com/openwrt/openwrt/pull/18998
Signed-off-by: Robert Marko <robimarko@gmail.com>
Request Softwire46 (S46) [RFC 7598] options when the map and/or ds-lite
packages are installed. This is required as the behaviour of odhcp6c has
changed to not include these OROs by default.
See openwrt/odhcp6c#89
Signed-off-by: Richard Patterson <richard@helix.net.nz>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
When running ACS on multi-radio devices, ACS on one band can block another.
Increase the number of retries and prevent bouncing interfaces between AP
and STA mode during attempts.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some modems and SIM cards take a bit longer to initialize after UIM has been
powered off. Waiting too little time can cause the qmi protocol to end up
in a loop repeatedly power-cycling the SIM card.
Avoid that by
a) increasing the time we unconditionally sleep after --uim-power-on
b) increasing the time we allow uqmi to wait for response for --uim-get-sim-state
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18772
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the uci 'dhcp' configuration for the dhcp leases is incorrect then
the call to 'ipclac' fails. However, the problem is that the dnsmasq
configuration option 'dhcp-range' is still written for this uci section
even though the information generated by ipcalc is incorrect or not set.
Due to the incorrectly generated configuration for dnsmasq, the service
cannot start.
To prevent an incorrect configuration from being written to the configuration,
a check is now made beforehand to ensure that the required variables are
present and valid. If the configuration is incorrect, a message is emitted
to the log that this configuration section is incorrect and this uci
configuration section is omitted.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/18641
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ucode-based wifi interface validation is based on `hostapd.conf`
specific options, which means it's missing the OpenWrt-specific
'network' property.
This causes schema validation warnings like:
```
daemon.notice netifd: radio1 (1340): wifi-scripts: network is not present in the schema
```
The description is taken from the OpenWrt wiki:
https://openwrt.org/docs/guide-user/network/wifi/basic#common_options1
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18946
Signed-off-by: Robert Marko <robimarko@gmail.com>
263a0cb87b50 udebug: use proper libudebug API
ca9b8765aea3 dns: rework packet API
ea40cfdf7eb0 cache: send multiple queries in a single packet
d62813727e53 cache: add explicit lookup for host addresses
0ce73d80dc0c dns: add cache/queue for outgoing queries
083be33749b1 cache: improve service refresh behavior
55d0c1bc1ac5 interface: ask for unicast responses by default
ce508467a533 service: add support for setting service specific hostname
632953a1582d interface: when interface properties change, reinitialise
695ac3708aa0 ubus: fix ubus announcements txt fields
cecbe1c0caae Make mdns responder case-insensitive.
2b28094d31ca dns: add support for reverse address mapping queries
Signed-off-by: Felix Fietkau <nbd@nbd.name>
By OpenWrt's design, hostapd runs in a single global instance for all radios supported by the device, rather than one instance per radio like hostapd usually does.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
Manually refreshed:
301-mesh-noscan.patch
601-ucode_support.patch
770-radius_server.patch
Automatically rebased all other patches.
Signed-off-by: Agustin Lorenzo <agustin.lorenzo@thinco.es>
Link: https://github.com/openwrt/openwrt/pull/18426
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some MBIM devices can exist on an MHI bus (over PCIe) instead of being presented as USB devices.
In such cases the interface name lookup needs to be done from /sys/class/wwan/ instead of /sys/class/usbmisc/
Add another readlink call in case the first lookup fails.
This allows the MBIM protocol to find the interface name and then work with both type of devices provided that /etc/config/network has the right device for MBIM interface (such as /dev/wwan0mbim0 in case of MHI)
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
The device manufacturer name for Qualcomm Atheros is listed
as "Qualcomm, Atheros" for PCI devices but "Qualcomm Atheros" under
"compatible". This gives inconsistent results in `iwinfo` and
```
Hardware: 0x168c:0x0046 0x168c:0xcafe [Qualcomm, Atheros QCA9984]
Hardware: embedded [Qualcomm Atheros IPQ8074]
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
The 'unknown' string was misspelled as 'unknonw'.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add 'dBm' units to 'Signal' and 'Noise' to match what non-ucode iwinfo shows.
Before:
Signal: -49 Noise: -103
After:
Signal: -49 dBm Noise: -103 dBm
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
When bitrate is unknown, the units shouldn't be displayed. This is
consistent with other "unknown" fields and non-ucode iwinfo.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18039
Signed-off-by: Robert Marko <robimarko@gmail.com>
Version 6.14 - April 7, 2025
* Feature: list PHYs (--show-phys)
* Feature: target a specific PHY with some commands (--phy)
* Feature: more attributes for C33 PSE (--show-pse, --set-pse)
* Feature: source information for cable tests (--cable-test[-tdr])
* Feature: JSON output for module info (-m)
* Feature: misc RSS hash info improvements (-x)
* Feature: tsinfo hwtstamp provider (--{get,set}-hwtimestamp-cfg)
* Fix: fix wrong auto-negotiation state (no option)
* Fix: more explicit RSS context action (-n)
* Fix: print PHY address as decimal (no option)
* Fix: fix return value on flow hashing error (-N)
* Fix: fix JSON output for IRQ coalescing
* Fix: fix MDI-X info output (no option)
* Misc: code cleanup in module parsers
* Misc: provide module_info JSON schema
* Misc: add '-j' alias for --json
* Misc: provide AppStream metainfo XML
* Misc: update message descriptions for debugging output
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Signed-off-by: Chad Monroe <chad@monroe.io>
Link: https://github.com/openwrt/openwrt/pull/18803
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport patches to support scans of WiFi 7 APs.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18741
Signed-off-by: Robert Marko <robimarko@gmail.com>
Enable Device Provisioning Protocol (DPPv2) in hostapd
for the "full" build-variants.
DPPv2 currently does not compile with WolfSSL due to
missing PKCS7 and certificate support.
Link: https://github.com/openwrt/openwrt/pull/18485
Signed-off-by: Gustavo Bertoli <gubertoli@gmail.com>
On big endian platforms, scans show invalid info for WiFi 6 APs.
This commit backports patches to fix this issue.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/18717
Signed-off-by: Robert Marko <robimarko@gmail.com>
This fixes the following compile problem:
```
checking for asm/types.h... dsl_cpe_linux.c: In function 'DSL_CPE_ThreadInit':
dsl_cpe_linux.c:779:25: error: assignment to 'DSL_CPE_Thread_t' {aka 'int'} from 'pthread_t' {aka 'struct __pthread *'} makes integer from pointer without a cast [-Wint-conversion]
779 | pThrCntrl->tid = tid;
| ^
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadDelete':
dsl_cpe_linux.c:862:44: error: passing argument 1 of 'pthread_cancel' makes pointer from integer without a cast [-Wint-conversion]
862 | switch(pthread_cancel(pThrCntrl->tid))
| ~~~~~~~~~^~~~~
| |
| DSL_CPE_Thread_t {aka int}
In file included from dsl_cpe_linux.h:35:
/builder/shared-workdir/build/staging_dir/toolchain-mips_mips32_gcc-14.2.0_musl/include/pthread.h:98:20: note: expected 'pthread_t' {aka 'struct __pthread *'} but argument is of type 'DSL_CPE_Thread_t' {aka 'int'}
98 | int pthread_cancel(pthread_t);
| ^~~~~~~~~
dsl_cpe_linux.c: In function 'DSL_CPE_ThreadIdGet':
dsl_cpe_linux.c:1123:11: error: returning 'pthread_t' {aka 'struct __pthread *'} from a function with return type 'DSL_CPE_Thread_t' {aka 'int'} makes integer from pointer without a cast [-Wint-conversion]
1123 | return pthread_self();
| ^~~~~~~~~~~~~~
```
While at it, fix also some additional build warnings.
Link: https://github.com/openwrt/openwrt/pull/18688
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Trying to compile EAD with now default GCC14 will fail due to now erroring
out on implicit int type as well as implicit function declarations.
Due to this, the packaged configure script will fail on the simple compiler
test as the generated test uses main loop with an implicit int type.
So, instead of patching multiple test cases in the shipped configure script
for tinysrp lets run autoreconf on it so its regenerated.
We also need to pass -Wno-error=implicit-function-declaration as there are
multiple instances of tinysrp code relying on implicit function declarations.
Link: https://github.com/openwrt/openwrt/pull/18645
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some ISPs require the client ID to be set in the DHCP and DHCPv6
requests. OpenWrt sets the client id for IPv6 but not for IPv4 by
default.
Align this behavior between DHCPv4 and DHCPv6.
ISPs that require this measure are Deutsche Glasfaser as well as some
Entega connections.
Signed-off-by: David Bauer <mail@david-bauer.net>
