openwrt-6.x/package/boot
Vladyslav Andreichykov 9c55866fad qualcommax: ipq60xx: add Linksys MR7350 support
Linksys MR7350 is a 802.11ax Dual-band router/AP.
Specifications:
* CPU: Qualcomm IPQ6000 Quad core Cortex-A53(A73) 1.5GHz
* RAM: 512MB of DDR3
* Storage: 256Mb NAND
* Ethernet: 5x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5052 2x2@80MHz or  802.11a/b/g/n/ac/ax 1201 Mbps PHY rate
* LED-s:
	* RGB system led
	* USB blue led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition:
fw_printenv -n boot_part

- Change the partition:
fw_setenv boot_part 1
or
fw_setenv boot_part 2
depending on the current partition

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin kernel

Co-Authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Co-Authored-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Vladyslav Andreichykov <vladdrako007@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14807
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-07 16:00:58 +01:00
..
apex
arm-trusted-firmware-bcm63xx
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add mt7986-spim-nand-ddr3 build 2024-11-30 18:36:05 +01:00
arm-trusted-firmware-mvebu
arm-trusted-firmware-rockchip treewide: update contact information 2024-09-11 00:37:34 +02:00
arm-trusted-firmware-stm32 arm-trusted-firmware-stm32: add ATF for stm32 boards 2024-11-23 15:53:21 +01:00
arm-trusted-firmware-sunxi
arm-trusted-firmware-tools
at91bootstrap
fconfig
grub2
imx-bootlets imx-bootlets: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
kexec-tools
kobs-ng kobs-ng: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
mt7623n-preloader
opensbi
optee-os-stm32 optee-os-stm32: add OP-TEE for stm32 boards 2024-11-23 15:53:21 +01:00
rkbin rkbin: add rk3588 support 2024-08-11 18:56:27 +02:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2024-09-24 12:29:06 +02:00
uboot-armsr
uboot-at91
uboot-ath79 uboot-ath79: refresh patches 2024-10-19 17:56:46 +02:00
uboot-bcm53xx
uboot-bcm4908
uboot-bmips
uboot-d1
uboot-envtools qualcommax: ipq60xx: add Linksys MR7350 support 2024-12-07 16:00:58 +01:00
uboot-fritz4040
uboot-imx
uboot-kirkwood uboot-kirkwood: fix compilation with GCC14 2024-09-25 22:50:09 +02:00
uboot-lantiq uboot-laniq: fix compilation with GCC14 2024-09-08 11:49:20 +02:00
uboot-layerscape uboot-layerscape: bump to lf-6.6.23-2.0.0 2024-09-22 16:21:02 +02:00
uboot-mediatek uboot-mediatek: increase USB probe delay on OpenWrt One 2024-12-02 13:55:36 +01:00
uboot-mvebu uboot-mvebu: update to version 2024.10 2024-10-19 22:54:12 +02:00
uboot-mxs
uboot-omap
uboot-rockchip uboot-rockchip: add support for NanoPi R3S 2024-10-27 14:57:51 +01:00
uboot-sifiveu
uboot-stm32 uboot-stm32: add U-Boot for stm32 boards 2024-11-23 15:53:21 +01:00
uboot-sunxi
uboot-tegra
uboot-zynq