DENG Qingfang 1b7199c90c ramips: add support for JCG JHR-AC876M ... JCG JHR-AC876M is an AC2600M router Hardware specs: SoC: MT7621AT 2.4GHz: MT7615N 4x4 @ PCIe0 5GHz: MT7615N 4x4 @ PCIe1 Flash: Winbond W25Q128JVSQ 16MiB RAM: Nanya NT5CB128M16 256MiB USB 2.0 and 3.0 ports 6 LEDs, 3 of which are connected to SoC GPIO Reset and WPS buttons Flash instructions: Stock to OpenWrt: Upload factory.bin in stock firmware's upgrade page, do not preserve settings OpenWrt to stock: Push and hold the reset button for 5s while power cycling to enter recovery mode; Visit 192.168.1.1 and upload stock firmware MAC addresses map: 0x0004 *:1c wlan2g/wan/label 0x8004 *:20 wlan5g 0xe000 *:1b lan 0xe006 *:1a not used in stock fw Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>		2019-12-13 19:43:47 +01:00
..
base-files	ramips: split further base-files across subtargets	2019-11-11 14:53:06 +01:00
dts	ramips: add support for JCG JHR-AC876M	2019-12-13 19:43:47 +01:00
files-4.14/drivers	ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random	2019-10-27 14:13:47 +01:00
image	ramips: add support for JCG JHR-AC876M	2019-12-13 19:43:47 +01:00
mt76x8	ramips: mt76x8: use flash location for wan_mac in 02_network	2019-12-12 13:11:39 +01:00
mt7620	ramips: mt7620: use flash location for wan_mac in 02_network	2019-12-12 13:11:18 +01:00
mt7621	ramips: add support for JCG JHR-AC876M	2019-12-13 19:43:47 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.158	2019-12-10 09:50:42 +01:00
rt288x	ramips: rt288x: use flash location for wan_mac in 02_network	2019-12-12 13:11:49 +01:00
rt305x	ramips: rt305x: use flash location for wan_mac in 02_network	2019-12-12 13:11:58 +01:00
rt3883	ramips: improve Samsung CY-SWR1100 support	2019-11-13 16:03:42 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00