openwrt-6.x/package/boot
Yang Xiwen 5dbf93c8c5 ipq60xx: add support for TP-Link EAP623-Outdoor HD v1
Specifications:
* SoC: Qualcomm IPQ6018 (64-bit Quad-core Arm Cortex-A53 @ 1800MHz)
* Memory: 1 GiB
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: QCN9074 (4x4 5 GHz 802.11ax)
* Wi-Fi: IPQ6018 (4x4 2.4 GHz 802.11b/g/n/ax)
* Ethernet: RTL8211F (10/100/1GBASE-T)
* Flash: ESMT F59D1G81MB (128 MiB)
* LEDs: 1x Green Status (GPIO 37 Active High), 1x Yellow Status (GPIO 32
  Active High) and an LED global control GPIO (GPIO 36 Active High, set
  up by U-Boot)
* Buttons: 1x Reset (GPIO 9 Active Low)

Installation Instructions (Serial+TFTP):
1. Solder 4 pin header to the pads near T32 and T31.
2. Connect 3V3 TTL port to TX, RX, and GND, which are pad T31, T32 and
   the pad near T31 respectively. Be sure not to connect VCC and
   crossover TX and RX.
3. Copy RAM firmware image
   openwrt-qualcommax-ipq60xx-tplink_eap623od-hd-v1-initramfs-uImage.itb
   to TFTP server root, available at 192.168.0.1.
4. Connect PoE ethernet cable to the RJ45 port and hold Ctrl+B in the
   serial console (115200 baud) until autoboot is halted.
5. Run the following commands in the U-boot prompt:
   # setenv serverip 192.168.0.1
   # setenv ipaddr 192.168.0.99
   # tftpboot 0x44000000 openwrt-qualcommax-ipq60xx-tplink_eap623od-hd-v1-initramfs-uImage.itb
   # bootm
   You may need to type Ctrl+C and Enter before running these commands
   to clear invisible characters from the buffer.
6. Run the following command in a terminal to copy the sysupgrade image
   to be installed (check IP address):
   $ scp openwrt-qualcommax-ipq60xx-tplink_eap623od-hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
7. Activate the OpenWrt serial console and run the following commands:
   # cd /tmp
   # sysupgrade -n openwrt-qualcommax-ipq60xx-tplink_eap623od-hd-v1-squashfs-sysupgrade.bin
8. The AP will reboot and OpenWrt will be successfully installed.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18389
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-04-09 09:50:31 +02:00
..
apex treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
arm-trusted-firmware-bcm63xx include/trusted-firmware-a.mk: remove the no-warn-rwx-segments hack 2024-12-22 23:48:53 +01:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: add MT7988 BL2 DDR4 images 2025-03-30 02:02:58 +01:00
arm-trusted-firmware-mvebu include/trusted-firmware-a.mk: remove the no-warn-rwx-segments hack 2024-12-22 23:48:53 +01:00
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: support rk3588 2025-04-06 14:22:19 +03:00
arm-trusted-firmware-stm32 trusted-firmware-a.mk: fix release download URL 2024-12-28 11:20:20 +01:00
arm-trusted-firmware-sunxi include/trusted-firmware-a.mk: remove the no-warn-rwx-segments hack 2024-12-22 23:48:53 +01:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: update to version 2.12 2025-02-13 03:16:40 +00:00
at91bootstrap at91bootstrap: put at91bootstrap images into image staging directory 2025-04-04 14:39:00 +02:00
fconfig
grub2 grub2: add EFI support for loongarch64 2024-05-04 14:14:24 +08:00
imx-bootlets imx-bootlets: bump to 10.12.01 2025-02-05 22:00:09 +01:00
kexec-tools kexec-tools: update URL 2025-01-29 16:56:05 +01:00
kobs-ng kobs-ng: Mark as nonshared to build in step 1 2024-07-30 21:42:33 +02:00
mt7623n-preloader
opensbi opensbi: bump to 1.6 2025-02-15 15:31:54 +01:00
optee-os-stm32 optee-os-stm32: bump to 4.4.0 2024-12-22 23:48:52 +01:00
rkbin arm-trusted-firmware-rockchip: support rk3588 2025-04-06 14:22:19 +03:00
tfa-layerscape include/trusted-firmware-a.mk: remove the no-warn-rwx-segments hack 2024-12-22 23:48:53 +01:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-10 21:50:22 +02:00
uboot-at91 at91: put u-boot images into image staging directory 2025-04-04 14:39:00 +02:00
uboot-ath79 uboot-ath79: build U-Boot/qca9558_nec_aterm for NEC Aterm WG2200HP 2025-04-07 00:42:18 +02:00
uboot-bcm53xx uboot-bcm53xx: bump to 2024.01 2024-01-20 19:38:20 +01:00
uboot-bcm4908 packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-bmips uboot-bmips: Add U-Boot for the BMIPS target 2024-05-01 21:30:32 +02:00
uboot-d1 uboot-d1: Adapt BUILD_DEVICES to renamed boards 2024-12-23 01:49:04 +01:00
uboot-fritz4040 treewide: package: update missed hashes after switch to ZSTD 2024-04-07 14:56:04 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood uboot-kirkwood: fix compilation with GCC14 2024-09-25 22:50:09 +02:00
uboot-lantiq lantiq-gphy-firmware: add package 2025-03-15 13:52:40 +01:00
uboot-layerscape uboot-layerscape: bump to lf-6.6.23-2.0.0 2024-09-22 16:21:02 +02:00
uboot-mediatek mediatek: add support for netis NX31 2025-04-06 20:14:18 +02:00
uboot-mvebu uboot-mvebu: update to version 2024.10 2024-10-19 22:54:12 +02:00
uboot-mxs packages: refresh patches 2024-05-31 11:30:06 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip arm-trusted-firmware-rockchip: support rk3588 2025-04-06 14:22:19 +03:00
uboot-sifiveu uboot-sifiveu: bump to 2023.10 2025-02-18 22:40:26 +01:00
uboot-stm32 uboot-stm32: bump to 2024.10 2024-12-22 23:48:53 +01:00
uboot-sunxi sunxi: add support for Merrii Hummingbird A31 2025-02-18 22:50:16 +01:00
uboot-tegra uboot-tegra: Set UBOOT_USE_INTREE_DTC 2024-06-02 18:06:39 +02:00
uboot-tools ipq60xx: add support for TP-Link EAP623-Outdoor HD v1 2025-04-09 09:50:31 +02:00
uboot-zynq packages: refresh patches 2024-05-31 11:30:06 +02:00