openwrt-6.x/target/linux/mediatek/dts
Tianling Shen 40e7fab9e4 mediatek: add Nokia EA0326GMP support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 128 MB SPI-NAND
  RAM: 256MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset, WPS/Mesh
  Power: DC 12V 1A

Gain SSH access:
1. Login into web interface, and download the configuration.
2. Download the configration utilities:
   https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz
     These binaries are extraced from the factory firmware, which are
     dynamically linked with aarch64 musl 1.1.24. To use them, you
     must run them under the same runtime environment, otherwise the
     binaries will not work properly!
3. Upload the configuration and utilities to a suitable environment.
4. Uncompress the utilities, move them to '/bin' and give them executable permisison:
   tar -zxf openwrt-mediatek-mt7981-nokia-ea0326gmp-config-utils.tar.gz
   mv mkconfig seama /bin
   chmod +x /bin/mkconfig
   chmod +x /bin/seama
5. Decrypt and uncompress the configuration:
     Enter fakeroot if you are not login as root.
   mkconfig -a de-enca -m EA0326GMP_3FE79221BAAA -i EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz -o backup.tar.gz
   tar -zxf backup.tar.gz
6. Edit 'etc/config/dropbear', set 'enable' to '1'.
7. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
8. Repack the configuration:
   tar -zcf backup.tar.gz etc/
   mkconfig -a enca -m EA0326GMP_3FE79221BAAA -i backup.tar.gz -o EA0326GMP_3FE79221BAAA-xxxxxxxx-backup.tar.gz
9. Upload new configuration via web interface, now you can SSH to EA0326GMP.

A minimum configuration which enabled SSH access is also provided
to simplify the process:
https://firmware.download.immortalwrt.eu.org/cnsztl/mediatek/filogic/openwrt-mediatek-mt7981-nokia-ea0326gmp-enable-ssh.tar.gz

Flash instructions:
1. SSH to EA0326GMP, backup everything, especially 'Factory' part.
2. Write new BL2:
   mtd write openwrt-mediatek-filogic-nokia_ea0326gmp-preloader.bin BL2
3. Write new FIP:
   mtd write openwrt-mediatek-filogic-nokia_ea0326gmp-bl31-uboot.fip FIP
4. Set static IP on your PC:
   IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-06-06 18:56:32 +01:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: correct address of MT753x switch IC 2024-05-09 19:43:54 +02:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: filogic: add support for Edgecore EAP111 2024-04-11 13:25:11 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: add CMCC RAX3000M support 2023-10-28 19:05:07 +02:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: filogic: prevent faulty mac address assignment 2024-05-25 12:41:26 +02:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7981b-cudy-tr3000-v1.dts mediatek: add support for Cudy TR3000 v1 2024-05-09 23:32:32 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: Cudy WR3000 v1 wps button fix 2024-02-26 11:26:22 +01:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-glinet-gl-mt2500.dts mediatek: filogic: fix nvmem cell names of the GL.iNet MT-2500 2024-02-19 03:23:43 +00:00
mt7981b-glinet-gl-mt3000.dts mediatek: use mac-base 2023-11-25 23:45:26 +01:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-jcg-q30-pro.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-nokia-ea0326gmp.dts mediatek: add Nokia EA0326GMP support 2024-06-06 18:56:32 +01:00
mt7981b-openembed-som7981.dts mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
mt7981b-openwrt-one.dts mediatek/filogic: add OpenWrt One support 2024-05-21 11:35:38 +02:00
mt7981b-qihoo-360t7.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-routerich-ax3000.dts mediatek: fixes typo for spi properties 2024-01-14 23:11:57 +00:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01-nand.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: filogic: prevent faulty mac address assignment 2024-05-25 12:41:26 +02:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-acelink-ew-7886cax.dts mediatek: filogic: add Acelink EW-7886CAX support 2023-12-05 09:06:47 +01:00
mt7986a-acer-predator-w6.dts mediatek: fix DTS defining mt7530 switch phys but not referencing them 2024-04-13 18:49:30 +01:00
mt7986a-asus-rt-ax59u.dts mediatek: filogic: asus-rt-ax59u: use NVMEM-on-UBI 2024-02-23 14:35:00 +00:00
mt7986a-asus-tuf-ax4200.dts mediatek: fix DTS defining mt7530 switch phys but not referencing them 2024-04-13 18:49:30 +01:00
mt7986a-asus-tuf-ax6000.dts mediatek: ASUS TUF-AX6000: fix phy-handle numbering 2024-05-08 22:19:09 +01:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: filogic: bpi-r3-mini: fix power on M.2 slot 2024-02-16 13:56:01 +00:00
mt7986a-glinet-gl-mt6000.dts mediatek: filogic: convert GL.iNet MT-6000 to NVMEM-on-MMC 2024-02-18 03:26:15 +00:00
mt7986a-jdcloud-re-cp-03.dts mediatek: switch to fitblk for JDCloud RE-CP-03 2024-04-30 03:28:13 +01:00
mt7986a-netcore-n60.dts mediatek: filogic: add Netcore N60 support 2024-03-29 22:54:28 +01:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7986a-zyxel-ex5700-telenor.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: remove deprecated led "label" properties 2024-01-06 00:46:15 +01:00
mt7986b-netgear-wax220.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00