Robert Marko 4488b260a0 ipq40xx: add Edgecore ECW5211 support ... This patch adds support for the Edgecore ECW5211 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ4018 ARMv7-A 4x Cortex A-7 - RAM: 256MB DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB MX35LFxGE4AB SPI-NAND - Ethernet: 2 x 1G via Q8075 PHY connected to ethernet adapter via PSGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: Built-in IPQ4018 (2x2 802.11bng, 2x2 802.11 acn) - CC2540 BLE connected to USB 2.0 port - Atmel AT97SC3205T I2C TPM Signed-off-by: Robert Marko <robert.marko@sartura.hr>		2020-09-17 08:43:03 +02:00
..
base-files	base-files: drop default setup for vconfig	2020-09-16 17:28:20 +02:00
boot	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
devel	strace: Update to version 5.8	2020-08-31 22:15:26 +02:00
firmware	ipq40xx: add Edgecore ECW5211 support	2020-09-17 08:43:03 +02:00
kernel	mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limited	2020-09-16 18:49:11 +02:00
libs	wolfssl: Activate link time optimization (LTO)	2020-09-06 20:30:51 +02:00
network	uhttpd: update to the latest master	2020-09-15 13:45:33 +02:00
system	rpcd: update to the latest master	2020-09-10 13:35:05 +02:00
utils	util-linux: Fix build when libmagic is present	2020-09-06 23:19:12 +02:00
Makefile	build: store SourceDateEpoch in manifest	2020-08-31 11:18:06 +01:00