openwrt-6.x/target/linux/ramips
David DeGraw 75403dd1d0 ramips: add support for Cudy R700
This is the same hardware as the Cudy WR2100 that's
had support for some time now, just without the WLAN
hardware.

This PR is mostly copied from the commit that added
support for the WR2100, here: 3501db9

Specifications:
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 5x Gbit ports

Installation:
There are two known options:

The Luci-based UI.
Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.

Both options require a signed firmware binary.
A signed firmware can be found in GitHub PR #18532.

R4 & R5 need to be shorted (0-100Ω) for the UART to work.

Link: https://github.com/openwrt/openwrt/pull/18532

Signed-off-by: David DeGraw <degraw@fastmail.com>
2025-05-10 21:26:08 +02:00
..
base-files/etc
dts ramips: add support for Cudy R700 2025-05-10 21:26:08 +02:00
files/drivers ramips: update drivers to be compatible with kernel 6.12 2025-05-07 00:40:05 +02:00
image ramips: add support for Cudy R700 2025-05-10 21:26:08 +02:00
mt76x8 ramips: Add support for Xiaomi MiWiFi 3A 2025-04-20 21:50:22 +02:00
mt7620 ramips: mt7620: Add support for the devolo WiFi Repeater ac (MT 2767, 2779) 2025-04-22 22:06:28 +02:00
mt7621 ramips: add support for Cudy R700 2025-05-10 21:26:08 +02:00
patches-6.6 ramips: add Semtech SX9512 touch input driver 2025-05-10 21:26:08 +02:00
rt288x ramips: rt288x: mark subtarget as source-only 2025-05-09 11:31:20 +02:00
rt305x kernel: Activate CONFIG_NET_SWITCHDEV in generic config 2025-03-15 13:54:59 +01:00
rt3883 kernel: Activate CONFIG_NET_SWITCHDEV in generic config 2025-03-15 13:54:59 +01:00
Makefile ramips: switch to Linux 6.6 2024-05-03 21:36:42 +01:00
modules.mk ramips: add Semtech SX9512 touch input driver 2025-05-10 21:26:08 +02:00