mirror of
https://github.com/LiBwrt-op/openwrt-6.x.git
synced 2026-01-08 12:14:47 +00:00
4ebcc5375a
Hardware spec: - Rockchip RK3568 Quad-core ARM Cortex-A55 CPU 2GHz - GPU Mali-G52 1-Core-2EE OpenGL ES3.2 Vu1kn 1.1 OpenCL 2.0 - Memory2G DDR3 SDRAM (option 4G) - Storage Onboard 16GB eMMC Flash, Micro SD-Card slot, SATA 3.0 Port,SPI flash - Network 5 x 10/100/1000 Mbit/s Ethernet MT7531 - Display 1 HDMI port, 2 DSI interface(1 DSI can change to LVDS by software) - Camera 1 CSI camera interface - Audio Output HDMI & I2S & Speaker & Headphone - USB port USB 3.0 PORT (x2), micro USB OTG (x1) - PCIE 1 mini pcie interface & 1 M.2 key-e interface - Remote IR Receiver (x1) - GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). - Switches Reset button, Power button, U-boot button - LED Power Status - Power Source 12 volt 2A via DC Power Installation: Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*) Boot from the SD card 1-hold down the MaskRom button 2-Connect DC power 3-Wait 5 seconds, release the button. eMMC Installation: 1-Uncompress the OpenWrt sysupgrade image 2-fash to eMMC dd if=openwrt-rockchip-armv8-sinovoip_bpi-r2-pro-squashfs-sysupgrade.img of=/dev/mmcblk1 sync 3-remove SD card reboot Signed-off-by: Antonio Flores <antflores627@gmail.com> |
||
|---|---|---|
| .. | ||
| airoha | ||
| apm821xx | ||
| archs38 | ||
| armsr | ||
| at91 | ||
| ath79 | ||
| bcm27xx | ||
| bcm47xx | ||
| bcm53xx | ||
| bcm4908 | ||
| bmips | ||
| d1 | ||
| gemini | ||
| generic | ||
| imx | ||
| ipq40xx | ||
| ipq806x | ||
| ixp4xx | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| loongarch64 | ||
| malta | ||
| mediatek | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| octeontx | ||
| omap | ||
| pistachio | ||
| qoriq | ||
| qualcommax | ||
| ramips | ||
| realtek | ||
| rockchip | ||
| sifiveu | ||
| starfive | ||
| sunxi | ||
| tegra | ||
| uml | ||
| x86 | ||
| zynq | ||
| Makefile | ||