Ptilopsis Leucotis 57efdd6a2d ath79: fix I2C on GL-AR300M devices ... On GL-AR300M Series GPIO17 described as I2C SDA in Device Tree. Because of GPIO_OUT_FUNCTION4 register was not initialized on start, GPIO17 was uncontrollable, it always in high state. According to QCA9531 documentation, default setting of GPIO17 is SYS_RST_L. In order to make GPIO17 controllable, it should write value 0x00 on bits [15:8] of GPIO_OUT_FUNCTION4 register, located at 0x1804003C address. Signed-off-by: Ptilopsis Leucotis <PtilopsisLeucotis@yandex.com>		2022-05-15 16:06:20 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: migrate Archer C5 5GHz radio device paths	2022-03-31 18:07:29 +02:00
dts	ath79: fix I2C on GL-AR300M devices	2022-05-15 16:06:20 +02:00
files	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
generic	ath79: add Netgear WNDAP360	2022-04-30 23:56:47 +02:00
image	ath79: add Netgear WNDAP360	2022-04-30 23:56:47 +02:00
mikrotik	ath79: add support for MikroTik RouterBOARD wAP-2nD (wAP)	2022-04-18 07:24:09 +02:00
nand	ath79: nand: add 5.15 support for nand subtarget	2022-04-13 12:00:22 +02:00
patches-5.10	kernel: bump 5.10 to 5.10.113	2022-04-30 21:27:45 +02:00
patches-5.15	kernel: bump 5.15 to 5.15.38	2022-05-09 20:49:50 +01:00
tiny	ath79: Move TPLink WPA8630Pv2 to ath79-tiny target	2022-04-09 19:31:46 +02:00
config-5.10	ath79: add support for reset key on MikroTik RB912UAG-2HPnD	2022-01-19 16:40:12 +01:00
config-5.15	kernel: move some symbols to generic config	2022-04-09 19:31:46 +02:00
Makefile	ath79: switch to Kernel 5.10	2021-12-21 21:38:52 +01:00
modules.mk