David DeGraw 75403dd1d0 ramips: add support for Cudy R700 ... This is the same hardware as the Cudy WR2100 that's had support for some time now, just without the WLAN hardware. This PR is mostly copied from the commit that added support for the WR2100, here: 3501db9 Specifications: SoC: MT7621 CPU: 880 MHz Flash: 16 MiB RAM: 128 MiB Ethernet: 5x Gbit ports Installation: There are two known options: The Luci-based UI. Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. A signed firmware can be found in GitHub PR #18532. R4 & R5 need to be shorted (0-100Ω) for the UART to work. Link: https://github.com/openwrt/openwrt/pull/18532 Signed-off-by: David DeGraw <degraw@fastmail.com>		2025-05-10 21:26:08 +02:00
..
board.d	ramips: add support for Cudy R700	2025-05-10 21:26:08 +02:00
hotplug.d	ramips: fix reading mac address for hiwifi hc5962	2025-03-08 20:12:11 +01:00
init.d	ramips: add support for Zyxel LTE7490-M904	2025-03-15 13:39:41 +01:00
rc.button	ramips: enable LED button for TP-Link EC330-G5u v1	2023-06-08 17:25:22 +02:00
uci-defaults	ramips: add support for Buffalo WSR-2533DHPL2	2024-06-05 21:14:16 +02:00