him411/openwrt-6.x
1
0
Fork 0
mirror of https://github.com/LiBwrt-op/openwrt-6.x.git synced 2025-12-16 16:57:28 +00:00
Code Issues Packages Projects Releases Wiki Activity
8e15e35e87
openwrt-6.x/target/linux/airoha/patches-6.12/029-03-spi-airoha-add-support-of-dual-quad-wires-spi-mod.patch
Mikhail Kshevetskiy 5ff0e70930 airoha: spi: snfi driver fixes & improvements 
This patch series greatly improve airoha snfi driver and fix a
number of serious bugs.

Fixed bugs:
 * Fix reading/writing of flashes with more than one plane per lun
 * Fill the buffer with 0xff before writing
 * Fix reading of flashes supporting continuous reading mode
 * Fix error paths

Improvements:
 * Add support of dual/quad wires spi modes in exec_op(). This also
   fix flash reading/writing if dirmap can't be created.
 * Support of dualio/quadio flash reading commands

Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20295
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-10-09 16:37:25 +02:00

210 lines
6.2 KiB
Diff
Raw Blame History

From 703b10241666b468484a6ec5eb5c7c71fb2463ef Mon Sep 17 00:00:00 2001
From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Date: Sat, 7 Jun 2025 09:09:38 +0300
Subject: [PATCH v6 03/13] spi: airoha: add support of dual/quad wires spi
modes to exec_op() handler
Booting without this patch and disabled dirmap support results in
[ 2.980719] spi-nand spi0.0: Micron SPI NAND was found.
[ 2.986040] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[ 2.994709] 2 fixed-partitions partitions found on MTD device spi0.0
[ 3.001075] Creating 2 MTD partitions on "spi0.0":
[ 3.005862] 0x000000000000-0x000000020000 : "bl2"
[ 3.011272] 0x000000020000-0x000010000000 : "ubi"
...
[ 6.195594] ubi0: attaching mtd1
[ 13.338398] ubi0: scanning is finished
[ 13.342188] ubi0 error: ubi_read_volume_table: the layout volume was not found
[ 13.349784] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
[ 13.356897] UBI error: cannot attach mtd1
If dirmap is disabled or not supported in the spi driver, the dirmap requests
will be executed via exec_op() handler. Thus, if the hardware supports
dual/quad spi modes, then corresponding requests will be sent to exec_op()
handler. Current driver does not support such requests, so error is arrised.
As result the flash can't be read/write.
This patch adds support of dual and quad wires spi modes to exec_op() handler.
Fixes: a403997c12019 ("spi: airoha: add SPI-NAND Flash controller driver")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/spi/spi-airoha-snfi.c | 108 ++++++++++++++++++++++++++--------
1 file changed, 82 insertions(+), 26 deletions(-)
--- a/drivers/spi/spi-airoha-snfi.c
+++ b/drivers/spi/spi-airoha-snfi.c
@@ -192,6 +192,14 @@
#define SPI_NAND_OP_RESET 0xff
#define SPI_NAND_OP_DIE_SELECT 0xc2
+/* SNAND FIFO commands */
+#define SNAND_FIFO_TX_BUSWIDTH_SINGLE 0x08
+#define SNAND_FIFO_TX_BUSWIDTH_DUAL 0x09
+#define SNAND_FIFO_TX_BUSWIDTH_QUAD 0x0a
+#define SNAND_FIFO_RX_BUSWIDTH_SINGLE 0x0c
+#define SNAND_FIFO_RX_BUSWIDTH_DUAL 0x0e
+#define SNAND_FIFO_RX_BUSWIDTH_QUAD 0x0f
+
#define SPI_NAND_CACHE_SIZE (SZ_4K + SZ_256)
#define SPI_MAX_TRANSFER_SIZE 511
@@ -387,10 +395,26 @@ static int airoha_snand_set_mode(struct
return regmap_write(as_ctrl->regmap_ctrl, REG_SPI_CTRL_DUMMY, 0);
}
-static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl, u8 cmd,
- const u8 *data, int len)
+static int airoha_snand_write_data(struct airoha_snand_ctrl *as_ctrl,
+ const u8 *data, int len, int buswidth)
{
int i, data_len;
+ u8 cmd;
+
+ switch (buswidth) {
+ case 0:
+ case 1:
+ cmd = SNAND_FIFO_TX_BUSWIDTH_SINGLE;
+ break;
+ case 2:
+ cmd = SNAND_FIFO_TX_BUSWIDTH_DUAL;
+ break;
+ case 4:
+ cmd = SNAND_FIFO_TX_BUSWIDTH_QUAD;
+ break;
+ default:
+ return -EINVAL;
+ }
for (i = 0; i < len; i += data_len) {
int err;
@@ -409,16 +433,32 @@ static int airoha_snand_write_data(struc
return 0;
}
-static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl, u8 *data,
- int len)
+static int airoha_snand_read_data(struct airoha_snand_ctrl *as_ctrl,
+ u8 *data, int len, int buswidth)
{
int i, data_len;
+ u8 cmd;
+
+ switch (buswidth) {
+ case 0:
+ case 1:
+ cmd = SNAND_FIFO_RX_BUSWIDTH_SINGLE;
+ break;
+ case 2:
+ cmd = SNAND_FIFO_RX_BUSWIDTH_DUAL;
+ break;
+ case 4:
+ cmd = SNAND_FIFO_RX_BUSWIDTH_QUAD;
+ break;
+ default:
+ return -EINVAL;
+ }
for (i = 0; i < len; i += data_len) {
int err;
data_len = min(len - i, SPI_MAX_TRANSFER_SIZE);
- err = airoha_snand_set_fifo_op(as_ctrl, 0xc, data_len);
+ err = airoha_snand_set_fifo_op(as_ctrl, cmd, data_len);
if (err)
return err;
@@ -895,12 +935,28 @@ error_dma_unmap:
static int airoha_snand_exec_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
- u8 data[8], cmd, opcode = op->cmd.opcode;
struct airoha_snand_ctrl *as_ctrl;
+ int op_len, addr_len, dummy_len;
+ u8 buf[20], *data;
int i, err;
as_ctrl = spi_controller_get_devdata(mem->spi->controller);
+ op_len = op->cmd.nbytes;
+ addr_len = op->addr.nbytes;
+ dummy_len = op->dummy.nbytes;
+
+ if (op_len + dummy_len + addr_len > sizeof(buf))
+ return -EIO;
+
+ data = buf;
+ for (i = 0; i < op_len; i++)
+ *data++ = op->cmd.opcode >> (8 * (op_len - i - 1));
+ for (i = 0; i < addr_len; i++)
+ *data++ = op->addr.val >> (8 * (addr_len - i - 1));
+ for (i = 0; i < dummy_len; i++)
+ *data++ = 0xff;
+
/* switch to manual mode */
err = airoha_snand_set_mode(as_ctrl, SPI_MODE_MANUAL);
if (err < 0)
@@ -911,40 +967,40 @@ static int airoha_snand_exec_op(struct s
return err;
/* opcode */
- err = airoha_snand_write_data(as_ctrl, 0x8, &opcode, sizeof(opcode));
+ data = buf;
+ err = airoha_snand_write_data(as_ctrl, data, op_len,
+ op->cmd.buswidth);
if (err)
return err;
/* addr part */
- cmd = opcode == SPI_NAND_OP_GET_FEATURE ? 0x11 : 0x8;
- put_unaligned_be64(op->addr.val, data);
-
- for (i = ARRAY_SIZE(data) - op->addr.nbytes;
- i < ARRAY_SIZE(data); i++) {
- err = airoha_snand_write_data(as_ctrl, cmd, &data[i],
- sizeof(data[0]));
+ data += op_len;
+ if (addr_len) {
+ err = airoha_snand_write_data(as_ctrl, data, addr_len,
+ op->addr.buswidth);
if (err)
return err;
}
/* dummy */
- data[0] = 0xff;
- for (i = 0; i < op->dummy.nbytes; i++) {
- err = airoha_snand_write_data(as_ctrl, 0x8, &data[0],
- sizeof(data[0]));
+ data += addr_len;
+ if (dummy_len) {
+ err = airoha_snand_write_data(as_ctrl, data, dummy_len,
+ op->dummy.buswidth);
if (err)
return err;
}
/* data */
- if (op->data.dir == SPI_MEM_DATA_IN) {
- err = airoha_snand_read_data(as_ctrl, op->data.buf.in,
- op->data.nbytes);
- if (err)
- return err;
- } else {
- err = airoha_snand_write_data(as_ctrl, 0x8, op->data.buf.out,
- op->data.nbytes);
+ if (op->data.nbytes) {
+ if (op->data.dir == SPI_MEM_DATA_IN)
+ err = airoha_snand_read_data(as_ctrl, op->data.buf.in,
+ op->data.nbytes,
+ op->data.buswidth);
+ else
+ err = airoha_snand_write_data(as_ctrl, op->data.buf.out,
+ op->data.nbytes,
+ op->data.buswidth);
if (err)
return err;
}
Reference in New Issue View Git Blame Copy Permalink