Patricia Lee 907e9e0bd3 mediatek: add support for Cetron CT3003 ... **Hardware specification:** - SoC: MediaTek MT7981B 2x A53 - Flash: ESMT F50L1G41LB 128MB - RAM: Nanya NT5CC128M16JR-EK 256MB - Ethernet: 4 x 10/100/1000 Mbps - Switch: MediaTek MT7531AE - WiFi: MediaTek MT7976C - Button: Reset, Mesh - Power: DC 12V 1A - UART: 3.3v, 115200n8 | Layout: | | :-------- | | <Antenna> | | VCC | | GND | | Tx | | Rx | **Flash instructions:** 1. Rename `openwrt-mediatek-filogic-cetron_ct3003-squashfs-factory.bin` to `factory.bin`. 2. Upload the `factory.bin` using the device's Web interface. 3. Click the upgrade button and wait for the process to finish. 4. Access the OpenWrt interface using the same password. 5. Use the 'Restore' function to reset the firmware to its initial state. **Notes:** If you plan to recovery the stock firmware in the future, it's advisable to connect the device via the serial port and enter failsafe mode to back up all the MTD partitions before proceeding the steps above. Signed-off-by: Patricia Lee <patricialee320@gmail.com>		2023-09-08 23:17:26 +02:00
..
airoha
apm821xx
archs38
armsr
at91
ath25
ath79	ath79: use kernel 6.1 as default	2023-09-08 21:00:26 +02:00
bcm27xx
bcm47xx
bcm53xx
bcm63xx
bcm4908
bmips
gemini
generic	kernel: bump 5.15 to 5.15.131	2023-09-08 21:24:48 +02:00
imx
ipq40xx
ipq806x
kirkwood
lantiq
layerscape
malta
mediatek	mediatek: add support for Cetron CT3003	2023-09-08 23:17:26 +02:00
mpc85xx
mvebu
mxs
octeon
octeontx
omap
oxnas
pistachio
qoriq
qualcommax
ramips	kernel: bump 5.15 to 5.15.131	2023-09-08 21:24:48 +02:00
realtek
rockchip
sifiveu
sunxi
tegra
uml
x86
zynq
Makefile