Michael Lyle 961e01fc67 ramips: gl-mt1300: downclock SPI to 50MHz ... The SPI max frequency was set to 80MHz, considerably higher than the vendor clocks it in their firmware (10MHz). Multiple users reported jffs2 corruption/instability in GitHub issue #10461. My unit has a W25Q256; datasheet specifies maximum SPI frequency for read command of 50MHz. Thanks to @DragonBlueP for suggesting to eliminate m25p,fast-read; and @MPannen1979 for identifying the problem. Fixes: #10461 Signed-off-by: Michael Lyle <mlyle@lyle.org>		2022-11-07 12:54:31 +01:00
..
base-files/etc
dts	ramips: gl-mt1300: downclock SPI to 50MHz	2022-11-07 12:54:31 +01:00
files/drivers	ramips: ethernet: ralink: add led_source dts-binding	2022-05-01 13:40:13 +09:00
image	ramips: add support for TP-Link MR600 V2(EU)	2022-11-05 23:13:16 +01:00
mt76x8	ramips: add missing WAN LED for Xiaomi Mi Router 4A / 4C	2022-10-23 23:33:22 +02:00
mt7620	ramips: add support for Youku X2	2022-11-05 21:12:24 +01:00
mt7621	ramips: add support for TP-Link MR600 V2(EU)	2022-11-05 23:13:16 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.153	2022-11-05 16:26:00 +01:00
patches-5.15	kernel: bump 5.15 to 5.15.77	2022-11-05 16:26:38 +01:00
rt288x	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
rt305x	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
rt3883	kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config	2022-10-21 13:47:01 +02:00
Makefile	ramips: add linux 5.15 support for mt7621	2022-03-27 21:36:40 +02:00
modules.mk