openwrt-6.x/target/linux
Sheng Huang 985af21123 ramips: add support for JDCloud RE-CP-02
- Soc: MediaTek MT7621AT
- RAM: 512 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7905DAN, MediaTek MT7975DN
- Ethernet: 1 WAN, 3 LAN (Gigabit)
- Buttons: Reset, Joylink
- LEDs: (red, blue, green), routed to one indicator in the top of the
  device
- Power: DC 12V 1A tip positive
- 1 TF Card Slot

The pins for the serial console are already labeled on the board
J4(V, R, T, G). Serial settings: 3.3V, 115200

MAC addresses:

|         | MAC               | Algorithm |
| ------- | ----------------- | --------- |
| label   | dc:d8:xx:xx:xx:01 | label     |
| LAN     | dc:d8:xx:xx:xx:01 | label     |
| WAN     | dc:d8:xx:xx:xx:02 | label+1   |
| WLAN 2g | dc:d8:xx:xx:xx:03 | label+2   |
| WLAN 5g | de:d8:xx:xx:xx:04 | label+3   |

1. rename the
   openwrt-ramips-mt7621-jdcloud_re-cp-02-squashfs-sysupgrade.bin
   to JDCOS.bin

2. start a TFTP server from IP address 192.168.68.10 and serve the
   image named JDCOS.bin

3. connect your device to the LAN port

4. power up the router and press any key on the console to interrupt
   the boot process.

5. enter the following commands on the router console

   1. setenv bootcount 6

   2. saveenv

   3. reset

      > NOTE: wait for the restart, it will automatically fetch the
      > image named JDCOS.bin from the TFTP server and write it into
      > the flash. After the writing is completed, the router will be
      > automatically restarted.

Unable to recognize large-capacity TF card, see #14042. But the patch
https://github.com/openwrt/openwrt/issues/14042#issuecomment-1910769942
works

Co-Authored-By: Jianti Chen <clbcjt@outlook.com>
Signed-off-by: Sheng Huang <shenghuang147@gmail.com>
2024-05-11 17:24:10 +02:00
..
airoha
apm821xx
archs38
armsr armsr: armv8: enable serial console for Renesas platforms 2024-05-07 13:01:20 +01:00
at91 at91: 5.15: remove old config and patch files 2024-04-28 17:50:37 +02:00
ath79 uboot-envtools: ath79: remove env config for Senao Loader devices 2024-05-11 16:57:28 +02:00
bcm27xx bcm27xx: correct cmdline.txt consoles for procd 2024-05-01 20:22:42 +02:00
bcm47xx
bcm53xx kernel: bump 6.1 to 6.1.89 2024-04-30 20:18:15 +02:00
bcm4908 bcm4908: set kernel 6.6 as a testing version 2024-04-27 12:14:00 +02:00
bmips bmips: Build U-Boot into the XG6846 target 2024-05-01 21:32:23 +02:00
d1 d1: define subtarget specifically 2024-04-08 21:52:51 +02:00
gemini gemini: Bump to kernel v6.6 2024-05-08 16:57:32 +02:00
generic kernel: add missing kernel 6.6 symbols 2024-05-10 21:02:24 +02:00
imx
ipq40xx ipq40xx: wpj419: use existing label for SPI node 2024-05-09 10:11:44 +02:00
ipq806x ipq806x: swap lan leds for Meraki MR52 2024-05-07 13:35:49 +02:00
ixp4xx
kirkwood kernel: move mv88e6xxx fix to generic backports 2024-04-26 19:56:19 +03:00
lantiq kernel: bump 5.15 to 5.15.155 2024-04-16 23:11:25 +02:00
layerscape
loongarch64 loongarch64: new target 2024-05-04 14:14:16 +08:00
malta malta: refresh kernel 6.6 configuration 2024-04-29 00:24:02 +02:00
mediatek mediatek: filogic: add support for Cudy M3000 v1 2024-05-11 17:18:51 +02:00
mpc85xx mpc85xx: convert WS-AP3710i to simpleImage wrapper 2024-04-29 03:18:54 +02:00
mvebu kernel: bump 6.1 to 6.1.89 2024-04-30 20:18:15 +02:00
mxs mxs: drop 6.1 support 2024-04-25 14:33:22 +02:00
octeon
octeontx kernel: bump 5.15 to 5.15.155 2024-04-16 23:11:25 +02:00
omap
pistachio pistachio: 6.1: refresh kernel patches 2024-04-22 11:27:05 +02:00
qoriq qoriq: add kernel 6.1 support 2024-04-18 00:30:03 +03:00
qualcommax qualcommax: ipq807x: uboot-envtools: yuncore ax880 2024-04-30 13:51:15 +02:00
ramips ramips: add support for JDCloud RE-CP-02 2024-05-11 17:24:10 +02:00
realtek realtek: Trap LLDP packets to the CPU 2024-05-10 16:03:51 +02:00
rockchip rockchip: switch to kernel 6.6 2024-05-09 10:43:37 +02:00
sifiveu sifiveu: drop 6.1 support 2024-04-30 11:02:48 +02:00
starfive
sunxi sunxi: add support for Lichee Pi Zero Dock (V3s) board 2024-05-04 00:41:02 +02:00
tegra
uml
x86 x86: generic: config-6.6: add/remove default syms 2024-05-05 21:22:31 +02:00
zynq zynq: 5.15: remove files 2024-05-01 10:26:41 +02:00
Makefile