Sander Vanheule 807074309d realtek: add PoE enable line to Netgear GS110TPP ... By switching to the new RTL8231 driver in commit b7af54d5c1 ("realtek: Simple conversions to RTL8231 MFD driver"), the bootloader state of the RTL8231's pins is now maintained. As the bootloader de-asserts the PoE enable signal, this means PoE output is no longer available. Add a gpio-hog with high output, restoring the line value from when the pin was configured (by default) as an input with a pull-up resistor. This will hard-enable the PoE output, but the individual ports can still be administratively disabled by realtek-poe or a similar tool. Signed-off-by: Sander Vanheule <sander@svanheule.net>		2025-01-28 20:59:04 +01:00
..
base-files	realtek: Split Zyxel GS1900-8 into v1 and v2	2025-01-25 15:07:13 +01:00
dts	realtek: add PoE enable line to Netgear GS110TPP	2025-01-28 20:59:04 +01:00
files/firmware/rtl838x_phy
files-6.6	realtek: suppress debug messages of RTL930x SerDes in PHY driver	2025-01-21 18:37:51 +01:00
image	realtek: Split Zyxel GS1900-8 into v1 and v2	2025-01-25 15:07:13 +01:00
patches-6.6	realtek: Update aux-mdio driver	2025-01-18 13:28:44 +01:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
rtl838x	realtek: rtl838x: Enable MDIO_GPIO driver	2025-01-25 15:06:03 +01:00
rtl839x	realtek: rtl839x: Enable RTL8231 MFD driver	2025-01-18 14:14:52 +01:00
rtl930x	realtek: rtl930x: enable rtl8231-related drivers	2025-01-21 18:37:51 +01:00
rtl931x	realtek: Add pinctrl support for RTL8231	2025-01-07 14:36:34 +01:00
Makefile	realtek: trim default package selection	2025-01-04 20:35:48 +01:00