mirror of
https://github.com/LiBwrt-op/openwrt-6.x.git
synced 2026-01-04 10:08:03 +00:00
ca7324134d
Ruckus R500 datasheet: https://webresources.ruckuswireless.com/datasheets/r500/ds-ruckus-r500.html Specifications: SoC: 720Mhz QCA9558 RAM: 256MB Storage: 64MB of FLASH (SPI NOR - S25FL512S) 1x AR8327 GB switch Ethernet: 1x1000M port #3 on AR8327, 1x1000M (802.3at POE), port #5 on AR8327 Wireless: QCA988X HW2.0 802.11ac AR9550 2.4GHz 802.11b/g/n 5x GPIO LED 1x GPIO Reset Button 1x DC Jack 12v 1x UART, 3.3v, 115200 1x TPM, SLB9645TT12 2x Beamforming antennas configured via 74LV164 MAC addresses: 1. art 0x807E | Factory bridged | f0:3e:90:XX:XX:80 | 2. art 0x66 | eth0 | f0:3e:90:XX:XX:83 | (port 5, cpu port 6) - PoE port 3. art 0x6c | eth1 | f0:3e:90:XX:XX:84 | (port 3, cpu port 0) - non PoE port Serial console: 115200-8-N-1 on internal H4 header. Pinout: H1 ----------- |1|x|3|4|5| ----------- Pin 1 is near the "H4" marking. 1 - RX x - no pin 3 - VCC (3.3V) 4 - GND 5 - TX JTAG: Connector H2, similar to MIPS eJTAG, standard, unpoulated. H9 ---------------------- |2 |4 |6 |8 |10|12|14| ---------------------- |1 |3 |5 |7 |9 |11|13| ---------------------- 3 - TDI 5 - TDO 7 - TMS 9 - TCK 2,4,6,8,10 - GND 14 - Vref 1,11,12,13 - Not connected I²C: connector H2, near power LED, unpopulated: ------ |1|2|3 ------ H2 1 - SCL 2 - SDA 3 - GND Installation: Serial Port/TFTP 1. Setup tftp server on the local network 2. Connect to UART with TTL 3. Interupt U-boot process with Ctrl-C 4. Setup appropriate ipaddr and serverip in setenv: - setenv ipaddr 192.168.1.1 - setenv serverip 192.168.1.2 5. On TFTP Server - copy openwrt-ath79-generic-ruckus_r500-initramfs-kernel.bin to /srv/tftp 6. On R500 boot into initrd image - tftpboot 0x81000000 openwrt-ath79-generic-ruckus_r500-initramfs-kernel.bin - bootm 0x81000000 7. On TFTP server - scp -O openwrt-ath79-generic-ruckus_r500-squashfs-sysupgrade.bin root@192.168.1.1:/tmp 8. Ensure the boot command is set before flashing the image: fw_setenv bootcmd 'bootm 0xbf1c0000' 9. On R500 - sysupgrade /tmp/openwrt-ath79-generic-ruckus_r500-squashfs-sysupgrade.bin 10. If not done in 8; set boot command from U-boot shell itself: - setenv bootcmd bootm 0xbf1c0000 - saveenv - reset This patch adapted from https://github.com/victhor393/openwrt-ruckus-r500/tree/ruckus-r500-master Signed-off-by: Damien Mascord <tusker@tusker.org> - Heavily refactored the device tree - Extended commit message - Documented onboad connectors - Refactored MAC and calibration data setups to use nvmem-layout - Made both network interfaces LAN ports and bridge them, this makes more sense for an access point and is consistent with the rest of Ruckus APs. - Enable lzma-loader for compressed initramfs - Enabled the optional internal USB port - Added missing LEDs and according pinctrl settings - Added reserved memory region used for bootloader communication - Added the bit-banged I²C bus and onboard TPM - Refactored boot scheme and flash layout to match earlier Ruckus devices and maximize usable space for user data. Quirks: - H7 is the physical presence switch for the SLB9645TT12 TPM. TODO: - Link state reporting on the Ethernet ports doesn't work and both ports report "up" due to limitation of swconfig ar8327 driver. With DSA conversion, this shall be rectified. - Locate 2nd shift register (U7) controlling beamforming antennas, probably on ath10k GPIOs which are currently unsupported in the driver. For this, there is a device tree node describing that - but explicitly disabled. - At the moment of adding support, there is an endianness bug in the TPM driver causing it to not detect the TPM module because of ID mismatch. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://github.com/openwrt/openwrt/pull/17550 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| bin | ||
| lzma-loader | ||
| common-buffalo.mk | ||
| common-mikrotik.mk | ||
| common-nec.mk | ||
| common-netgear.mk | ||
| common-senao.mk | ||
| common-tp-link.mk | ||
| common-ubnt.mk | ||
| common-yuncore.mk | ||
| generic-tp-link.mk | ||
| generic-ubnt.mk | ||
| generic.mk | ||
| Makefile | ||
| mikrotik.mk | ||
| nand.mk | ||
| tiny-netgear.mk | ||
| tiny-tp-link.mk | ||
| tiny-ubnt.mk | ||
| tiny.mk | ||