Ivaylo Ivanov 6afc355b2e ramips: Add support for D-Link DIR-3060 A1 ... Hardware specification: SoC: MediaTek MT7621AT Flash: Winbond W29N01HVSINA 128MB RAM: Micron MT41K128M16JT-125 256MB Ethernet: 4x 10/100/1000 Mbps WiFi1: MT7615DN 2.4GHz N 2x2:2 WiFi2: MT7615DN 5GHz AC 2x2:2 WiFi3: MT7615N 5GHz AC 4x4:4 Button: WPS, Reset Flash instructions: OpenWrt can be installed via D-Link Recovery GUI: Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. Give it ~30 seconds, to boot the recovery mode GUI Connect your client computer to LAN1 of the device Set your client IP address manually to 192.168.0.2 / 255.255.255.0. Call the recovery page for the device at http://192.168.0.1/ Use the provided emergency web GUI to upload and flash a new firmware to the device Signed-off-by: Ivaylo Ivanov <iivailo@mail.bg>		2022-11-13 22:36:06 +01:00
..
iodata.sh	ramips: mt7621: use preferred logic in lib/upgrade/iodata.sh	2021-02-07 21:58:51 +01:00
platform.sh	ramips: Add support for D-Link DIR-3060 A1	2022-11-13 22:36:06 +01:00
ubnt.sh