Peter Lundkvist 781ad46206 ath79: add support for TP-Link RE450 v2 ... TP-Link RE450 v2 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB (needs unmounted R64 & R69 0201 resistors/jumpers) Flash instruction: Apply factory image in OEM firmware web-gui. U-Boot does not seem to have any recovery functions, so debricking requires connection via UART. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com>		2018-07-02 07:05:33 +02:00
..
base-files	ath79: add support for TP-Link RE450 v2	2018-07-02 07:05:33 +02:00
dts	ath79: add support for TP-Link RE450 v2	2018-07-02 07:05:33 +02:00
files	ath79: fix rx ring buffer stall qca956x	2018-06-18 18:21:20 +02:00
generic	ath79: add AVM FRITZ!WLAN Repeater 300E	2018-05-17 07:40:19 +02:00
image	ath79: add support for TP-Link RE450 v2	2018-07-02 07:05:33 +02:00
nand	ath79: add initial nand support for gl-ar300m	2018-06-18 20:29:38 +02:00
patches-4.14	treewide: gpio-export: add error handling	2018-06-28 18:39:57 +02:00
tiny	ath79: add tiny subtarget	2018-06-01 08:22:38 +02:00
config-4.14	ath79: add tl-wr2543-v1 support	2018-06-26 08:57:26 +02:00
Makefile	ath79: add initial nand support for gl-ar300m	2018-06-18 20:29:38 +02:00
modules.mk