f29bc8736a
CREALITY BOX WB01 is small footprint router based on MediaTek MT7688, is a device intended to interface Creality brand 3D printers to a cloud service. Specifications: - SoC: MediaTek MT7688AN @ 580MHz - RAM: DDR2 128M (Winbond W971GG6SB-25) - Flash: BoyaMicro BY25Q128AS (16 MiB, SPI NOR) handled by BoHong bh25q128as driver - WiFi: 2.4GHz 1T1R internal panel antenna - Ethernet: 1x LAN (10/100) - USB: 2x USB2.0 port (Genesys Logic GL850G 2 port USB 2.0 hub) - UART: 3.3V, TX, RX, GND / 56700 8N1 / only pads on PCB - microSD SD-XC Class 10 slot - micro USB input (for power only) - reset button - FCC ID: 2AXH6CREALITY-BOX MAC addresses as verified by OEM firmware: vendor OpenWrt source LAN eth0 factory 0x2e 2.4GHz phy0-ap0 factory 0x04 (label) LEDs color vendor OpenWRT configurable red SD card activity - yes green Cloud connectivity status yes blue LAN activity eth0 yes yellow WIFI activity phy0tpt yes Return to OEM & debrick - download "cxsw_update.tar.bz2" from manufacturer site - extract archive to FAT32 USB stick root - put USB stick in USB2 port - press & hold reset button - power on device while holding reset - wait approx 10 sec - release reset button Installation with SD Card - power on device - wait for device to finish starting - copy "openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2" to root of FAT32 SD card - rename openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2 to "cxsw_update.tar.bz2" - put SD card in device - device will install OpenWRT on internal flash Installation via telnet: - extract the "factory.bin" and "install.sh" from newly created openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2 to FAT32 USB stick root - telnet to 10.10.10.254, user: root, password: cxswprin - plug the USB in USB1 port - cd /media/usbdisk/ - sh install.sh - device will write "factory.bin" to internal flash Co-authored-by: George Brooke <figgyc@figgyc.uk> Co-authored-by: Peca Nesovanovic <peca.nesovanovic@sattrakt.com> Co-authored-by: shivajiva101 <github.com/shivajiva101> Co-authored-by: Axel Sepulveda <ansepulveda@uc.cl> Signed-off-by: Axel Sepulveda <ansepulveda@uc.cl> Link: https://github.com/openwrt/openwrt/pull/19686 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0