David Bauer f828be4d10 ramips: use i2c-gpio driver for EX400 ... Configure the i2c pins as GPIO outputs and use the i2c-gpio driver to control the Semtech SX9512 touch controller. This fixes spurious errors in i2c transactions even at 1kHz with the native i2c driver. leds green:wan: Setting an LED's brightness failed (-6) Signed-off-by: David Bauer <mail@david-bauer.net>		2025-05-10 21:26:08 +02:00
..
base-files/etc
dts	ramips: use i2c-gpio driver for EX400	2025-05-10 21:26:08 +02:00
files/drivers	ramips: update drivers to be compatible with kernel 6.12	2025-05-07 00:40:05 +02:00
image	ramips: support Genexis EX400 touch controller	2025-05-10 21:26:08 +02:00
mt76x8	ramips: Add support for Xiaomi MiWiFi 3A	2025-04-20 21:50:22 +02:00
mt7620	ramips: mt7620: Add support for the devolo WiFi Repeater ac (MT 2767, 2779)	2025-04-22 22:06:28 +02:00
mt7621	ramips: support Genexis EX400 touch controller	2025-05-10 21:26:08 +02:00
patches-6.6	ramips: add Semtech SX9512 touch input driver	2025-05-10 21:26:08 +02:00
rt288x	ramips: rt288x: mark subtarget as source-only	2025-05-09 11:31:20 +02:00
rt305x	kernel: Activate CONFIG_NET_SWITCHDEV in generic config	2025-03-15 13:54:59 +01:00
rt3883	kernel: Activate CONFIG_NET_SWITCHDEV in generic config	2025-03-15 13:54:59 +01:00
Makefile	ramips: switch to Linux 6.6	2024-05-03 21:36:42 +01:00
modules.mk	ramips: add Semtech SX9512 touch input driver	2025-05-10 21:26:08 +02:00