mirror of
https://github.com/LiBwrt-op/openwrt-6.x.git
synced 2026-01-08 20:24:51 +00:00
fdd3a05c40
TP-Link Archer C5 v4 is a dual band router with 5 GbE ports Advertised as AC1200 for its 867Mbps (2x2) 5GHz band and 300 Mbps (2x2) 2.4GHz band. Specs: - SoC: MediaTek MT7620A - Ethernet: 5x GbE ports (Realtek RTL8367S) - Wireless 2.4GHz: MediaTek MT7620A - Wireless 5GHz: MediaTek MT7612E - RAM: 64MiB - ROM: 8MiB (GD25Q64CSIG) - 1 USB 2.0 port - 2 Buttons (WPS and reset) - 8 LEDs Flash instructions: Currently one has to install OpenWrt only via the serial console 1. Rename the factory.bin to to test.bin 2. start a TFTP server from IP address 192.168.0.225 and serve the image named test.bin 3. connect your device to the LAN port 4. power up the router and press 4 on the console to stop the boot process. 5. enter the following commands on the router console tftp 0x80060000 test.bin erase tplink 0x20000 0x7a0000 cp.b 0x80060000 0x20000 0x7a0000 reset Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Update leds, add fast-read] Signed-off-by: Gaspare Bruno <gaspare@anlix.io> [Rebuilt version based on mt7620 tplink_archer.dtsi, support for external LNA, remove bad cell count info] Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com> |
||
|---|---|---|
| .. | ||
| airoha | ||
| apm821xx | ||
| archs38 | ||
| armsr | ||
| at91 | ||
| ath25 | ||
| ath79 | ||
| bcm27xx | ||
| bcm47xx | ||
| bcm53xx | ||
| bcm63xx | ||
| bcm4908 | ||
| bmips | ||
| gemini | ||
| generic | ||
| imx | ||
| ipq40xx | ||
| ipq806x | ||
| ixp4xx | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| malta | ||
| mediatek | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| octeontx | ||
| omap | ||
| oxnas | ||
| pistachio | ||
| qoriq | ||
| qualcommax | ||
| ramips | ||
| realtek | ||
| rockchip | ||
| sifiveu | ||
| sunxi | ||
| tegra | ||
| uml | ||
| x86 | ||
| zynq | ||
| Makefile | ||