mirror of
https://github.com/Ansuel/openwrt.git
synced 2025-12-16 15:01:32 +00:00
ipq807x: add Dynalink DL-WRX36
Dynalink DL-WRX36 is a AX WIFI router with 4 1G and 1 2.5G ports.
Specifications:
• CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
• RAM: 1024MB of DDR3
• Storage: 256MB Nand
• Ethernet: 4x 1G RJ45 ports (QCA8075) + 1 2.5G Port (QCA8081)
• WLAN:
2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 1174 Mbps PHY rate
5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
• 1x USB 3.0
• 1 gpio-controlled dual color led (blue/red)
• Buttons: 1x soft reset / 1x WPS
• Power: 12V DC jack
A poulated serial header is onboard (J1004)
the connector size is a 4-pin 2.0 mm JST PH.
RX/TX is working, u-boot bootwait is active, secure boot is enabled.
Note: serial is completely deactivated in the stock firmware image.
Installation Instructions:
• obtain serial access
• stop auto boot
• saveenv (write the default env to the flash)
• check which mtd-part is rootfs by invoking "smeminfo"
It's either:
18: rootfs 0x0000ffff 0x7a00000 0x6100000
or:
18: rootfs 0x0000ffff 0x1000000 0x6100000
Set mtdids:
setenv mtdids nand0=nand0
if rootfs is: 0x7a00000 0x6100000
setenv mtdparts mtdparts=nand0:0x6100000@0x7a00000(fs)
if rootfs is: 0x1000000 0x6100000
setenv mtdparts mtdparts=nand0:0x6100000@0x1000000(fs)
saveenv
• tftpboot the initramfs image
(openwrt-ipq807x-generic-dynalink_dl-wrx36-initramfs-fit-uImage.itb)
• bootm
• Check the rootfs partition number:
cat /proc/mtd
rootfs should be mtd18
• SCP the factory image to the device and do a ubiformat
to the right rootfs partition:
ubiformat /dev/mtd18 -y -f /path_to/factory_image
• Due to secure boot is active, we need to change the bootcmd to:
fw_setenv bootcmd "setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs
root=mtd:rootfs rootfstype=squashfs rootwait; ubi part fs;
ubi read 0x44000000 kernel; bootm 0x44000000#config@rt5010w-d350-rev0"
• reboot
Note: this PR adds only single partition support, that means sysupgrade is
upgrading the current rootfs partition
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
This commit is contained in:
Dirk Buchwalder
Robert Marko
parent
d4f8a67cab
commit
dcc323f4d6
@ -8,6 +8,11 @@ touch /etc/config/ubootenv
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
dynalink,dl-wrx36)
|
||||
idx="$(find_mtd_index 0:appsblenv)"
|
||||
[ -n "$idx" ] && \
|
||||
ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
idx="$(find_mtd_index 0:appsblenv)"
|
||||
[ -n "$idx" ] && \
|
||||
|
||||
@ -27,6 +27,7 @@ endef
|
||||
ALLWIFIBOARDS:= \
|
||||
aruba_ap-365 \
|
||||
devolo_magic-2-wifi-next \
|
||||
dynalink_dl-wrx36 \
|
||||
edgecore_eap102 \
|
||||
edgecore_ecw5410 \
|
||||
edgecore_oap100 \
|
||||
@ -119,6 +120,7 @@ endef
|
||||
|
||||
$(eval $(call generate-ipq-wifi-package,aruba_ap-365,Aruba AP-365))
|
||||
$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
|
||||
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
|
||||
$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
|
||||
|
||||
BIN
package/firmware/ipq-wifi/board-dynalink_dl-wrx36.ipq8074
Normal file
BIN
package/firmware/ipq-wifi/board-dynalink_dl-wrx36.ipq8074
Normal file
Binary file not shown.
@ -11,6 +11,9 @@ ipq807x_setup_interfaces()
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
dynalink,dl-wrx36)
|
||||
ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4" "eth0"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
|
||||
@ -11,6 +11,7 @@ case "$FIRMWARE" in
|
||||
case "$board" in
|
||||
edgecore,eap102|\
|
||||
edimax,cax1800|\
|
||||
dynalink,dl-wrx36|\
|
||||
qnap,301w|\
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600|\
|
||||
|
||||
@ -10,6 +10,9 @@ platform_check_image() {
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
dynalink,dl-wrx36)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
active="$(fw_printenv -n active)"
|
||||
if [ "$active" -eq "1" ]; then
|
||||
|
||||
@ -0,0 +1,543 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/* Copyright (c) 2022, Robert Marko <robimarko@gmail.com> */
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-hk-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Dynalink DL-WRX36";
|
||||
compatible = "dynalink,dl-wrx36", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_system_red;
|
||||
led-failsafe = &led_system_red;
|
||||
led-running = &led_system_blue;
|
||||
led-upgrade = &led_system_red;
|
||||
serial0 = &blsp1_uart5;
|
||||
/* Aliases as required by u-boot to patch MAC addresses */
|
||||
ethernet0 = &dp1;
|
||||
ethernet1 = &dp2;
|
||||
ethernet2 = &dp3;
|
||||
ethernet3 = &dp4;
|
||||
ethernet4 = &dp5;
|
||||
label-mac-device = &dp1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_system_blue: system-blue {
|
||||
label = "blue:system";
|
||||
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
|
||||
led_system_red: system-red {
|
||||
label = "red:system";
|
||||
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
|
||||
qca8075_0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
qca8075_1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
qca8075_2: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
qca8075_3: ethernet-phy@3 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
qca8081: ethernet-phy@28 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <28>;
|
||||
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
|
||||
switch_lan_bmp = <0x3e>; /* lan port bitmap */
|
||||
switch_wan_bmp = <0x40>; /* wan port bitmap */
|
||||
switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/
|
||||
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
|
||||
switch_mac_mode2 = <0xc>; /* mac mode for uniphy instance2*/
|
||||
bm_tick_mode = <0>; /* bm tick mode */
|
||||
tm_tick_mode = <0>; /* tm tick mode */
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@0 {
|
||||
port_id = <1>;
|
||||
phy_address = <0>;
|
||||
};
|
||||
port@1 {
|
||||
port_id = <2>;
|
||||
phy_address = <1>;
|
||||
};
|
||||
port@2 {
|
||||
port_id = <3>;
|
||||
phy_address = <2>;
|
||||
};
|
||||
port@3 {
|
||||
port_id = <4>;
|
||||
phy_address = <3>;
|
||||
};
|
||||
port@5 {
|
||||
port_id = <6>;
|
||||
phy_address = <28>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
};
|
||||
|
||||
port_scheduler_resource {
|
||||
port@0 {
|
||||
port_id = <0>;
|
||||
ucast_queue = <0 143>;
|
||||
mcast_queue = <256 271>;
|
||||
l0sp = <0 35>;
|
||||
l0cdrr = <0 47>;
|
||||
l0edrr = <0 47>;
|
||||
l1cdrr = <0 7>;
|
||||
l1edrr = <0 7>;
|
||||
};
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
ucast_queue = <144 159>;
|
||||
mcast_queue = <272 275>;
|
||||
l0sp = <36 39>;
|
||||
l0cdrr = <48 63>;
|
||||
l0edrr = <48 63>;
|
||||
l1cdrr = <8 11>;
|
||||
l1edrr = <8 11>;
|
||||
};
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
ucast_queue = <160 175>;
|
||||
mcast_queue = <276 279>;
|
||||
l0sp = <40 43>;
|
||||
l0cdrr = <64 79>;
|
||||
l0edrr = <64 79>;
|
||||
l1cdrr = <12 15>;
|
||||
l1edrr = <12 15>;
|
||||
};
|
||||
port@3 {
|
||||
port_id = <3>;
|
||||
ucast_queue = <176 191>;
|
||||
mcast_queue = <280 283>;
|
||||
l0sp = <44 47>;
|
||||
l0cdrr = <80 95>;
|
||||
l0edrr = <80 95>;
|
||||
l1cdrr = <16 19>;
|
||||
l1edrr = <16 19>;
|
||||
};
|
||||
port@4 {
|
||||
port_id = <4>;
|
||||
ucast_queue = <192 207>;
|
||||
mcast_queue = <284 287>;
|
||||
l0sp = <48 51>;
|
||||
l0cdrr = <96 111>;
|
||||
l0edrr = <96 111>;
|
||||
l1cdrr = <20 23>;
|
||||
l1edrr = <20 23>;
|
||||
};
|
||||
port@5 {
|
||||
port_id = <5>;
|
||||
ucast_queue = <208 223>;
|
||||
mcast_queue = <288 291>;
|
||||
l0sp = <52 55>;
|
||||
l0cdrr = <112 127>;
|
||||
l0edrr = <112 127>;
|
||||
l1cdrr = <24 27>;
|
||||
l1edrr = <24 27>;
|
||||
};
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
ucast_queue = <224 239>;
|
||||
mcast_queue = <292 295>;
|
||||
l0sp = <56 59>;
|
||||
l0cdrr = <128 143>;
|
||||
l0edrr = <128 143>;
|
||||
l1cdrr = <28 31>;
|
||||
l1edrr = <28 31>;
|
||||
};
|
||||
port@7 {
|
||||
port_id = <7>;
|
||||
ucast_queue = <240 255>;
|
||||
mcast_queue = <296 299>;
|
||||
l0sp = <60 63>;
|
||||
l0cdrr = <144 159>;
|
||||
l0edrr = <144 159>;
|
||||
l1cdrr = <32 35>;
|
||||
l1edrr = <32 35>;
|
||||
};
|
||||
};
|
||||
port_scheduler_config {
|
||||
port@0 {
|
||||
port_id = <0>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <0 1>; /*L0 SPs*/
|
||||
/*cpri cdrr epri edrr*/
|
||||
cfg = <0 0 0 0>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
/*unicast queues*/
|
||||
ucast_queue = <0 4 8>;
|
||||
/*multicast queues*/
|
||||
mcast_queue = <256 260>;
|
||||
/*sp cpri cdrr epri edrr*/
|
||||
cfg = <0 0 0 0 0>;
|
||||
};
|
||||
group@1 {
|
||||
ucast_queue = <1 5 9>;
|
||||
mcast_queue = <257 261>;
|
||||
cfg = <0 1 1 1 1>;
|
||||
};
|
||||
group@2 {
|
||||
ucast_queue = <2 6 10>;
|
||||
mcast_queue = <258 262>;
|
||||
cfg = <0 2 2 2 2>;
|
||||
};
|
||||
group@3 {
|
||||
ucast_queue = <3 7 11>;
|
||||
mcast_queue = <259 263>;
|
||||
cfg = <0 3 3 3 3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <36>;
|
||||
cfg = <0 8 0 8>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <37>;
|
||||
cfg = <1 9 1 9>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <144>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <272>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <36 0 48 0 48>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <40>;
|
||||
cfg = <0 12 0 12>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <41>;
|
||||
cfg = <1 13 1 13>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <160>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <276>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <40 0 64 0 64>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@3 {
|
||||
port_id = <3>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <44>;
|
||||
cfg = <0 16 0 16>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <45>;
|
||||
cfg = <1 17 1 17>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <176>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <280>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <44 0 80 0 80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@4 {
|
||||
port_id = <4>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <48>;
|
||||
cfg = <0 20 0 20>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <49>;
|
||||
cfg = <1 21 1 21>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <192>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <284>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <48 0 96 0 96>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@5 {
|
||||
port_id = <5>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <52>;
|
||||
cfg = <0 24 0 24>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <53>;
|
||||
cfg = <1 25 1 25>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <208>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <288>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <52 0 112 0 112>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <56>;
|
||||
cfg = <0 28 0 28>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <57>;
|
||||
cfg = <1 29 1 29>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <224>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <292>;
|
||||
mcast_loop_pri = <4>;
|
||||
cfg = <56 0 128 0 128>;
|
||||
};
|
||||
};
|
||||
};
|
||||
port@7 {
|
||||
port_id = <7>;
|
||||
l1scheduler {
|
||||
group@0 {
|
||||
sp = <60>;
|
||||
cfg = <0 32 0 32>;
|
||||
};
|
||||
group@1 {
|
||||
sp = <61>;
|
||||
cfg = <1 33 1 33>;
|
||||
};
|
||||
};
|
||||
l0scheduler {
|
||||
group@0 {
|
||||
ucast_queue = <240>;
|
||||
ucast_loop_pri = <16>;
|
||||
mcast_queue = <296>;
|
||||
cfg = <60 0 144 0 144>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&soc {
|
||||
dp1: dp1 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <6>;
|
||||
reg = <0x3a007000 0x3fff>;
|
||||
qcom,mactype = <0>;
|
||||
local-mac-address = [000000000000];
|
||||
phy-handle = <&qca8081>;
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
|
||||
dp2: dp2 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <4>;
|
||||
reg = <0x3a001600 0x200>;
|
||||
qcom,mactype = <0>;
|
||||
local-mac-address = [000000000000];
|
||||
phy-handle = <&qca8075_3>;
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
|
||||
dp3: dp3 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <3>;
|
||||
reg = <0x3a001400 0x200>;
|
||||
qcom,mactype = <0>;
|
||||
local-mac-address = [000000000000];
|
||||
phy-handle = <&qca8075_2>;
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
|
||||
dp4: dp4 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <2>;
|
||||
reg = <0x3a001200 0x200>;
|
||||
qcom,mactype = <0>;
|
||||
local-mac-address = [000000000000];
|
||||
phy-handle = <&qca8075_1>;
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
|
||||
dp5: dp5 {
|
||||
device_type = "network";
|
||||
compatible = "qcom,nss-dp";
|
||||
qcom,id = <1>;
|
||||
reg = <0x3a001000 0x200>;
|
||||
qcom,mactype = <1>;
|
||||
local-mac-address = [000000000000];
|
||||
phy-handle = <&qca8075_0>;
|
||||
phy-mode = "sgmii";
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
qcom,ath11k-calibration-variant = "Dynalink-DL-WRX36";
|
||||
};
|
||||
@ -17,6 +17,19 @@ define Device/UbiFit
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/dynalink_dl-wrx36
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Dynalink
|
||||
DEVICE_MODEL := DL-WRX36
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
|
||||
endef
|
||||
TARGET_DEVICES += dynalink_dl-wrx36
|
||||
|
||||
define Device/edgecore_eap102
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user