him411/openwrt-redmi-ax3000
1
0
Fork 0
mirror of https://github.com/hzyitc/openwrt-redmi-ax3000.git synced 2025-12-16 16:31:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

ath79: add support for NEC Aterm WF1200HP2

Browse Source 
NEC Aterm WF1200HP2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router with FE
ports, based on AR9344.

Specification:

- SoC              : Atheros AR9344
- RAM              : DDR2 128 MiB (2x ESMT M14D5121632A-2.5BG2A)
- Flash            : SPI-NOR 8 MiB (Macronix MX25L6406EM2I-12G)
- WLAN             : 2.4/5 GHz 2T2R
  - 2.4 GHz        : Atheros AR9344 (SoC)
  - 5 GHz          : Qualcomm Atheros QCA9882
- Ethernet         : 4x 10/100 Mbps
  - switch         : Atheros AR9344 (SoC)
- LEDs/Keys (GPIO) : 12x/4x
  - note           : all LEDs are controlled by ath10k chip (QCA9882)
- UART             : through-hole on PCB (J1)
  - assignment     : 3.3V, GND, NC, TX, RX from tri-angle marking
  - settings       : 9600n8 (U-Boot: 115200n8)
- Power            : 12 VDC, 0.7 A (Max. 8 W)
- Stock OS         : NetBSD based

Flash instruction using initramfs-factory.bin image (StockFW WebUI):

1. Boot WF1200HP2 with router mode
2. Access to the WebUI ("http://aterm.me/" or "http://192.168.10.1/") on
   the device and open firmware update page ("ファームウェア更新")
3. Select the OpenWrt initramfs-factory.bin image and click update
   ("更新") button
4. After updating, the device will be rebooted and booted with OpenWrt
   initramfs image
5. On the initramfs image, upload (or download) uboot.bin and
   sysupgrade.bin image to the device
6. Replace the bootloader with uboot.bin image

   mtd write <uboot.bin image> bootloader

7. Perform sysupgrade with sysupgrade.bin image

   sysupgrade <sysuppgrade image>

8. Wait ~120 seconds to complete flashing and rebooting

Flash instruction using initramfs-factory.bin image (bootloader CLI):

 1. Connect and open serial console
 2. Power on WF1200HP2 and interrupt bootloader by ESC key
 3. Login to the bootloader CLI with the password "chiron"
 4. Start TFTP server by "tftpd" command
 5. Upload initramfs-factory.bin via tftp from your computer

    example (Windows): tftp -i 192.168.0.1 PUT initramfs-factory.bin

 6. Boot initramfs image by "boot" command
 7. On the initramfs image, backup the stock bootloader and firmware if
    needed
 8. Upload (or download) uboot.bin and sysupgrade.bin image to the
    device
 9. Replace the bootloader with uboot.bin image (see above)
10. Perform sysupgrade with sysupgrade.bin image (see above)
11. Wait ~120 seconds to complete flashing and rebooting

Notes:

- The stock bootloader requires the unknown filesystem on firmware area
  in the flash chip. Booting OpenWrt from that filesystem cannot be
  handled, so the bootloader needs to be replaced to mainline U-Boot
  before OpenWrt installation.

Known issues:

- All LEDs on the front side are connected to the GPIO controller on the
  ath10k chip (QCA9882) and controlled by it. The current ath10k driver
  supports only one LED as "ath10k-phyN", but using as a GPIO controller
  is not supported yet. As a result, all 12x LEDs on the front side
  cannot be controlled by users.

MAC Addresses:

LAN    : C0:25:A2:xx:xx:44 (config,  0x6 (hex))
WAN    : C0:25:A2:xx:xx:45 (config,  0xc (hex))
2.4 GHz: C0:25:A2:xx:xx:46 (config,  0x0 (hex))
5 GHz  : C0:25:A2:xx:xx:47 (config, 0x12 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20611
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
INAGAKI Hiroshi 2025-10-07 23:53:32 +09:00 committed by Hauke Mehrtens
parent 29014b54d4
commit 5baaee843a
5 changed files with 26 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
target/linux/ath79/dts/ar9344_nec_wf1200hp2.dts Normal file
View File

@ -0,0 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344_nec_wf1200.dtsi"
/ {
compatible = "nec,wf1200hp2", "qca,ar9344";
model = "NEC Aterm WF1200HP2";
};

2
target/linux/ath79/image/lzma-loader/src/board.c
View File

@ -220,6 +220,7 @@ static inline void huawei_ap_init(void) {}
#endif
#if defined(CONFIG_BOARD_NEC_WF1200HP) || \
defined(CONFIG_BOARD_NEC_WF1200HP2) || \
defined(CONFIG_BOARD_NEC_WG1400HP) || \
defined(CONFIG_BOARD_NEC_WG1800HP) || \
defined(CONFIG_BOARD_NEC_WG1800HP2) || \
@ -264,6 +265,7 @@ static inline void nec_aterm_reset_common(void)
#endif
#if defined(CONFIG_BOARD_NEC_WF1200HP) || \
defined(CONFIG_BOARD_NEC_WF1200HP2) || \
defined(CONFIG_BOARD_NEC_WG600HP) || \
defined(CONFIG_BOARD_NEC_WR8750N) || \
defined(CONFIG_BOARD_NEC_WR9500N)

13
target/linux/ath79/image/tiny.mk
View File

@ -134,6 +134,19 @@ define Device/nec_wf1200hp
endef
TARGET_DEVICES += nec_wf1200hp
define Device/nec_wf1200hp2
DEVICE_MODEL := Aterm WF1200HP2
SOC := ar9344
BLOCKSIZE := 4k
IMAGE_SIZE := 7936k
NEC_FW_TYPE := H053
$(Device/nec-netbsd-aterm)
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct \
-uboot-envtools
UBOOT_PATH := $$(STAGING_DIR_IMAGE)/$$(SOC)_nec_aterm_fe-u-boot.bin
endef
TARGET_DEVICES += nec_wf1200hp2
define Device/nec_wg600hp
DEVICE_MODEL := Aterm WG600HP
SOC := ar9344

3
target/linux/ath79/tiny/base-files/etc/board.d/02_network
View File

@ -72,7 +72,8 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "4:lan:1"
;;
nec,wf1200hp)
nec,wf1200hp|\
nec,wf1200hp2)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"

1
target/linux/ath79/tiny/base-files/lib/upgrade/platform.sh
View File

@ -13,6 +13,7 @@ platform_check_image() {
case "$board" in
nec,wf1200hp|\
nec,wf1200hp2|\
nec,wg600hp|\
nec,wr8750n|\
nec,wr9500n)