diff --git a/package/boot/uboot-envtools/files/ipq50xx b/package/boot/uboot-envtools/files/ipq50xx new file mode 100644 index 0000000000..73083b078e --- /dev/null +++ b/package/boot/uboot-envtools/files/ipq50xx @@ -0,0 +1,20 @@ +#!/bin/sh + +[ -e /etc/config/ubootenv ] && exit 0 + +touch /etc/config/ubootenv + +. /lib/uboot-envtools.sh +. /lib/functions.sh + +board=$(board_name) +case "$board" in + redmi,ax3000) + ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x10000" "0x20000" + ;; +esac + +config_load ubootenv +config_foreach ubootenv_add_app_config ubootenv + +exit 0 diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index b0b0d53c60..e5e99137d1 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -36,6 +36,7 @@ ALLWIFIBOARDS:= \ netgear_wax218 \ prpl_haze \ qnap_301w \ + redmi_ax3000 \ redmi_ax6 \ wallys_dr40x9 \ xiaomi_ax3600 \ @@ -129,6 +130,7 @@ $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800)) $(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218)) $(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w)) $(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze)) +$(eval $(call generate-ipq-wifi-package,redmi_ax3000,Redmi AX3000)) $(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6)) $(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9)) $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600)) diff --git a/package/firmware/ipq-wifi/src/board-redmi_ax3000.ipq5018 b/package/firmware/ipq-wifi/src/board-redmi_ax3000.ipq5018 new file mode 100644 index 0000000000..5b87f35cb9 Binary files /dev/null and b/package/firmware/ipq-wifi/src/board-redmi_ax3000.ipq5018 differ diff --git a/package/firmware/ipq-wifi/src/board-redmi_ax3000.qcn6122 b/package/firmware/ipq-wifi/src/board-redmi_ax3000.qcn6122 new file mode 100644 index 0000000000..2489f93c64 Binary files /dev/null and b/package/firmware/ipq-wifi/src/board-redmi_ax3000.qcn6122 differ diff --git a/target/linux/ipq50xx/base-files/etc/board.d/01_leds b/target/linux/ipq50xx/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..137a1e0c6c --- /dev/null +++ b/target/linux/ipq50xx/base-files/etc/board.d/01_leds @@ -0,0 +1,29 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +bits() { + local val + val=0 + + while [ -n "$1" ]; do + val=$(( val | (1 << $1) )) + shift 1 + done + + printf "0x%x" "$val" +} + +board_config_update + +board=$(board_name) + +case $board in + redmi,ax3000) + ucidef_set_led_switch "wan" "WAN" "blue:internet" "switch1" "$( bits 4 )" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ipq50xx/base-files/etc/board.d/02_network b/target/linux/ipq50xx/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..4d46bf642e --- /dev/null +++ b/target/linux/ipq50xx/base-files/etc/board.d/02_network @@ -0,0 +1,23 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +ipq50xx_setup_interfaces() +{ + local board="$1" + case $board in + redmi,ax3000) + ucidef_add_switch "switch1" \ + "6u@eth1" "5u@eth0" \ + "1:lan:1" "2:lan:2" "3:lan:3" \ + "4:wan" + ;; + esac +} + +board_config_update +board=$(board_name) +ipq50xx_setup_interfaces $board +board_config_flush + +exit 0 diff --git a/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-board_id b/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-board_id new file mode 100644 index 0000000000..739e8e2c20 --- /dev/null +++ b/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/10-ath11k-board_id @@ -0,0 +1,25 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +set_board_id() { + echo "$1" >/lib/firmware/$FIRMWARE +} + +board=$(board_name) + +case "$FIRMWARE" in + "ath11k/IPQ5018/hw1.0/board_id-ahb-c000000.wifi") + case "$board" in + redmi,ax3000) + case "$(strings /dev/mtdblock15 | grep wl_pa_type= | cut -d= -f2)" in + epa) set_board_id 0x24 ;; + ipa|*) set_board_id 0x10 ;; + esac + ;; + esac + ;; + *) + exit 1 + ;; +esac diff --git a/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata new file mode 100644 index 0000000000..32f8e7a69d --- /dev/null +++ b/target/linux/ipq50xx/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -0,0 +1,27 @@ +#!/bin/sh + +[ -e /lib/firmware/$FIRMWARE ] && exit 0 + +. /lib/functions/caldata.sh + +board=$(board_name) + +case "$FIRMWARE" in + "ath11k/IPQ5018/hw1.0/caldata.bin") + case "$board" in + redmi,ax3000) + caldata_extract "0:ART" 0x1000 0x20000 + ;; + esac + ;; + "ath11k/qcn6122/hw1.0/caldata_1.bin") + case "$board" in + redmi,ax3000) + caldata_extract "0:ART" 0x26800 0x20000 + ;; + esac + ;; + *) + exit 1 + ;; +esac diff --git a/target/linux/ipq50xx/base-files/etc/init.d/uboot_env b/target/linux/ipq50xx/base-files/etc/init.d/uboot_env new file mode 100755 index 0000000000..18c7f4d0b3 --- /dev/null +++ b/target/linux/ipq50xx/base-files/etc/init.d/uboot_env @@ -0,0 +1,34 @@ +#!/bin/sh /etc/rc.common + +START=99 + +. /lib/functions.sh + +boot() { + case $(board_name) in + redmi,ax3000) + fw_printenv >/dev/null || return 0 + + local flag_ota_reboot="$(fw_printenv flag_ota_reboot | cut -d'=' -f2)" + if [[ "$flag_ota_reboot" == 1 ]]; then + local mtd="$(grep -oE 'ubi.mtd=[a-zA-Z0-9\-\_]*' /proc/cmdline | cut -d'=' -f2)" + case $mtd in + rootfs) + fw_setenv flag_last_success 0 + fw_setenv flag_ota_reboot 0 + fw_setenv flag_boot_success 1 + ;; + rootfs_1) + fw_setenv flag_last_success 1 + fw_setenv flag_ota_reboot 0 + fw_setenv flag_boot_success 1 + ;; + *) + echo "Unable to determine UBIPART: ubi.mtd=$mtd" + return 1 + ;; + esac + fi + ;; + esac +} diff --git a/target/linux/ipq50xx/base-files/lib/upgrade/mi_dualboot.sh b/target/linux/ipq50xx/base-files/lib/upgrade/mi_dualboot.sh new file mode 100644 index 0000000000..9d977e4961 --- /dev/null +++ b/target/linux/ipq50xx/base-files/lib/upgrade/mi_dualboot.sh @@ -0,0 +1,80 @@ +. /lib/functions.sh + +mi_dualboot_check_image() { + local ret=0 + + local file_type="$( identify "$1" )" + if [ "${file_type}" != ubi ]; then + v "Unsupport file type: ${file_type}" + v "Please use ubi file" + ret=1 + fi + + local mtd="$( grep -oE 'ubi.mtd=[a-zA-Z0-9\-\_]*' /proc/cmdline | cut -d'=' -f2 )" + if [[ "${mtd}" != "rootfs" ]] && [[ "${mtd}" != "rootfs_1" ]]; then + v "Unable to determine UBIPART: ubi.mtd=${mtd}" + ret=1 + fi + + if ! fw_printenv >/dev/null; then + v "Fail to read U-Boot env" + ret=1 + fi + + return ${ret} +} + +mi_dualboot_do_upgrade() { + mkdir -p /var/lock + fw_printenv >/dev/null || return 1 + + # Determine UBIPART + local mtd="$( grep -oE 'ubi.mtd=[a-zA-Z0-9\-\_]*' /proc/cmdline | cut -d'=' -f2 )" + case "${mtd}" in + rootfs) + CI_UBIPART="rootfs_1" + local current=0 + ;; + rootfs_1) + CI_UBIPART="rootfs" + local current=1 + ;; + *) + v "Unable to determine UBIPART: ubi.mtd=$mtd" + return 1 + ;; + esac + + local mtdnum="$( find_mtd_index "${CI_UBIPART}" )" + v "Flashing to ${CI_UBIPART}(mtd${mtdnum})" + ubiformat "/dev/mtd${mtdnum}" -f "$1" -y || return 1 + sync + + ubiattach --mtdn "${mtdnum}" + + # Check to avoid the bug of the vendor U-Boot + local ubidev="$( nand_find_ubi "${CI_UBIPART}" )" + if [ -z "$( nand_find_volume "${ubidev}" "kernel" )" ]; then + v "\"kernel\" volume doesn't exist, which causes a bug of the vendor U-Boot." + v "When try to boot this system, U-Boot will always set flag_try_sys1_failed=0 even if this is the sysem 2" + return 1 + fi + + # Restore configurations + [ -f "${UPGRADE_BACKUP}" ] && CI_UBIPART="${CI_UBIPART}" nand_restore_config "${UPGRADE_BACKUP}" + + # Clean the failed flag. So we can boot to them. + fw_setenv flag_try_sys1_failed 0 || return 1 + fw_setenv flag_try_sys2_failed 0 || return 1 + + # Tell u-boot that the current is able to boot. + fw_setenv flag_last_success ${current} || return 1 + + # Tell u-boot to try to boot the other system. + # If it failed, it will clean this flag. + fw_setenv flag_ota_reboot 1 || return 1 + + # When this flag is set to 0 and the `flag_ota_reboot` is 1, + # the u-boot will roll back to `flag_last_success`. + fw_setenv flag_boot_success || return 1 +} diff --git a/target/linux/ipq50xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq50xx/base-files/lib/upgrade/platform.sh index adff896d2c..d1900f138a 100644 --- a/target/linux/ipq50xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq50xx/base-files/lib/upgrade/platform.sh @@ -1,8 +1,15 @@ . /lib/functions.sh +RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + platform_check_image() { local board=$(board_name) case $board in + redmi,ax3000) + mi_dualboot_check_image "$1" + return $? + ;; *) v "Sysupgrade is not supported on your board($board) yet." return 1 @@ -13,6 +20,9 @@ platform_check_image() { platform_do_upgrade() { local board=$(board_name) case $board in + redmi,ax3000) + mi_dualboot_do_upgrade "$1" + ;; *) default_do_upgrade "$1" ;; diff --git a/target/linux/ipq50xx/config-5.15 b/target/linux/ipq50xx/config-5.15 index 8091409aa8..7bd06a0786 100644 --- a/target/linux/ipq50xx/config-5.15 +++ b/target/linux/ipq50xx/config-5.15 @@ -1297,6 +1297,8 @@ CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT=y # CONFIG_MTD_UBI_GLUEBI is not set CONFIG_MDIO_IPQ4019=y CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_LEDS_GPIO=y +CONFIG_SWCONFIG_LEDS=y CONFIG_IPQ_APSS_PLL=y CONFIG_IPQ_APSS_6018=y diff --git a/target/linux/ipq50xx/dts/ipq5000-ax3000.dts b/target/linux/ipq50xx/dts/ipq5000-ax3000.dts new file mode 100644 index 0000000000..784667e279 --- /dev/null +++ b/target/linux/ipq50xx/dts/ipq5000-ax3000.dts @@ -0,0 +1,556 @@ +// SPDX-License-Identifier: (GPL-2.0+) + +/dts-v1/; + +#include "ipq5018.dtsi" +#include +#include + +/ { + model = "Redmi AX3000"; + compatible = "redmi,ax3000", "qcom,ipq5018"; + + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&intc>; + + aliases { + serial0 = &blsp1_uart1; + + ethernet0 = &mac0; + ethernet1 = &mac1; + + led-boot = &led_system_blue; + led-failsafe = &led_system_yellow; + led-running = &led_system_blue; + led-upgrade = &led_system_yellow; + }; + + chosen { + // Override the root parameter from u-boot + // Increase coherent_pool size for WiFi + bootargs-append = " root=/dev/ubiblock0_1 coherent_pool=2M"; + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + // Not sure why but without this, WiFi will crash + tz_apps@4a400000 { + no-map; + // The size is incorrent, but it works + reg = <0x0 0x4a400000 0x0 0x700000>; + }; + + q6_mem_regions: q6_mem_regions@4b000000 { + no-map; + // reg = <0x0 0x4b000000 0x0 0x3b00000>; + reg = <0x0 0x4b000000 0x0 0x3000000>; + }; + }; + + thermal-zones { + status = "ok"; + }; +}; + +&tlmm { + blsp_uart0_pins: blsp_uart0_pins { + pins = + "gpio28", // RX + "gpio29"; // TX + function = "blsp0_uart1"; + drive-strength = <8>; + bias-disable; + }; + + qspi_nand_pins: qspi_nand_pins { + clock { + pins = "gpio9"; + function = "qspi_clk"; + drive-strength = <8>; + bias-disable; + }; + + cs { + pins = "gpio8"; + function = "qspi_cs"; + drive-strength = <8>; + bias-disable; + }; + + data0 { + pins = "gpio7"; + function = "qspi0"; + drive-strength = <8>; + bias-disable; + }; + + data1 { + pins = "gpio6"; + function = "qspi1"; + drive-strength = <8>; + bias-disable; + }; + + data2 { + pins = "gpio5"; + function = "qspi2"; + drive-strength = <8>; + bias-disable; + }; + + data3 { + pins = "gpio4"; + function = "qspi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio1_pins { + mdc { + pins = "gpio36"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio37"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + leds_pins: leds_pins { + led_system_blue { + pins = "gpio19"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + led_system_yellow { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + led_internet_blue { + pins = "gpio22"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + + led_internet_yellow { + pins = "gpio20"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + button_pins: button_pins { + button_reset { + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + button_mesh { + pins = "gpio23"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&blsp_uart0_pins>; + pinctrl-names = "default"; + status = "ok"; +}; + +&qpic_bam { + status = "ok"; +}; + +&nand { + pinctrl-0 = <&qspi_nand_pins>; + pinctrl-names = "default"; + status = "ok"; +}; + +&soc { + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led_system_blue: led_system_blue { + label = "blue:system"; + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_system_yellow: led_system_yellow { + label = "yellow:system"; + gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>; + }; + + led_internet_blue: led_internet_blue { + label = "blue:internet"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + }; + + led_internet_yellow: led_internet_yellow { + label = "yellow:internet"; + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + }; + }; + + button { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + button_reset { + label = "reset"; + gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <60>; + }; + + button_mesh { + label = "mesh"; + gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <60>; + }; + }; + + ess-instance { + num_devices = <2>; + + // Dummy switch, to describe how the external ports connects to the MAC + // For example, some chips have PSGMII ports which combine 5 MAC into + // 1 external port. + // For IPQ50xx, this is used to choose SGMII or SGMII-plus + ess-switch@0x39c00000 { + compatible = "qcom,ess-switch-ipq50xx"; + device_id = <0>; + + cmnblk_clk = "internal_96MHz"; + + // MAC1 Mode + // switch_mac_mode = <0xc>; // PORT_WRAPPER_SGMII_PLUS + switch_mac_mode = <0xf>; // PORT_WRAPPER_SGMII_CHANNEL0 + + qcom,port_phyinfo { + // MAC0 -> GE Phy -> QCA8337 Phy4 + port@0 { + port_id = <1>; + + mdiobus = <&mdio0>; + phy_address = <7>; + + phy_dac = <0x10 0x10>; + }; + + // MAC1 ---SGMII---> QCA8337 SerDes + port@1 { + port_id = <2>; + + forced-speed = <1000>; + forced-duplex = <1>; + }; + }; + }; + + // QCA8337 + ess-switch1@1 { + compatible = "qcom,ess-switch-qca83xx"; + device_id = <1>; + + reset_gpio = <26>; + + switch_access_mode = "mdio"; + mdio-bus = <&mdio1>; + + qca,ar8327-initvals = < + 0x000c 0x00000080 // PAD6_MODE = MAC6_SGMII_EN + 0x0010 0x002613a0 // PWS_REG = DEFAULT_VALUE | SERDES_AEN + 0x0094 0x000010ce // PORT6_STATUS = DEFAULT_VALUE | DUPLEX_MODE_6 | RXMAC_EN_6 | + // TXMAC_EN_6 | SPEED_6(1000M) + 0x00e0 0xc74164de // SGMII_CTRL = DEFAULT_VALUE | MODE_CTRL_25M(SGMII_PHY) | SGMII_EN_SD | + // SGMII_EN_TX | SGMII_EN_RX | SGMII_EN_PLL + >; + + switch_cpu_bmp = <0x60>; // CPU port bitmap: 5 6 + switch_lan_bmp = <0x0e>; // LAN port bitmap: 1 2 3 + switch_wan_bmp = <0x10>; // WAN port bitmap: 4 + + qcom,port_phyinfo { + // MAC1 -> Phy0 -> LAN1 + port@1 { + port_id = <1>; + phy_address = <0>; + }; + + // MAC2 -> Phy1 -> LAN2 + port@2 { + port_id = <2>; + phy_address = <1>; + }; + + // MAC3 -> Phy2 -> LAN3 + port@3 { + port_id = <3>; + phy_address = <2>; + }; + + // MAC4 -> Phy3 -> WAN + port@4 { + port_id = <4>; + phy_address = <3>; + }; + + // MAC5 -> Phy4 -> IPQ5000 GE Phy + port@5 { + port_id = <5>; + phy_address = <4>; + }; + + // MAC6 ---SGMII---> IPQ5000 MAC1 + port@6 { + port_id = <6>; + + forced-speed = <1000>; + forced-duplex = <1>; + }; + }; + }; + }; + + // MAC0 -> GE Phy + mac0: dp1 { + compatible = "qcom,nss-dp"; + device_type = "network"; + qcom,id = <1>; + + reg = <0x39C00000 0x10000>; + interrupts = ; + clocks = <&gcc GCC_SNOC_GMAC0_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + + qcom,mactype = <2>; // GMAC_HAL_TYPE_SYN_GMAC + local-mac-address = [000000000000]; + phy-handle = <&ge_phy>; + phy-mode = "internal"; + }; + + // MAC1 ---SGMII---> QCA8337 SerDes + mac1: dp2 { + compatible = "qcom,nss-dp"; + device_type = "network"; + qcom,id = <2>; + + reg = <0x39D00000 0x10000>; + interrupts = ; + clocks = <&gcc GCC_SNOC_GMAC1_AXI_CLK>; + clock-names = "nss-snoc-gmac-axi-clk"; + + qcom,mactype = <2>; // GMAC_HAL_TYPE_SYN_GMAC + local-mac-address = [000000000000]; + phy-mode = "sgmii"; + }; +}; + +&mdio0 { + status = "ok"; + + resets = <&gcc GCC_GEPHY_MDC_SW_ARES>; + reset-names = "phy"; + + // IPQ5018 GE Phy -> QCA8337 Phy4 + ge_phy: ethernet-phy@0 { + reg = <7>; + }; +}; + +&mdio1 { + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + status = "ok"; + + reset-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + + // QCA8337 Phy0 -> LAN1 + ethernet-phy@0 { + reg = <0>; + }; + + // QCA8337 Phy1 -> LAN2 + ethernet-phy@1 { + reg = <1>; + }; + + // QCA8337 Phy2 -> LAN3 + ethernet-phy@2 { + reg = <2>; + }; + + // QCA8337 Phy3 -> WAN + ethernet-phy@3 { + reg = <3>; + }; + + // QCA8337 Phy4 -> IPQ5018 GE Phy + ethernet-phy@4 { + reg = <4>; + }; +}; + +&q6v5_wcss { + memory-region = <&q6_mem_regions>; + + qcom,rproc = <&q6v5_wcss>; + firmware = "IPQ5018/q6_fw.mdt"; + + qcom,bootargs_smem = <507>; + boot-args = ; + + status = "ok"; + + // IPQ5018 + q6_wcss_pd1: remoteproc_pd1@4ab000 { + compatible = "qcom,ipq5018-wcss-ahb-mpd"; + + resets = + <&gcc GCC_WCSSAON_RESET>, + <&gcc GCC_WCSS_BCR>, + <&gcc GCC_CE_BCR>; + reset-names = + "wcss_aon_reset", + "wcss_reset", + "ce_reset"; + + clocks = + <&gcc GCC_WCSS_AHB_S_CLK>, + <&gcc GCC_WCSS_ACMT_CLK>, + <&gcc GCC_WCSS_AXI_M_CLK>; + clock-names = + "gcc_wcss_ahb_s_clk", + "gcc_wcss_acmt_clk", + "gcc_wcss_axi_m_clk"; + + reg = <0x4ab000 0x20>; + reg-names = "rmb"; + + // qcom,halt-regs = <&tcsr_q6_block 0xa000 0xd000 0x0>; + + interrupts-extended = + <&wcss_smp2p_in 8 0>, + <&wcss_smp2p_in 9 0>, + <&wcss_smp2p_in 12 0>, + <&wcss_smp2p_in 11 0>; + interrupt-names = + "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = + <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = + "shutdown", + "stop", + "spawn"; + + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "IPQ5018/m3_fw.mdt"; + }; + + // QCN6102 + q6_wcss_pd2: remoteproc_pd2 { + compatible = "qcom,ipq5018-wcss-pcie-mpd"; + + interrupts-extended = + <&wcss_smp2p_in 16 0>, + <&wcss_smp2p_in 17 0>, + <&wcss_smp2p_in 20 0>, + <&wcss_smp2p_in 19 0>; + interrupt-names = + "fatal", + "ready", + "spawn-ack", + "stop-ack"; + + qcom,smem-states = + <&wcss_smp2p_out 16>, + <&wcss_smp2p_out 17>, + <&wcss_smp2p_out 18>; + qcom,smem-state-names = + "shutdown", + "stop", + "spawn"; + + firmware = "IPQ5018/q6_fw.mdt"; + m3_firmware = "qcn6122/m3_fw.mdt"; + }; +}; + +&wifi0 { + // IPQ5000 + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd1>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd1"; + + // Be overridden by /etc/hotplug.d/firmware/10-ath11k-board_id + // M79: 0x10 + // M81: 0x24 + qcom,board_id = <0x24>; + + // qcom,ath11k-fw-memory-mode = <0>; + // qcom,bdf-addr = <0x4c400000>; + // qcom,caldb-addr = <0x4d200000>; + // qcom,m3-dump-addr = <0x4d400000>; + + qcom,ath11k-fw-memory-mode = <2>; + qcom,bdf-addr = <0x4c400000>; + + status = "ok"; +}; + +&wifi1 { + // QCN6102 + qcom,multipd_arch; + qcom,rproc = <&q6_wcss_pd2>; + qcom,userpd-subsys-name = "q6v5_wcss_userpd2"; + + qcom,board_id = <0x60>; + + // qcom,ath11k-fw-memory-mode = <0>; + // qcom,bdf-addr = <0x4d500000>; + // qcom,caldb-addr = <0x4e500000>; + // qcom,m3-dump-addr = <0x4ea00000>; + + qcom,ath11k-fw-memory-mode = <2>; + qcom,bdf-addr = <0x4d100000>; + qcom,m3-dump-addr = <0x4df00000>; + + status = "ok"; +}; diff --git a/target/linux/ipq50xx/image/Makefile b/target/linux/ipq50xx/image/Makefile index c0b1271f91..adaaca5bd1 100644 --- a/target/linux/ipq50xx/image/Makefile +++ b/target/linux/ipq50xx/image/Makefile @@ -31,4 +31,27 @@ define Device/UbiFit IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata endef +define Device/redmi_ax3000 + $(call Device/FitImage) + $(call Device/UbiFit) + SOC := ipq5000 + DEVICE_VENDOR := Redmi + DEVICE_MODEL := AX3000 + DEVICE_ALT0_VENDOR := Xiaomi + DEVICE_ALT0_MODEL := CR880x + DEVICE_ALT0_VARIANT := (M81 version) + DEVICE_ALT1_VENDOR := Xiaomi + DEVICE_ALT1_MODEL := CR880x + DEVICE_ALT1_VARIANT := (M79 version) + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@mp02.1 + IMAGES := nand-factory.ubi + DEVICE_PACKAGES := \ + ath11k-firmware-ipq5018 \ + ath11k-firmware-qcn6122 \ + ipq-wifi-redmi_ax3000 +endef +TARGET_DEVICES += redmi_ax3000 + $(eval $(call BuildImage))