mirror of
https://github.com/hzyitc/openwrt-redmi-ax3000.git
synced 2025-12-16 16:31:57 +00:00
1562847cde
This device is very similar, if not identical, to the TP-Link AX23 v1
but is targeted at service providers and features a completely different
flash layout.
Hardware
--------
CPU: MediaTek MT7621 DAT
RAM: 128MB DDR3 (integrated)
FLASH: 16MB SPI-NOR
WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax
SERIAL: 115200 8N1
LEDs - (3V3 - GND - RX - TX) - ETH ports
Installation
------------
Flashing is only possible via a serial connection using the sysupgrade
image; the factory image must be signed. You can flash the sysupgrade
image directly through the U-Boot console, or preferably, by booting the
initramfs image and flashing with the sysupgrade command. Follow these
steps for sysupgrade flashing:
1. Establish a UART serial connection.
2. Set up a TFTP server at 192.168.0.2 and copy the initramfs image
there.
3. Power on the device and press any key to interrupt normal boot.
4. Load the initramfs image using tftpboot.
5. Boot with bootm.
6. If you haven't done so already, back up all stock mtd partitions.
7. Copy the sysupgrade image to the router.
8. Flash OpenWrt through either LuCI or the sysupgrade command. Remember
not to attempt saving settings.
Revert to stock firmware
------------------------
Flash stock firmware via OEM web-recovery mode. If you don't have access
to the stock firmware image, you will need to restore the firmware
partition backed up earlier.
Web-Recovery
------------
The router supports an HTTP recovery mode:
1. Turn off the router.
2. Press the reset button and power on the device.
3. When all LEDs start flashing, release reset and quickly press it
again.
The interface is reachable at 192.168.0.1 and supports installation of
the OEM factory image. Note that flashing OpenWrt this way is not
possible, as mentioned above.
Signed-off-by: Darlan Pedro de Campos <darlanpedro@gmail.com>
(cherry picked from commit 2a0c9cc8cd)
256 lines
8.9 KiB
Plaintext
256 lines
8.9 KiB
Plaintext
|
|
. /lib/functions/leds.sh
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
board=$(board_name)
|
|
|
|
board_config_update
|
|
|
|
case $board in
|
|
alfa-network,ax1800rm)
|
|
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3"
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
|
|
;;
|
|
asus,rp-ac87)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_rssimon "wlan1" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow-wlan0" "RSSILOW" "green:rssilow-wlan0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimedlow-wlan0" "RSSIMEDLOW" "green:rssimedlow-wlan0" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimed-wlan0" "RSSIMED" "green:rssimed-wlan0" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh-wlan0" "RSSIHIGH" "green:rssihigh-wlan0" "wlan0" "70" "100"
|
|
ucidef_set_led_rssi "rssilow-wlan1" "RSSILOW" "green:rssilow-wlan1" "wlan1" "1" "100"
|
|
ucidef_set_led_rssi "rssimedlow-wlan1" "RSSIMEDLOW" "green:rssimedlow-wlan1" "wlan1" "20" "100"
|
|
ucidef_set_led_rssi "rssimed-wlan1" "RSSIMED" "green:rssimed-wlan1" "wlan1" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh-wlan1" "RSSIHIGH" "green:rssihigh-wlan1" "wlan1" "70" "100"
|
|
;;
|
|
asus,rt-ax53u)
|
|
ucidef_set_led_usbport "usb" "USB" "blue:usb" "usb1-port2"
|
|
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
|
|
;;
|
|
asus,rt-ax54)
|
|
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "mt76-phy0" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "WiFi 5GHz" "mt76-phy1" "phy1tpt"
|
|
;;
|
|
asus,rt-n56u-b1)
|
|
ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan"
|
|
ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan"
|
|
;;
|
|
beeline,smartbox-flash|\
|
|
beeline,smartbox-giga|\
|
|
beeline,smartbox-turbo|\
|
|
beeline,smartbox-turbo-plus|\
|
|
etisalat,s3|\
|
|
rostelecom,rt-sf-1)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
|
|
;;
|
|
beeline,smartbox-pro|\
|
|
wifire,s1500-nbn)
|
|
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" "link tx rx"
|
|
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" "link tx rx"
|
|
ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3" "link tx rx"
|
|
ucidef_set_led_netdev "lan4" "lan4" "green:lan4" "lan4" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" "link tx rx"
|
|
;;
|
|
belkin,rt1800)
|
|
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
|
|
;;
|
|
cudy,wr2100)
|
|
ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3"
|
|
ucidef_set_led_netdev "lan4" "lan4" "green:lan4" "lan4"
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
|
|
;;
|
|
d-team,newifi-d2)
|
|
ucidef_set_led_netdev "internet" "internet" "amber:internet" "wan"
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "blue:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "blue:wlan5g" "wlan1"
|
|
;;
|
|
d-team,pbr-m1|\
|
|
gehua,ghl-r-001|\
|
|
jcg,y2|\
|
|
xzwifi,creativebox-v1)
|
|
ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan"
|
|
;;
|
|
dlink,dap-1620-b1)
|
|
ucidef_set_rssimon "wlan1" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan1" "1" "40"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "21" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimed" "wlan1" "61" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "81" "100"
|
|
;;
|
|
dlink,dap-x1860-a1)
|
|
ucidef_set_rssimon "wlan1" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100"
|
|
;;
|
|
dlink,dir-1960-a1|\
|
|
dlink,dir-2640-a1|\
|
|
dlink,dir-2660-a1)
|
|
ucidef_set_led_netdev "wan" "wan" "white:net" "wan"
|
|
;;
|
|
dlink,dir-3060-a1)
|
|
ucidef_set_led_netdev "net_white" "WAN Link" "white:net" "wan" "link"
|
|
ucidef_set_led_netdev "net_orange" "WAN Activity" "orange:net" "wan" "tx rx"
|
|
;;
|
|
dlink,dir-853-a1|\
|
|
dlink,dir-853-a3)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:net" "wan"
|
|
;;
|
|
dlink,dir-853-r1)
|
|
ucidef_set_led_netdev "internet" "internet" "blue:net" "wan"
|
|
;;
|
|
dlink,dir-1935-a1|\
|
|
dlink,dir-860l-b1|\
|
|
dlink,dir-867-a1|\
|
|
dlink,dir-878-a1|\
|
|
dlink,dir-882-a1|\
|
|
dlink,dir-882-r1)
|
|
ucidef_set_led_netdev "wan" "wan" "green:net" "wan"
|
|
;;
|
|
gnubee,gb-pc2)
|
|
ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx"
|
|
;;
|
|
huasifei,ws1208v2)
|
|
ucidef_set_led_netdev "wwan0" "wwan0" "green:cellular" "wwan0" "link tx rx"
|
|
;;
|
|
keenetic,kn-3010)
|
|
ucidef_set_led_netdev "internet" "internet" "green:internet" "wan"
|
|
;;
|
|
linksys,e5600)
|
|
ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
|
|
;;
|
|
linksys,ea6350-v4|\
|
|
linksys,ea7300-v1|\
|
|
linksys,ea7300-v2|\
|
|
linksys,ea7500-v2|\
|
|
linksys,ea8100-v1|\
|
|
linksys,ea8100-v2)
|
|
ucidef_set_led_netdev "lan1" "lan1 link" "green:lan1" "lan1" "link"
|
|
ucidef_set_led_netdev "lan2" "lan2 link" "green:lan2" "lan2" "link"
|
|
ucidef_set_led_netdev "lan3" "lan3 link" "green:lan3" "lan3" "link"
|
|
ucidef_set_led_netdev "lan4" "lan4 link" "green:lan4" "lan4" "link"
|
|
ucidef_set_led_netdev "wan" "wan link" "green:wan" "wan" "link"
|
|
;;
|
|
meig,slt866)
|
|
ucidef_set_led_netdev "lan" "eth" "blue:lanwan" "lan" "link tx rx"
|
|
ucidef_set_led_netdev "wwan0" "net" "blue:internet" "wwan0" "link tx rx"
|
|
;;
|
|
mikrotik,routerboard-760igs)
|
|
ucidef_set_led_netdev "sfp" "SFP" "blue:sfp" "sfp"
|
|
;;
|
|
mikrotik,ltap-2hnd|\
|
|
mikrotik,routerboard-m11g)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "green:rssi0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssi1" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssi2" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssi3" "wlan0" "60" "100"
|
|
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "green:rssi4" "wlan0" "80" "100"
|
|
;;
|
|
mtc,wr1201)
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "br-lan"
|
|
;;
|
|
netgear,r6220|\
|
|
netgear,r6260|\
|
|
netgear,r6350|\
|
|
netgear,r6850|\
|
|
netgear,wac124|\
|
|
netgear,wndr3700-v5)
|
|
ucidef_set_led_netdev "wan" "wan" "green:wan" "wan"
|
|
;;
|
|
netgear,r6700-v2|\
|
|
netgear,r6800|\
|
|
netgear,r6900-v2|\
|
|
netgear,r7200|\
|
|
netgear,r7450)
|
|
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
|
|
ucidef_set_led_netdev "lan1" "LAN1" "white:lan1" "lan1"
|
|
ucidef_set_led_netdev "lan2" "LAN2" "white:lan2" "lan2"
|
|
ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3"
|
|
ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4"
|
|
;;
|
|
netgear,wax202)
|
|
ucidef_set_led_netdev "internet" "Internet" "green:net" "wan"
|
|
;;
|
|
oraybox,x3a)
|
|
ucidef_set_led_netdev "wan" "wan link" "red:status" "wan"
|
|
ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan"
|
|
;;
|
|
snr,snr-cpe-me1)
|
|
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
|
|
;;
|
|
tplink,archer-a6-v3|\
|
|
tplink,archer-ax23-v1|\
|
|
tplink,archer-c6-v3|\
|
|
tplink,archer-c6u-v1|\
|
|
tplink,ex220-v1)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
|
;;
|
|
tplink,deco-m4r-v4)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
|
;;
|
|
tplink,ec330-g5u-v1)
|
|
ucidef_set_led_netdev "lan" "Ethernet" "blue:ethernet" "br-lan" "link tx rx"
|
|
ucidef_set_led_netdev "wan" "Internet" "blue:internet" "wan" "link tx rx"
|
|
ucidef_set_led_netdev "wan-off" "Internet-off" "amber:internet" "wan" "link"
|
|
;;
|
|
tplink,re350-v1)
|
|
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "blue:wifi2G" "wlan0"
|
|
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "blue:wifi5G" "wlan1"
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
|
|
;;
|
|
tplink,mr600-v2-eu)
|
|
ucidef_set_led_netdev "lan" "LAN" "white:lan" "br-lan"
|
|
ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
|
|
ucidef_set_led_netdev "4g" "4G" "white:4g" "wwan0"
|
|
;;
|
|
tplink,re500-v1|\
|
|
tplink,re650-v1|\
|
|
tplink,re650-v2)
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "green:eth_act" "lan" "tx rx"
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "green:eth_link" "lan" "link"
|
|
;;
|
|
tplink,tl-wpa8631p-v3)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
|
;;
|
|
xiaomi,mi-router-4a-gigabit-v2)
|
|
ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link"
|
|
;;
|
|
xiaomi,mi-router-ac2100)
|
|
ucidef_set_led_netdev "wan-blue" "WAN (blue)" "blue:wan" "wan"
|
|
;;
|
|
xiaomi,mi-router-cr6606|\
|
|
xiaomi,mi-router-cr6608|\
|
|
xiaomi,mi-router-cr6609)
|
|
ucidef_set_led_netdev "internet" "Internet" "blue:net" "wan"
|
|
;;
|
|
xiaomi,redmi-router-ac2100)
|
|
ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
|
|
;;
|
|
youhua,wr1200js)
|
|
ucidef_set_led_netdev "internet" "INTERNET" "green:wan" "wan"
|
|
;;
|
|
yuncore,fap690)
|
|
ucidef_set_led_netdev "eth_link" "LAN link" "blue:status" "lan" "link"
|
|
;;
|
|
yuncore,ax820)
|
|
ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan"
|
|
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
|
;;
|
|
zyxel,lte3301-plus)
|
|
ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|