Mathias Kresin 1ba7fa652c ramips: fix Airlink AR725W factory image build ... The factory image can't be bigger than 3328 KByte. If the image is bigger than that, the gemtek-header tool throws an error and breaks the build. Make sure the output file to which the gemtek header should be added exists and wasn't removed during the check-size step because of it size. This will prevent hard errors in case the factory image is to big similar to what is done for sysupgrade images. Signed-off-by: Mathias Kresin <dev@kresin.me>		2017-02-04 13:46:48 +01:00
..
base-files	ramips: add support for Buffalo WCR-1166DS	2017-01-31 11:10:58 +01:00
dts	rt5350: added pcm interface in .dtsi	2017-02-03 05:10:13 +01:00
image	ramips: fix Airlink AR725W factory image build	2017-02-04 13:46:48 +01:00
mt7620	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
mt7621	ramips: Add I2C driver to the default kernel config	2017-01-15 17:43:05 +01:00
mt7628	ramips: add support for Buffalo WCR-1166DS	2017-01-31 11:10:58 +01:00
mt7688	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
patches-4.4	ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to arch/mips/ralink	2017-02-02 00:13:49 +01:00
rt288x	ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x)	2017-02-02 00:13:49 +01:00
rt305x	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
rt3883	ramips: enable 4K sector support in kernel config	2016-09-13 22:06:08 +02:00
Makefile	build: remove mips16 feature flag from target makefiles	2017-01-24 13:15:01 +01:00
modules.mk	ramips: add back the i2c-mt7621 module	2017-01-15 20:45:59 +01:00