him411/openwrt-redmi-ax3000
1
0
Fork 0
mirror of https://github.com/hzyitc/openwrt-redmi-ax3000.git synced 2025-12-29 23:01:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
Openwrt for Redmi AX3000 / Xiaomi CR880x / Xiaomi CR881x
37,975 Commits 13 Branches 108 Tags 988 MiB
C 67.9%
Makefile 19.2%
Shell 6.8%
Perl 2.8%
Assembly 1.6%
Other 1.6%
58fc50f1b0
Go to file
Karol Dudek 58fc50f1b0 ar71xx: add support for 8devices Lima board 
Lima is a module for the (IoE) internet of everything applications,
based on Qualcomm/Atheros QCA4531.

Specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 32 MB of FLASH
- 2T2R 2.4 GHz
- 2x 10/100 Mbps Ethernet
- USB 2.0 Host
- PCIe
- UART for serial console
- 14x GPIO

Flash instruction:
1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin
and rename it to 8dev_recovery.bin
2. Binary file copy to USB stick and plug into slot USB
3. Press S2 (reset) button
4. Press and hold the S1 button by 5 seconds
5. Wait ~40 seconds to complete recovery

Tested on:

- Lima development kit

Signed-off-by: Karol Dudek <karoiz@sli.pl>
2017-02-17 10:19:09 +01:00
.github
config
include kernel: update kernel 4.4 to version 4.4.49 2017-02-16 00:46:29 +01:00
package ugps: fix typo 2017-02-16 09:07:16 +01:00
scripts
target ar71xx: add support for 8devices Lima board 2017-02-17 10:19:09 +01:00
toolchain build: fix the toolchain rebuild check 2017-02-16 08:13:16 +01:00
tools
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org