him411/openwrt-redmi-ax3000
1
0
Fork 0
mirror of https://github.com/hzyitc/openwrt-redmi-ax3000.git synced 2025-12-17 08:52:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
Openwrt for Redmi AX3000 / Xiaomi CR880x / Xiaomi CR881x
65,979 Commits 13 Branches 108 Tags 988 MiB
C 67.9%
Makefile 19.2%
Shell 6.8%
Perl 2.8%
Assembly 1.6%
Other 1.6%
65215e6d46
Go to file
Luis Mita 65215e6d46 ramips: mt76x8: add support for Cudy RE1200 Outdoor v1 
Hardware:
 - SoC: MediaTek MT7628DAN
 - Flash: 8 MiB XMC 25QH64CHIQ
 - RAM: 64 MiB (integrated on SoC)
 - WLAN: 2.4 GHz (MT7603E, 11n), 5 GHz (MediaTek MT7613BEN, 11ac)
 - Ethernet: 1x10/100 Mbps LAN
 - Buttons: 1 Reset button, 1 WPS button
 - LEDs: 5x Green
 - Serial Console: unpopulated header 115200 8n1
 - Power: 24v Passive POE

MAC addresses:
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| LAN     | 80:af:ca:xx:xx:x0 | label     |
| WLAN 2g | 80:af:ca:xx:xx:x0 | label     |
| WLAN 5g | 80:af:ca:xx:xx:x2 | +2        |
+---------+-------------------+-----------+

Installation:
Please check the Wiki for this device for a more convenient solution than the one below.

1. Disassemble the device, desolder and dump the flash chip with a SPI programmer.
2. Separate the partitions with dd:

dd if=spi_dump.bin of=u-boot.bin     bs=1  skip=0        count=196608  status=progress
dd if=spi_dump.bin of=u-boot-env.bin bs=1  skip=196608   count=65536   status=progress
dd if=spi_dump.bin of=factory.bin    bs=1  skip=262144   count=65536   status=progress
dd if=spi_dump.bin of=firmware.bin   bs=1  skip=327680   count=7995392 status=progress
dd if=spi_dump.bin of=bdinfo.bin     bs=1  skip=8323072   count=65536   status=progress

3. Download the sysupgrade firmware at openwrt.bin.
4. The firmware size should be 7995392 bytes. Fix the size of your firmware putting zeros to the end, with:

truncate -s 7995392 firmware.bin

5. Combine all the parititions:

cat u-boot.bin u-boot-env.bin factory.bin openwrt.bin bdinfo.bin > spi_new.bin

6. Erase and flash the SPI chip with the new file. Solder the chip and boot the router.

Signed-off-by: Luis Mita <luis@luismita.com>
Link: https://github.com/openwrt/openwrt/pull/20381
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-10-20 00:42:28 +02:00
.devcontainer/ci-env
.github
.vscode
config
include
LICENSES
package wifi-scripts: ucode: export HE and EHT operation in scan results 2025-10-20 00:38:50 +02:00
scripts
target ramips: mt76x8: add support for Cudy RE1200 Outdoor v1 2025-10-20 00:42:28 +02:00
toolchain
tools tools: firmware-utils: update to Git HEAD (2025-10-20) 2025-10-20 00:17:46 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
COPYING
feeds.conf.default
Makefile
README.md
rules.mk

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0