him411/openwrt-redmi-ax3000
1
0
Fork 0
mirror of https://github.com/hzyitc/openwrt-redmi-ax3000.git synced 2025-12-16 16:31:57 +00:00
Code Issues Packages Projects Releases Wiki Activity
Openwrt for Redmi AX3000 / Xiaomi CR880x / Xiaomi CR881x
58,119 Commits 13 Branches 108 Tags 988 MiB
C 67.9%
Makefile 19.2%
Shell 6.8%
Perl 2.8%
Assembly 1.6%
Other 1.6%
6df6f03396
Go to file
Chukun Pan 6df6f03396 mediatek: filogic: add JCG Q30 PRO support 
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: Winbond 128MB
  RAM: DDR3 256MB
  Ethernet: 4x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset
  Power: DC 12V 1A

Flash instructions:
  1. Connect to your PC via the Gigabit port of the router,
     set a static ip on the ethernet interface of your PC.
     (ip 192.168.1.254, gateway 192.168.1.1)
  2. Attach UART, pause at u-boot menu.
  3. Select "Upgrade ATF BL2", then use preloader.bin
  4. Select "Upgrade ATF FIP", then use bl31-uboot.fip
  5. Download the initramfs image, and type "reset",
     waiting for tftp recovery to complete.
  6. After openwrt boots up, perform sysupgrade.

Note:
  1. Since NMBM is disabled, we must back up all partitions.
  2. Although we can upgrade new firmware in the stock firmware,
     we need the special fit image signature of MediaTek and
     dual boot (hack kernel) to make u-boot boot it. So just
     abandon these hacks and flash it via the serial port.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit 626344c992)
2023-12-08 07:35:46 +01:00
.github ci: add workflow for automated GitHub release 2023-11-02 14:44:49 +00:00
config build: add CycloneDX SBOM JSON support 2023-11-02 14:44:47 +00:00
include kernel: bump 5.15 to 5.15.139 2023-11-25 20:17:09 +01:00
LICENSES
package uboot-mediatek: add JCG Q30 PRO support 2023-12-08 07:35:46 +01:00
scripts scripts: sercomm-pid.py: use uppercase hwid in pid 2023-11-27 02:02:35 +01:00
target mediatek: filogic: add JCG Q30 PRO support 2023-12-08 07:35:46 +01:00
toolchain toolchain: glibc: Update glibc 2.37 to recent HEAD 2023-10-08 14:14:50 +02:00
tools tools: assign PKG_CPE_ID 2023-09-27 22:37:01 +02:00
.gitattributes
.gitignore .gitgnore: add llvm-bpf 2021-11-21 18:18:01 +01:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default OpenWrt v23.05.2: revert to branch defaults 2023-11-15 00:00:58 +01:00
Makefile build: fix pkg-config detection when inside of a nix-shell 2023-11-02 22:40:40 +01:00
README.md README: add download section 2022-10-06 16:08:24 +02:00
rules.mk treewide: add ORIG_PATH variable 2023-06-12 22:10:20 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0