mirror of
https://github.com/hzyitc/openwrt-redmi-ax3000.git
synced 2025-12-17 00:42:53 +00:00
70e26da6bd
This commit adds support for Bell XG-140G-Y003 models.
Hardware
--------
SoC: Airoha AN7581
RAM: TN4G16D3CSER-EK (512MB DDR3 1866MHz)
Flash: S35ML02G300 (256M)
ETH: AN7581 GbE Switch (eth0: LAN2, LAN3, LAN4)
EN8811H 2.5GbE PHY (eth1: LAN1)
Installation
------------
1. Connect uart to PC, press enter to login into U-Boot console.
Username: telecomadmin
Password: nE7jA%5m
2. Run the following command to setup bootcmd.
setenv bootcmd 'flash read 0x000c0000 0x880000 $loadaddr && bootm'
saveenv
3. Use a TFTP client to PUT "*-squashfs-factory.bin" to "192.168.1.1".
4. Run the following command to flash.
flash erase 0x000c0000 0x02880000
flash write 0x000c0000 $filesize $loadaddr
5. Reboot.
reset
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
|
||
|---|---|---|
| .. | ||
| airoha | ||
| apm821xx | ||
| armsr | ||
| at91 | ||
| ath79 | ||
| bcm27xx | ||
| bcm47xx | ||
| bcm53xx | ||
| bcm4908 | ||
| bmips | ||
| d1 | ||
| econet | ||
| gemini | ||
| generic | ||
| imx | ||
| ipq40xx | ||
| ipq806x | ||
| ixp4xx | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| loongarch64 | ||
| malta | ||
| mediatek | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| omap | ||
| pistachio | ||
| qoriq | ||
| qualcommax | ||
| qualcommbe | ||
| ramips | ||
| realtek | ||
| rockchip | ||
| sifiveu | ||
| siflower | ||
| starfive | ||
| stm32 | ||
| sunxi | ||
| tegra | ||
| uml | ||
| x86 | ||
| zynq | ||
| Makefile | ||