Wenli Looi 73de41898f mediatek: add support for Netgear EX6250v2 series ... Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac (Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work currently as there is no driver. Related: https://github.com/openwrt/openwrt/pull/5084 For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2. Specifications: * MT7629, 256 MiB RAM, 16 MiB SPI NOR * MT7761N (2.4GHz) / MT7762N (5GHz) - no driver * Ethernet: 1 port 10/100/1000 * UART: 115200 baud (labeled on board) Installation: * Flash the factory image through the stock web interface, or TFTP to the bootloader. NMRP can be used to TFTP without opening the case. * After installation, perform a factory reset. Wait for the device to boot, then hold the reset button for 10 seconds. This is needed because sysupgrade in the stock firmware will attempt to preserve its configuration using sysupgrade.tgz. See https://github.com/openwrt/openwrt/pull/4182 Revert to stock firmware: * Flash the stock firmware to the bootloader using TFTP/NMRP. Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>		2023-07-01 14:42:11 +02:00
..
apm821xx
ath79	ath79: Add support for MOXA AWK-1137C	2023-06-25 12:59:26 +02:00
cns3xxx
fw_printsys
fw_setsys
imx_cortexa7
imx_cortexa9
ipq40xx
ipq806x
kirkwood
lantiq
layerscape	layerscape: armv8_64b: add Traverse Ten64 NAND variant	2023-06-25 16:02:19 +02:00
mediatek_filogic	mediatek: add support for Mercusys MR90X v1	2023-06-25 12:25:22 +02:00
mediatek_mt7622
mediatek_mt7623
mediatek_mt7629	mediatek: add support for Netgear EX6250v2 series	2023-07-01 14:42:11 +02:00
mpc85xx
mvebu
mxs
oxnas
pistachio
qoriq
qualcommax_ipq807x
ramips	ramips: add support for Netgear EAX12 series	2023-07-01 14:42:11 +02:00
realtek
uboot-envtools.sh