Rafał Miłecki 8072223347 kernel: b53: force BCM531x5 port 5 link state if enabled ... Some devices (e.g. Tenda AC9 based on BCM47189B0) have BCM53125 with port 5 connected to the second Ethernet interface on the SoC. In such case there is no PHY and we need to force link manually. This assumes port 5 can be marked as enabled for such devices. It's not implemented yet unfortunately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>		2016-09-08 23:03:46 +02:00
..
b53	kernel: b53: force BCM531x5 port 5 link state if enabled	2016-09-08 23:03:46 +02:00
adm6996.c	kernel: adm6996: set carrier status	2016-08-10 03:04:08 +02:00
adm6996.h	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
ar8216.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
ar8216.h	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
ar8327.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
ar8327.h	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
ip17xx.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
mvsw61xx.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
mvsw61xx.h	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
mvswitch.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
mvswitch.h	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
psb6970.c
rtl8306.c	treewide: replace nbd@openwrt.org with nbd@nbd.name	2016-06-07 08:58:42 +02:00
rtl8366_smi.c
rtl8366_smi.h
rtl8366rb.c
rtl8366s.c
rtl8367.c
rtl8367b.c
swconfig_leds.c	switch: allow Ethernet port LEDs to show specific port speeds only	2016-02-25 13:31:26 +00:00
swconfig.c	swconfig: revert the portmapping patches, they seem to cause a segfault	2016-08-16 10:20:01 +02:00