openwrt-redmi-ax3000/target/linux
Rowan Border 33fae8421e ramips: add support for TP-Link RE220 v2
TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.

This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at>
for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
and GPIO pinout.

Specifications

MediaTek MT7628AN (580 Mhz)
64 MB of RAM
8 MB of FLASH
2T2R 2.4 GHz and 1T1R 5 GHz
1x 10/100 Mbps Ethernet
UART header on PCB (57600 8n1)
8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled separately.

Web Interface Installation

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Signed-off-by: Rowan Border <rowanjborder@gmail.com>
2020-06-30 17:23:32 +02:00
..
apm821xx
ar71xx
arc770
archs38
armvirt
at91
ath25
ath79 ath79: replace custom uImageArcher generation 2020-06-29 01:08:09 +02:00
bcm27xx
bcm47xx
bcm53xx
bcm63xx
cns3xxx
gemini
generic kernel: cake: backport upstream tweaks & fixes 2020-06-30 16:09:18 +01:00
imx6
ipq40xx ipq40xx: set IMAGES in Device/Default definition 2020-06-28 14:07:43 +02:00
ipq806x ipq806x: set IMAGES in Device/Default definition 2020-06-28 14:07:50 +02:00
ipq807x
kirkwood
lantiq lantiq: remove unused PHY drivers on xrx200 2020-06-27 00:19:13 +02:00
layerscape
malta
mediatek
mpc85xx
mvebu mvebu: move definition of factory.img out of Device/Default 2020-06-28 14:07:57 +02:00
mxs
octeon
octeontx
omap
oxnas
pistachio
ramips ramips: add support for TP-Link RE220 v2 2020-06-30 17:23:32 +02:00
rb532
rockchip
samsung
sunxi
tegra
uml
x86
zynq
Makefile