him411/wlan-ap-Telecominfraproject
1
0
Fork 0
mirror of https://github.com/Telecominfraproject/wlan-ap.git synced 2025-12-17 17:31:27 +00:00
Code Issues Packages Projects Releases Wiki Activity
1,018 Commits 200 Branches 115 Tags 227 MiB
1e82a24192
Commit Graph

153 Commits

Author SHA1 Message Date
John Crispin
7e4030c0bc ipq807x: add yuncore fap655 support 
Signed-off-by: John Crispin <john@phrozen.org>
 2023-06-04 12:36:46 +02:00
Ken
87dbd3e289 ipq807x: various improvements for CIG-WF-186w 
1. Using rtl8367c.c file for rtl8367S switch driver  to support vlan 
2. Configure eth0.1 as WAN and eth0.2 as LAN
3. Add mdio read/write in smi driver  followed 5.4 kernel driver
4. add mido clock setting followed 5.4 kernel driver for 186w board
5. Add eth and wifi mac address allocation based of BaseMacAddress
6. Update new bdf for 2G radio

Fixes: WIFI-12650
Signed-off-by: Ken <xshi@actiontec.com>
 2023-06-01 08:58:14 +02:00
John Crispin
cd3fb41eb0 ipq807x: update wf196ca 6G BDF file 
Fixes: WIFI-12538
Signed-off-by: John Crispin <john@phrozen.org>
 2023-05-30 07:56:09 +02:00
Felix Fietkau
d9adc8f7a1 hostapd: fix double free in coa-multi patch 
Fixes: WIFI-12586
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-05-30 07:56:09 +02:00
Felix Fietkau
acc3d67cff wifi-ax: fix mac80211 crash when dealing with AP vlans 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2023-05-30 07:56:09 +02:00
Venkata Chimata
4a6bc07d61 ipq50xx: Addp support for Cybertan EWW631-A1 and EWW631-B1 APs 
EWW631-A1 (Ceiling mount)

Specifications are:

* CPU: Qualcomm IPQ5018
* RAM: 512 MB
* Storage:  256MB NAND-optional.
* Ethernet: 1x GbE
* UART header
* WLAN: 2.4GHz: IPQ5018, 5GHz:  QCN6102
* 3x LED-s à R/G/B PWM control

 Installation instructions:
Connect to UART, pins are like this

XA/XB PCBA UART :
PIN #5   |  #4 |  #3  |  #2  |  #1
GND | x | RX | TX | VCC

XC PCBA UART : (next version hardware board)
PIN  #4  |   #3  |  #2   |  #1
GND | RX | TX | VCC

Settings are 115200 8n1

1. Copy openwrt-ipq807x-cybertan_eww631_a1-squashfs-nand-factory.bin onto the board into /tmp/
2. At board's command prompt, issue sysupgrade -n /tmp/openwrt-ipq807x-cybertan_eww631_a1-squashfs-nand-factory.bin

-----------------------------------------------------------------------

EWW631-B1 (Wall mount)

Specifications are:

* CPU: Qualcomm IPQ5000
* RAM: 256 MB (IPQ5000 inside)
* Storage:  256MB NAND-optional.
* Ethernet: 4x GbE
* UART header
* WLAN: 2.4GHz: IPQ5000, 5GHz:  QCN6102
* 3x LED-s à R/G/B PWM control

Installation instructions:
Connect to UART, pins are like this

Fixes: WIFI-12579
Signed-off-by: Venkata Chimata <venkata@shasta.cloud>
 2023-05-30 07:56:08 +02:00
Kishan Shukla
39b1211541 ipq807x: Add ION4XI_WP support 
Fixes: WIFI-12581
Signed-off-by: Kishan Shukla <kishan.shukla@hfcl.com>
 2023-05-08 10:56:18 +02:00
John Crispin
1f9a41b386 mac80211/ath11k: fix num_iface_combinations 
Fixes: WIFI-12019
Signed-off-by: John Crispin <john@phrozen.org>
 2023-04-24 17:51:34 +02:00
Ken
5c84541011 ipq807x: Add WF-186w support 
Add WF-186w support

Signed-off-by: Ken <xshi@actiontec.com>
 2023-04-10 14:25:48 +02:00
John Crispin
26192989cd ipq807x: add CIG WF196 BDF 
split the image into 2 SKUs for CA/US.

Fixes: WIFI-12357
Signed-off-by: John Crispin <john@phrozen.org>
 2023-03-09 15:14:36 +01:00
John Crispin
5171b52570 hostapd: do not use ubus return codes as auth/assoc errors 
Fixes: WIFI-12330
Signed-off-by: John Crispin <john@phrozen.org>
 2023-02-27 13:06:32 +01:00
John Crispin
5013b9c7fe ipq807x: update WF196 BDF files 
Fixes: WIFI-12333
Signed-off-by: John Crispin <john@phrozen.org>
 2023-02-24 15:14:50 +01:00
Ken
43fa167f14 ipq807x: Add WF-660a support 
Fixes: WIFI-12280
Signed-off-by: Ken <xshi@actiontec.com>
 2023-02-22 10:03:05 +01:00
John Crispin
1e3cef1a26 mac80211: backport 230-get_txpower.patch 
Signed-off-by: John Crispin <john@phrozen.org>
 2023-02-15 15:46:39 +01:00
Ravi Vaishnav
cacb8a23dd hostapd: Code for secondary RADIUS 
Signed-off-by: Ravi Vaishnav <ravi.vaishnav@netexperience.com>
 2023-02-05 09:41:55 +01:00
John Crispin
8f53da4f79 hostapd: make radius rate-limit work with new event listener framework 
Signed-off-by: John Crispin <john@phrozen.org>
 2023-01-27 12:18:37 +01:00
John Crispin
fbcfddfbdc initial events support 
Signed-off-by: John Crispin <john@phrozen.org>
 2023-01-27 12:18:37 +01:00
John Crispin
4967fcd2be hostapd: improve multi CoA support 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-12-18 15:25:27 +01:00
John Crispin
e973110de7 ath11k: fix mac assignment on cig wf196 
Fixes: WIFI-11976
Signed-off-by: John Crispin <john@phrozen.org>
 2022-12-17 10:43:04 +01:00
John Crispin
e42051d3a9 hostapd: add dynamic_own_ip support 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-12-15 12:03:31 +01:00
John Crispin
5567de89e6 ipq807x: add yuncore fap650 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-12-08 10:12:54 +01:00
John Crispin
74ea7a7a1e ucentral-schema: update to latest HEAD 
efd60c9 add maximum_clients_ignore_probe support

Signed-off-by: John Crispin <john@phrozen.org>
 2022-11-29 14:30:54 +01:00
John Crispin
8e2f2fcce3 hostapd: add dynamic_probe_resp support 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-11-23 09:00:38 +01:00
John Crispin
a3d348b664 ipq807x: add initial support for MUXI AP3220L 
Hardware:
* SoC: Qcom IPQ5018
* RAM: 512MB
* Flash: 4MB Nor + 128MB Nand
* Ethernet: 2x GbE
* WLAN: 2x2 2.4GHz 574Mbps(builtin) + 2x2 5GHz 2400Mbps(qcn6122)
* BT: BT5.1(builtin) / nrf52840(option)
* LEDS: 1x power, 1x 2G, 1x 5G
* Buttons: 1x reset
* USB: 1x 2.0(Type-A)
* Power: DC 12V/2A, PoE 48V/0.6A
* UART: 1x RJ45

Flash instruction under U-Boot:
tftpboot 0x44000000 openwrt-ipq807x-muxi_ap3220l-squashfs-nand-factory.bin
imxtract 0x44000000 ubi
flash rootfs
reset

Signed-off-by: angliu-muxi <ang.liu@muxi-connect.com>
 2022-11-14 09:21:06 +01:00
Isaev Ruslan
17bb88b67a ipq807x: wifi-ax/ath11-firmware/Makefile yuncore ax840 fix This define recipe for yuncore ax840 device to copy firmware to the correct location. 
Signed-off-by: Isaev Ruslan <legale.legale@gmail.com>
 2022-11-14 07:47:20 +01:00
Venkat Chimata
e41818470f Updating the board files for Liteon WPX8324. 
Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
 2022-11-14 07:47:20 +01:00
John Crispin
bea3d2c4f8 usteer2: add new package 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-11-14 07:47:20 +01:00
John Crispin
521df1a142 mac80211-ax: add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 
Rekeying PTK for STA 2e:54:0a:55:25:c6 but driver can't safely do that.
Rekeying PTK for STA 48:26:2c:3e:b0:f4 but driver can't safely do that.
ath11k c000000.wifi: failed to flush transmit queue 0

Fixes: WIFI-11004
Signed-off-by: John Crispin <john@phrozen.org>
 2022-10-28 16:32:53 +02:00
John Crispin
0272d4bcad hostapd: AAA WISPr rates are sent as mbit 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-10-17 15:35:20 -04:00
Venkat Chimata
324df56861 ipq50xx: Addp support for Liteon WPX8324 AP 
Specifications are:
* CPU: Qualcomm IPQ5018
* RAM: 512 MB
* Storage: 16MB ROR, 128MB NAND-optional.
* Ethernet: 2x GBe
* UART header
* WLAN: QCN6122 + QCN8080
* 3x LED-s

Installation instructions:
Connect to UART, pins are like this (from the edge on LEDS):
-> GND | RX | TX | GND | VCC

Settings are 115200 8n1

1. Copy openwrt-ipq807x-liteon_wpx8324-squashfs-nand-factory.bin (attached) onto the board into /tmp/
2. At board's command prompt, issue sysupgrade -n /tmp/openwrt-ipq807x-liteon_wpx8324-squashfs-nand-factory.bin

Fixes: WIFI-10929
Signed-off-by: Venkat Chimata <venkata@shasta.cloud>
 2022-10-05 16:25:14 +02:00
John Crispin
393db0ec2a mac80211: fix typo 
The detection of multi_bssid was using bad syntx, this caused the wifi MAC
of some boards to change.

Signed-off-by: John Crispin <john@phrozen.org>
 2022-10-04 07:21:27 +02:00
Sohail Ahmad
c56b7adea8 ipq807x: Support for Indio WiFi6 AP -indoor and outdoor models based on IPQ6000 
Fixes: WIFI-10802
Signed-off-by: Sohail Ahmad <sohail.ahmad@wifi-soft.com>
 2022-09-26 22:06:53 +02:00
Felix Fietkau
daaed910da wifi-ax: backport mac80211 WME classification fix 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2022-09-26 22:06:53 +02:00
John Crispin
bf6abd80dd mac80211: fix multiple bssid mac addresses 
Fixes: WIFI-10596
Signed-off-by: John Crispin <john@phrozen.org>
 2022-09-26 22:06:53 +02:00
Krishna
888aa40057 ipq807x: Add support for Mesh++ S618 devices 
Mesh++ S618 has below products based on Qualcomm IPQ6018:

  * cp03-c1
  * cp01-c1

These are Wi-Fi 6 (IEEE 80211.ax) dual band 2x2 mesh routers.

Fixes: WIFI-10561
Signed-off-by: Krishna <krishna@meshplusplus.com>
Signed-off-by: Edward Cheung <edward@meshplusplus.com>
Signed-off-by: Alex Ballmer <alexb@meshplusplus.com>
 2022-09-08 12:49:58 +02:00
John Crispin
cb7ed7a37b hostapd: backport multicast_to_unicast patch 
Fixes: WIFI-10766
Signed-off-by: John Crispin <john@phrozen.org>
 2022-09-08 12:49:27 +02:00
John Crispin
a8bb06fb1c ath1kk-wifi: update the WF188n BDF file 
This is the BDF that passed FCC certification.

Signed-off-by: John Crispin <john@phrozen.org>
 2022-09-08 12:49:27 +02:00
John Crispin
87adc56e60 ipq807x: make wifi 6e work on wallytech dr6018-v4 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-25 10:01:28 +02:00
John Crispin
0f8be3bbde hostapd: do not enforce multiple_bssid on 6G band 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-24 10:28:39 +02:00
John Crispin
a3fc407f25 hostapd: manually generate roaming keys when SAE is used 
Fixes: WIFI-10570
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-23 17:09:08 +02:00
John Crispin
cf18242ee5 mac80211-qsdk: default multiple_ssid to 1 if not set 
Fixes: WIFI-10597
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-23 09:14:06 +02:00
John Crispin
812fb18160 ath11k-wifi: update cig wf196 BDF files to latest FCC version 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-22 10:36:10 +02:00
Kishan
0571cc73da ath11k-wifi: add hfcl-ion4xi specific BDF 
Signed-off-by: Kishan Shukla <kishan.shukla@hfcl.com>
 2022-08-22 10:36:08 +02:00
John Crispin
0603953d9f hostapd: add multi CoA support 
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-19 08:17:00 +02:00
John Crispin
8686846a09 hostapd: backport several CVE fixes 
Fixes: WIFI-10412
Signed-off-by: John Crispin <john@phrozen.org>
 2022-08-15 11:41:41 +02:00
Sven Eckelmann
cc54c8654f ipq807x: Add support for Plasma Cloud PAX1800 v2 
Device specifications:
======================

* Qualcomm IPQ6000
* 512 MB of RAM
* 64 MB of SPI NOR flash
  - 2x 28 MB available; but one of the 28 MB regions is the recovery image
* 2T2R 2.4 GHz Wi-Fi (11ax)
* 2T2R 5 GHz Wi-Fi (11ax)
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board
* 2x ethernet
  - eth0
    + 1000 Mbps Ethernet
    + used as LAN interface
  - eth1
    + 1000 Mbps Ethernet
    + 802.3at POE
    + used as WAN interface
* 12 2A DC
* internal antennas

Flashing instructions:
======================

Various methods can be used to install the actual image on the flash.
Two easy ones are:

ap51-flash
----------

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.

initramfs from TFTP
-------------------

The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):

   setenv serverip 192.168.1.21
   setenv ipaddr 192.168.1.1
   setenv bootargs 'console=ttyMSM0,115200n8 rootfstype=squashfs,jffs2 board=PAX1800v2 root=31:10 mtdparts=spi32766.0:768k(0:SBL1),64k(0:MIBIB),1664k(0:QSEE),64k(0:DEVCFG),128k(0:RPM),64k(0:CDT),64k(0:APPSBLENV),640k(0:APPSBL),256k(0:ART),28672k(inactive),28672k(inactive2),64k(custom),64k(0:KEYS),2304k(0:WIFIFW)'
   tftpboot <filename-of-initramfs-kernel>.bin && bootm

The actual sysupgrade image can then be transferred (on the LAN port) to the
device via

  scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/

On the device, the sysupgrade must then be started using

  sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin

Signed-off-by: Sven Eckelmann <sven@narfation.org>
 2022-08-10 06:45:51 +02:00
Jianhui Zhao
7e2cec9d91 ath11k-wifi: update GL-AXT1800 BDF 
Signed-off-by: Jianhui Zhao <jianhui.zhao@gl-inet.com>
 2022-07-11 07:42:23 +02:00
John Crispin
0d50975152 hostapd: backport OWE patches 
Fixes: WIFI-9811
Signed-off-by: John Crispin <john@phrozen.org>
 2022-06-30 12:19:41 +02:00
John Crispin
6d87847d15 radius-gw-proxy: update to latest HEAD 
Fixes: WIFI-9620
Signed-off-by: John Crispin <john@phrozen.org>
 2022-06-30 12:19:41 +02:00
John Crispin
cb30d9e20a ipq807x: add motorola q14 support 
Fixes: WIFI-8040
Signed-off-by: John Crispin <john@phrozen.org>
 2022-06-15 12:42:34 +02:00