From a297f43a9ad6d8c95cf8b984337ffb410f3eb92c Mon Sep 17 00:00:00 2001 From: Maharaja Kennadyrajan Date: Tue, 12 Jan 2021 18:07:51 +0530 Subject: [PATCH] ath11k: Add support for beacon tx mode User can configure the beacon tx mode while bring-up the AP via hostapd configuration. Use the below configuration in the hostapd to configure the beacon tx mode. "beacon_tx_mode=N", where N = 0 for STAGGERED beacon mode and N = 1 for BURST beacon mode. Signed-off-by: Maharaja Kennadyrajan --- drivers/net/wireless/ath/ath11k/mac.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -3050,7 +3050,10 @@ static void ath11k_mac_op_bss_info_chang if (changed & BSS_CHANGED_BEACON) { param_id = WMI_PDEV_PARAM_BEACON_TX_MODE; - param_value = WMI_BEACON_STAGGERED_MODE; + if (info->beacon_tx_mode == NL80211_BEACON_BURST_MODE) + param_value = WMI_BEACON_BURST_MODE; + else + param_value = WMI_BEACON_STAGGERED_MODE; ret = ath11k_wmi_pdev_set_param(ar, param_id, param_value, ar->pdev->pdev_id); if (ret) @@ -3058,8 +3061,9 @@ static void ath11k_mac_op_bss_info_chang arvif->vdev_id); else ath11k_dbg(ar->ab, ATH11K_DBG_MAC, - "Set staggered beacon mode for VDEV: %d\n", - arvif->vdev_id); + "Set %s beacon mode for VDEV: %d mode: %d\n", + param_value ? "burst" : "staggered", + arvif->vdev_id, param_value); if (!arvif->do_not_send_tmpl || !arvif->bcca_zero_sent) { ret = ath11k_mac_setup_bcn_tmpl(arvif);